// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.6.12;
interface IZeroEx {
    function getFunctionImplementation(bytes4 _signature) external returns (address);
}// SPDX-License-Identifier: GPL-3.0
pragma solidity 0.6.12;
pragma experimental ABIEncoderV2;
import "./IZeroEx.sol";
import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "@0x/contracts-zero-ex/contracts/src/errors/LibProxyRichErrors.sol";
import "@openzeppelin/contracts/token/ERC20/IERC20.sol";
import "@openzeppelin/contracts/token/ERC20/SafeERC20.sol";
import "@openzeppelin/contracts/access/Ownable.sol";
/// @title Coinbase proxy contract for 0x proxy
/// @dev A generic proxy contract which extracts a fee before delegation
contract ZeroExProxy is Ownable {
    using LibBytesV06 for bytes;
    using SafeERC20 for IERC20;
    using SafeMath for uint256;
    address private constant _ETH_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
    address private constant _NULL_ADDRESS = 0x0000000000000000000000000000000000000000;
    address payable private _beneficiary;
    address payable private _allowanceTarget;
    IZeroEx private _zeroEx;
    mapping(bytes4 => address) private _implementationOverrides;
    event BeneficiaryChanged(address indexed beneficiary);
    event ImplementationOverrideSet(bytes4 indexed signature, address indexed implementation);
    event AllowanceTargetChanged(address indexed allowanceTarget);
    event ZeroExChanged(address indexed zeroEx);
    /// @dev Construct this contract and specify a fee beneficiary, 0x proxy contract address, and allowance target
    constructor(
        IZeroEx zeroEx, 
        address payable allowanceTarget, 
        address payable beneficiary
    ) public {
        _zeroEx = zeroEx;
        _allowanceTarget = allowanceTarget;
        _beneficiary = beneficiary;
    }
    /// @dev Fallback for just receiving ether.
    receive() external payable {}
    /// @dev Delegates calls to the specified implementation contract and extracts a fee based on provided arguments
    /// @param msgData The byte data representing a swap using the original ZeroEx contract. This is either recieved from the 0x API directly or we construct it in order to perform a Uniswap trade
    /// @param feeToken The ERC20 we wish to extract a user fee from. If this is ETH it should be the standard 0xeee ETH address
    /// @param fee Fee amount collected and sent to the beneficiary
    function optimalSwap(
        bytes calldata msgData, 
        address feeToken, 
        uint256 fee
    ) external payable returns (bytes memory) {
        _payFees(feeToken, fee);
        bytes4 signature = msgData.readBytes4(0);
        address target = getFunctionImplementation(signature);
        if (target == address(0)) {
            _revertWithData(LibProxyRichErrors.NotImplementedError(signature));
        }
        (bool success, bytes memory resultData) = target.delegatecall(msgData);
        if (!success) {
            _revertWithData(resultData);
        }
        _returnWithData(resultData);
    }
    /// @dev Forwards calls to the zeroEx contract and extracts a fee based on provided arguments
    /// @param msgData The byte data representing a swap using the original ZeroEx contract. This is either recieved from the 0x API directly or we construct it in order to perform a Uniswap trade
    /// @param feeToken The ERC20 we wish to extract a user fee from. If this is ETH it should be the standard 0xeee ETH address
    /// @param inputToken The ERC20 the user is selling. If this is ETH it should be the standard 0xeee ETH address
    /// @param inputAmount The amount of _inputToken being sold
    /// @param outputToken The ERC20 the user is buying. If this is ETH it should be the standard 0xeee ETH address
    /// @param fee Fee amount collected and sent to the beneficiary
    function proxiedSwap(
        bytes calldata msgData, 
        address feeToken, 
        address inputToken, 
        uint256 inputAmount, 
        address outputToken, 
        uint256 fee
    ) external payable returns (bytes memory) {
        _payFees(feeToken, fee);
        uint256 value = 0;
        if (inputToken == _ETH_ADDRESS) {
            if (feeToken == _ETH_ADDRESS) {
                require(msg.value == inputAmount.add(fee),"Insufficient value with fee");
            }
            else {
                require(msg.value == inputAmount, "Insufficient value");
            }
            value = inputAmount;
        }
        else {
            _sendERC20(IERC20(inputToken), msg.sender, address(this), inputAmount);
            uint256 allowedAmount = IERC20(inputToken).allowance(address(this), _allowanceTarget);
            if (allowedAmount < inputAmount) {
                IERC20(inputToken).safeIncreaseAllowance(_allowanceTarget, inputAmount.sub(allowedAmount));
            }
        }
        (bool success, bytes memory resultData) = address(_zeroEx).call{value: value}(msgData);
        if (!success) {
            _revertWithData(resultData);
        }
        if (outputToken == _ETH_ADDRESS) {
            if (address(this).balance > 0) {
                _sendETH(msg.sender, address(this).balance);
            } else {
                _revertWithData(resultData);
            }
        } else {
            uint256 tokenBalance = IERC20(outputToken).balanceOf(address(this));
            if (tokenBalance > 0) {
                IERC20(outputToken).safeTransfer(msg.sender, tokenBalance);
            } else {
                _revertWithData(resultData);
            }
        }
        _returnWithData(resultData);
    }
    /// @dev Set a new 0x proxy contract address
    /// @param newZeroEx New 0x proxy address
    function setZeroEx(IZeroEx newZeroEx) public onlyOwner{
        require(address(newZeroEx) != _NULL_ADDRESS, "Invalid zeroEx address");
        _zeroEx = newZeroEx;
        emit ZeroExChanged(address(_zeroEx));
    }
    /// @dev Set a new new allowance target address 
    /// @param newAllowanceTarget New allowance target address
    function setAllowanceTarget(address payable newAllowanceTarget) public onlyOwner {
        require(newAllowanceTarget != _NULL_ADDRESS, "Invalid allowance target");
        _allowanceTarget = newAllowanceTarget;
        emit AllowanceTargetChanged(_allowanceTarget);
    }
    /// @dev Set a new beneficiary address 
    /// @param beneficiary New beneficiary target address
    function setBeneficiary(address payable beneficiary) public onlyOwner {
        require(beneficiary != _NULL_ADDRESS, "Invalid beneficiary");
        _beneficiary = beneficiary;
        emit BeneficiaryChanged(_beneficiary);
    }
    /// @dev Set a custom implementation feature  
    /// @param signature function signature
    /// @param implementation address of the custom feature
    function setImplementationOverride(bytes4 signature, address implementation) public onlyOwner {
        _implementationOverrides[signature] = implementation;
        emit ImplementationOverrideSet(signature, implementation);
    }
    /// @dev Get function implementation address based on signature 
    /// @param signature function signature
    /// @return impl address of implementation
    function getFunctionImplementation(bytes4 signature) public returns (address impl) {
        impl = _implementationOverrides[signature];
        if (impl == _NULL_ADDRESS) {
            impl = _zeroEx.getFunctionImplementation(signature);
        }
    }
    function getBeneficiary() public view returns(address) {
        return _beneficiary;
    }
    function getAllowanceTarget() public view returns(address){
        return _allowanceTarget;
    }
    function getZeroEx() public view returns(IZeroEx) {
        return _zeroEx;
    }
    /// @dev Pay fee to beneficiary 
    /// @param token token address to pay fee in, can be ETH
    /// @param amount fee amount to pay
    function _payFees(address token, uint256 amount) private {
        if (token == _ETH_ADDRESS) {
            return _sendETH(_beneficiary, amount);
        }
        return _sendERC20(IERC20(token), msg.sender, _beneficiary, amount);
    }
    function _sendETH(address payable toAddress, uint256 amount) private {
        if (amount > 0) {
            (bool success,) = toAddress.call{ value: amount }("");
            require(success, "Unable to send ETH");
        }
    }
    function _sendERC20(IERC20 token, address fromAddress, address toAddress, uint256 amount) private {
        if (amount > 0) {
            token.safeTransferFrom(fromAddress, toAddress, amount);
        }
    }
    /// @dev Revert with arbitrary bytes.
    /// @param data Revert data.
    function _revertWithData(bytes memory data) private pure {
        assembly { revert(add(data, 32), mload(data)) }
    }
    /// @dev Return with arbitrary bytes.
    /// @param data Return data.
    function _returnWithData(bytes memory data) private pure {
        assembly { return(add(data, 32), mload(data)) }
    }
}// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./errors/LibBytesRichErrorsV06.sol";
import "./errors/LibRichErrorsV06.sol";
library LibBytesV06 {
    using LibBytesV06 for bytes;
    /// @dev Gets the memory address for a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of byte array. This
    ///         points to the header of the byte array which contains
    ///         the length.
    function rawAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := input
        }
        return memoryAddress;
    }
    /// @dev Gets the memory address for the contents of a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of the contents of the byte array.
    function contentAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := add(input, 32)
        }
        return memoryAddress;
    }
    /// @dev Copies `length` bytes from memory location `source` to `dest`.
    /// @param dest memory address to copy bytes to.
    /// @param source memory address to copy bytes from.
    /// @param length number of bytes to copy.
    function memCopy(
        uint256 dest,
        uint256 source,
        uint256 length
    )
        internal
        pure
    {
        if (length < 32) {
            // Handle a partial word by reading destination and masking
            // off the bits we are interested in.
            // This correctly handles overlap, zero lengths and source == dest
            assembly {
                let mask := sub(exp(256, sub(32, length)), 1)
                let s := and(mload(source), not(mask))
                let d := and(mload(dest), mask)
                mstore(dest, or(s, d))
            }
        } else {
            // Skip the O(length) loop when source == dest.
            if (source == dest) {
                return;
            }
            // For large copies we copy whole words at a time. The final
            // word is aligned to the end of the range (instead of after the
            // previous) to handle partial words. So a copy will look like this:
            //
            //  ####
            //      ####
            //          ####
            //            ####
            //
            // We handle overlap in the source and destination range by
            // changing the copying direction. This prevents us from
            // overwriting parts of source that we still need to copy.
            //
            // This correctly handles source == dest
            //
            if (source > dest) {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because it
                    // is easier to compare with in the loop, and these
                    // are also the addresses we need for copying the
                    // last bytes.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)
                    // Remember the last 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the last bytes in
                    // source already due to overlap.
                    let last := mload(sEnd)
                    // Copy whole words front to back
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} lt(source, sEnd) {} {
                        mstore(dest, mload(source))
                        source := add(source, 32)
                        dest := add(dest, 32)
                    }
                    // Write the last 32 bytes
                    mstore(dEnd, last)
                }
            } else {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because those
                    // are the starting points when copying a word at the end.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)
                    // Remember the first 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the first bytes in
                    // source already due to overlap.
                    let first := mload(source)
                    // Copy whole words back to front
                    // We use a signed comparisson here to allow dEnd to become
                    // negative (happens when source and dest < 32). Valid
                    // addresses in local memory will never be larger than
                    // 2**255, so they can be safely re-interpreted as signed.
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} slt(dest, dEnd) {} {
                        mstore(dEnd, mload(sEnd))
                        sEnd := sub(sEnd, 32)
                        dEnd := sub(dEnd, 32)
                    }
                    // Write the first 32 bytes
                    mstore(dest, first)
                }
            }
        }
    }
    /// @dev Returns a slices from a byte array.
    /// @param b The byte array to take a slice from.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    function slice(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        // Ensure that the from and to positions are valid positions for a slice within
        // the byte array that is being used.
        if (from > to) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.FromLessThanOrEqualsToRequired,
                from,
                to
            ));
        }
        if (to > b.length) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.ToLessThanOrEqualsLengthRequired,
                to,
                b.length
            ));
        }
        // Create a new bytes structure and copy contents
        result = new bytes(to - from);
        memCopy(
            result.contentAddress(),
            b.contentAddress() + from,
            result.length
        );
        return result;
    }
    /// @dev Returns a slice from a byte array without preserving the input.
    ///      When `from == 0`, the original array will match the slice.
    ///      In other cases its state will be corrupted.
    /// @param b The byte array to take a slice from. Will be destroyed in the process.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    function sliceDestructive(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        // Ensure that the from and to positions are valid positions for a slice within
        // the byte array that is being used.
        if (from > to) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.FromLessThanOrEqualsToRequired,
                from,
                to
            ));
        }
        if (to > b.length) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.ToLessThanOrEqualsLengthRequired,
                to,
                b.length
            ));
        }
        // Create a new bytes structure around [from, to) in-place.
        assembly {
            result := add(b, from)
            mstore(result, sub(to, from))
        }
        return result;
    }
    /// @dev Pops the last byte off of a byte array by modifying its length.
    /// @param b Byte array that will be modified.
    /// @return result The byte that was popped off.
    function popLastByte(bytes memory b)
        internal
        pure
        returns (bytes1 result)
    {
        if (b.length == 0) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanZeroRequired,
                b.length,
                0
            ));
        }
        // Store last byte.
        result = b[b.length - 1];
        assembly {
            // Decrement length of byte array.
            let newLen := sub(mload(b), 1)
            mstore(b, newLen)
        }
        return result;
    }
    /// @dev Tests equality of two byte arrays.
    /// @param lhs First byte array to compare.
    /// @param rhs Second byte array to compare.
    /// @return equal True if arrays are the same. False otherwise.
    function equals(
        bytes memory lhs,
        bytes memory rhs
    )
        internal
        pure
        returns (bool equal)
    {
        // Keccak gas cost is 30 + numWords * 6. This is a cheap way to compare.
        // We early exit on unequal lengths, but keccak would also correctly
        // handle this.
        return lhs.length == rhs.length && keccak256(lhs) == keccak256(rhs);
    }
    /// @dev Reads an address from a position in a byte array.
    /// @param b Byte array containing an address.
    /// @param index Index in byte array of address.
    /// @return result address from byte array.
    function readAddress(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (address result)
    {
        if (b.length < index + 20) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsTwentyRequired,
                b.length,
                index + 20 // 20 is length of address
            ));
        }
        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;
        // Read address from array memory
        assembly {
            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 20-byte mask to obtain address
            result := and(mload(add(b, index)), 0xffffffffffffffffffffffffffffffffffffffff)
        }
        return result;
    }
    /// @dev Writes an address into a specific position in a byte array.
    /// @param b Byte array to insert address into.
    /// @param index Index in byte array of address.
    /// @param input Address to put into byte array.
    function writeAddress(
        bytes memory b,
        uint256 index,
        address input
    )
        internal
        pure
    {
        if (b.length < index + 20) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsTwentyRequired,
                b.length,
                index + 20 // 20 is length of address
            ));
        }
        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;
        // Store address into array memory
        assembly {
            // The address occupies 20 bytes and mstore stores 32 bytes.
            // First fetch the 32-byte word where we'll be storing the address, then
            // apply a mask so we have only the bytes in the word that the address will not occupy.
            // Then combine these bytes with the address and store the 32 bytes back to memory with mstore.
            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 12-byte mask to obtain extra bytes occupying word of memory where we'll store the address
            let neighbors := and(
                mload(add(b, index)),
                0xffffffffffffffffffffffff0000000000000000000000000000000000000000
            )
            // Make sure input address is clean.
            // (Solidity does not guarantee this)
            input := and(input, 0xffffffffffffffffffffffffffffffffffffffff)
            // Store the neighbors and address into memory
            mstore(add(b, index), xor(input, neighbors))
        }
    }
    /// @dev Reads a bytes32 value from a position in a byte array.
    /// @param b Byte array containing a bytes32 value.
    /// @param index Index in byte array of bytes32 value.
    /// @return result bytes32 value from byte array.
    function readBytes32(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes32 result)
    {
        if (b.length < index + 32) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsThirtyTwoRequired,
                b.length,
                index + 32
            ));
        }
        // Arrays are prefixed by a 256 bit length parameter
        index += 32;
        // Read the bytes32 from array memory
        assembly {
            result := mload(add(b, index))
        }
        return result;
    }
    /// @dev Writes a bytes32 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input bytes32 to put into byte array.
    function writeBytes32(
        bytes memory b,
        uint256 index,
        bytes32 input
    )
        internal
        pure
    {
        if (b.length < index + 32) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsThirtyTwoRequired,
                b.length,
                index + 32
            ));
        }
        // Arrays are prefixed by a 256 bit length parameter
        index += 32;
        // Read the bytes32 from array memory
        assembly {
            mstore(add(b, index), input)
        }
    }
    /// @dev Reads a uint256 value from a position in a byte array.
    /// @param b Byte array containing a uint256 value.
    /// @param index Index in byte array of uint256 value.
    /// @return result uint256 value from byte array.
    function readUint256(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (uint256 result)
    {
        result = uint256(readBytes32(b, index));
        return result;
    }
    /// @dev Writes a uint256 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input uint256 to put into byte array.
    function writeUint256(
        bytes memory b,
        uint256 index,
        uint256 input
    )
        internal
        pure
    {
        writeBytes32(b, index, bytes32(input));
    }
    /// @dev Reads an unpadded bytes4 value from a position in a byte array.
    /// @param b Byte array containing a bytes4 value.
    /// @param index Index in byte array of bytes4 value.
    /// @return result bytes4 value from byte array.
    function readBytes4(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes4 result)
    {
        if (b.length < index + 4) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsFourRequired,
                b.length,
                index + 4
            ));
        }
        // Arrays are prefixed by a 32 byte length field
        index += 32;
        // Read the bytes4 from array memory
        assembly {
            result := mload(add(b, index))
            // Solidity does not require us to clean the trailing bytes.
            // We do it anyway
            result := and(result, 0xFFFFFFFF00000000000000000000000000000000000000000000000000000000)
        }
        return result;
    }
    /// @dev Writes a new length to a byte array.
    ///      Decreasing length will lead to removing the corresponding lower order bytes from the byte array.
    ///      Increasing length may lead to appending adjacent in-memory bytes to the end of the byte array.
    /// @param b Bytes array to write new length to.
    /// @param length New length of byte array.
    function writeLength(bytes memory b, uint256 length)
        internal
        pure
    {
        assembly {
            mstore(b, length)
        }
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibBytesRichErrorsV06 {
    enum InvalidByteOperationErrorCodes {
        FromLessThanOrEqualsToRequired,
        ToLessThanOrEqualsLengthRequired,
        LengthGreaterThanZeroRequired,
        LengthGreaterThanOrEqualsFourRequired,
        LengthGreaterThanOrEqualsTwentyRequired,
        LengthGreaterThanOrEqualsThirtyTwoRequired,
        LengthGreaterThanOrEqualsNestedBytesLengthRequired,
        DestinationLengthGreaterThanOrEqualSourceLengthRequired
    }
    // bytes4(keccak256("InvalidByteOperationError(uint8,uint256,uint256)"))
    bytes4 internal constant INVALID_BYTE_OPERATION_ERROR_SELECTOR =
        0x28006595;
    // solhint-disable func-name-mixedcase
    function InvalidByteOperationError(
        InvalidByteOperationErrorCodes errorCode,
        uint256 offset,
        uint256 required
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            INVALID_BYTE_OPERATION_ERROR_SELECTOR,
            errorCode,
            offset,
            required
        );
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibRichErrorsV06 {
    // bytes4(keccak256("Error(string)"))
    bytes4 internal constant STANDARD_ERROR_SELECTOR = 0x08c379a0;
    // solhint-disable func-name-mixedcase
    /// @dev ABI encode a standard, string revert error payload.
    ///      This is the same payload that would be included by a `revert(string)`
    ///      solidity statement. It has the function signature `Error(string)`.
    /// @param message The error string.
    /// @return The ABI encoded error.
    function StandardError(string memory message)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            STANDARD_ERROR_SELECTOR,
            bytes(message)
        );
    }
    // solhint-enable func-name-mixedcase
    /// @dev Reverts an encoded rich revert reason `errorData`.
    /// @param errorData ABI encoded error data.
    function rrevert(bytes memory errorData)
        internal
        pure
    {
        assembly {
            revert(add(errorData, 0x20), mload(errorData))
        }
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibProxyRichErrors {
    // solhint-disable func-name-mixedcase
    function NotImplementedError(bytes4 selector)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("NotImplementedError(bytes4)")),
            selector
        );
    }
    function InvalidBootstrapCallerError(address actual, address expected)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidBootstrapCallerError(address,address)")),
            actual,
            expected
        );
    }
    function InvalidDieCallerError(address actual, address expected)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidDieCallerError(address,address)")),
            actual,
            expected
        );
    }
    function BootstrapCallFailedError(address target, bytes memory resultData)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("BootstrapCallFailedError(address,bytes)")),
            target,
            resultData
        );
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "../utils/Context.sol";
/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract Ownable is Context {
    address private _owner;
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor () internal {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }
    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }
    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
        _;
    }
    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }
    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }
    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }
    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }
    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }
    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }
    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);
    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);
    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);
    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);
    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);
    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
import "./IERC20.sol";
import "../../math/SafeMath.sol";
import "../../utils/Address.sol";
/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }
    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }
    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.
        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.2 <0.8.0;
/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.
        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");
        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }
    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }
    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }
    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");
        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }
    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly
                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}
// SPDX-License-Identifier: MIT
pragma solidity >=0.6.0 <0.8.0;
/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }
    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// Copyright (C) 2015, 2016, 2017 Dapphub

// This program is free software: you can redistribute it and/or modify
// it under the terms of the GNU General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.

// This program is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
// GNU General Public License for more details.

// You should have received a copy of the GNU General Public License
// along with this program.  If not, see <http://www.gnu.org/licenses/>.

pragma solidity ^0.4.18;

contract WETH9 {
    string public name     = "Wrapped Ether";
    string public symbol   = "WETH";
    uint8  public decimals = 18;

    event  Approval(address indexed src, address indexed guy, uint wad);
    event  Transfer(address indexed src, address indexed dst, uint wad);
    event  Deposit(address indexed dst, uint wad);
    event  Withdrawal(address indexed src, uint wad);

    mapping (address => uint)                       public  balanceOf;
    mapping (address => mapping (address => uint))  public  allowance;

    function() public payable {
        deposit();
    }
    function deposit() public payable {
        balanceOf[msg.sender] += msg.value;
        Deposit(msg.sender, msg.value);
    }
    function withdraw(uint wad) public {
        require(balanceOf[msg.sender] >= wad);
        balanceOf[msg.sender] -= wad;
        msg.sender.transfer(wad);
        Withdrawal(msg.sender, wad);
    }

    function totalSupply() public view returns (uint) {
        return this.balance;
    }

    function approve(address guy, uint wad) public returns (bool) {
        allowance[msg.sender][guy] = wad;
        Approval(msg.sender, guy, wad);
        return true;
    }

    function transfer(address dst, uint wad) public returns (bool) {
        return transferFrom(msg.sender, dst, wad);
    }

    function transferFrom(address src, address dst, uint wad)
        public
        returns (bool)
    {
        require(balanceOf[src] >= wad);

        if (src != msg.sender && allowance[src][msg.sender] != uint(-1)) {
            require(allowance[src][msg.sender] >= wad);
            allowance[src][msg.sender] -= wad;
        }

        balanceOf[src] -= wad;
        balanceOf[dst] += wad;

        Transfer(src, dst, wad);

        return true;
    }
}


/*
                    GNU GENERAL PUBLIC LICENSE
                       Version 3, 29 June 2007

 Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
 Everyone is permitted to copy and distribute verbatim copies
 of this license document, but changing it is not allowed.

                            Preamble

  The GNU General Public License is a free, copyleft license for
software and other kinds of works.

  The licenses for most software and other practical works are designed
to take away your freedom to share and change the works.  By contrast,
the GNU General Public License is intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.  We, the Free Software Foundation, use the
GNU General Public License for most of our software; it applies also to
any other work released this way by its authors.  You can apply it to
your programs, too.

  When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.

  To protect your rights, we need to prevent others from denying you
these rights or asking you to surrender the rights.  Therefore, you have
certain responsibilities if you distribute copies of the software, or if
you modify it: responsibilities to respect the freedom of others.

  For example, if you distribute copies of such a program, whether
gratis or for a fee, you must pass on to the recipients the same
freedoms that you received.  You must make sure that they, too, receive
or can get the source code.  And you must show them these terms so they
know their rights.

  Developers that use the GNU GPL protect your rights with two steps:
(1) assert copyright on the software, and (2) offer you this License
giving you legal permission to copy, distribute and/or modify it.

  For the developers' and authors' protection, the GPL clearly explains
that there is no warranty for this free software.  For both users' and
authors' sake, the GPL requires that modified versions be marked as
changed, so that their problems will not be attributed erroneously to
authors of previous versions.

  Some devices are designed to deny users access to install or run
modified versions of the software inside them, although the manufacturer
can do so.  This is fundamentally incompatible with the aim of
protecting users' freedom to change the software.  The systematic
pattern of such abuse occurs in the area of products for individuals to
use, which is precisely where it is most unacceptable.  Therefore, we
have designed this version of the GPL to prohibit the practice for those
products.  If such problems arise substantially in other domains, we
stand ready to extend this provision to those domains in future versions
of the GPL, as needed to protect the freedom of users.

  Finally, every program is threatened constantly by software patents.
States should not allow patents to restrict development and use of
software on general-purpose computers, but in those that do, we wish to
avoid the special danger that patents applied to a free program could
make it effectively proprietary.  To prevent this, the GPL assures that
patents cannot be used to render the program non-free.

  The precise terms and conditions for copying, distribution and
modification follow.

                       TERMS AND CONDITIONS

  0. Definitions.

  "This License" refers to version 3 of the GNU General Public License.

  "Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.

  "The Program" refers to any copyrightable work licensed under this
License.  Each licensee is addressed as "you".  "Licensees" and
"recipients" may be individuals or organizations.

  To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy.  The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.

  A "covered work" means either the unmodified Program or a work based
on the Program.

  To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy.  Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.

  To "convey" a work means any kind of propagation that enables other
parties to make or receive copies.  Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.

  An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License.  If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.

  1. Source Code.

  The "source code" for a work means the preferred form of the work
for making modifications to it.  "Object code" means any non-source
form of a work.

  A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.

  The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form.  A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.

  The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities.  However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work.  For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.

  The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.

  The Corresponding Source for a work in source code form is that
same work.

  2. Basic Permissions.

  All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met.  This License explicitly affirms your unlimited
permission to run the unmodified Program.  The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work.  This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.

  You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force.  You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright.  Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.

  Conveying under any other circumstances is permitted solely under
the conditions stated below.  Sublicensing is not allowed; section 10
makes it unnecessary.

  3. Protecting Users' Legal Rights From Anti-Circumvention Law.

  No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.

  When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.

  4. Conveying Verbatim Copies.

  You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.

  You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.

  5. Conveying Modified Source Versions.

  You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:

    a) The work must carry prominent notices stating that you modified
    it, and giving a relevant date.

    b) The work must carry prominent notices stating that it is
    released under this License and any conditions added under section
    7.  This requirement modifies the requirement in section 4 to
    "keep intact all notices".

    c) You must license the entire work, as a whole, under this
    License to anyone who comes into possession of a copy.  This
    License will therefore apply, along with any applicable section 7
    additional terms, to the whole of the work, and all its parts,
    regardless of how they are packaged.  This License gives no
    permission to license the work in any other way, but it does not
    invalidate such permission if you have separately received it.

    d) If the work has interactive user interfaces, each must display
    Appropriate Legal Notices; however, if the Program has interactive
    interfaces that do not display Appropriate Legal Notices, your
    work need not make them do so.

  A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit.  Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.

  6. Conveying Non-Source Forms.

  You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:

    a) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by the
    Corresponding Source fixed on a durable physical medium
    customarily used for software interchange.

    b) Convey the object code in, or embodied in, a physical product
    (including a physical distribution medium), accompanied by a
    written offer, valid for at least three years and valid for as
    long as you offer spare parts or customer support for that product
    model, to give anyone who possesses the object code either (1) a
    copy of the Corresponding Source for all the software in the
    product that is covered by this License, on a durable physical
    medium customarily used for software interchange, for a price no
    more than your reasonable cost of physically performing this
    conveying of source, or (2) access to copy the
    Corresponding Source from a network server at no charge.

    c) Convey individual copies of the object code with a copy of the
    written offer to provide the Corresponding Source.  This
    alternative is allowed only occasionally and noncommercially, and
    only if you received the object code with such an offer, in accord
    with subsection 6b.

    d) Convey the object code by offering access from a designated
    place (gratis or for a charge), and offer equivalent access to the
    Corresponding Source in the same way through the same place at no
    further charge.  You need not require recipients to copy the
    Corresponding Source along with the object code.  If the place to
    copy the object code is a network server, the Corresponding Source
    may be on a different server (operated by you or a third party)
    that supports equivalent copying facilities, provided you maintain
    clear directions next to the object code saying where to find the
    Corresponding Source.  Regardless of what server hosts the
    Corresponding Source, you remain obligated to ensure that it is
    available for as long as needed to satisfy these requirements.

    e) Convey the object code using peer-to-peer transmission, provided
    you inform other peers where the object code and Corresponding
    Source of the work are being offered to the general public at no
    charge under subsection 6d.

  A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.

  A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling.  In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage.  For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product.  A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.

  "Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source.  The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.

  If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information.  But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).

  The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed.  Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.

  Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.

  7. Additional Terms.

  "Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law.  If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.

  When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it.  (Additional permissions may be written to require their own
removal in certain cases when you modify the work.)  You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.

  Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:

    a) Disclaiming warranty or limiting liability differently from the
    terms of sections 15 and 16 of this License; or

    b) Requiring preservation of specified reasonable legal notices or
    author attributions in that material or in the Appropriate Legal
    Notices displayed by works containing it; or

    c) Prohibiting misrepresentation of the origin of that material, or
    requiring that modified versions of such material be marked in
    reasonable ways as different from the original version; or

    d) Limiting the use for publicity purposes of names of licensors or
    authors of the material; or

    e) Declining to grant rights under trademark law for use of some
    trade names, trademarks, or service marks; or

    f) Requiring indemnification of licensors and authors of that
    material by anyone who conveys the material (or modified versions of
    it) with contractual assumptions of liability to the recipient, for
    any liability that these contractual assumptions directly impose on
    those licensors and authors.

  All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10.  If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term.  If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.

  If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.

  Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.

  8. Termination.

  You may not propagate or modify a covered work except as expressly
provided under this License.  Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).

  However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.

  Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.

  Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License.  If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.

  9. Acceptance Not Required for Having Copies.

  You are not required to accept this License in order to receive or
run a copy of the Program.  Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance.  However,
nothing other than this License grants you permission to propagate or
modify any covered work.  These actions infringe copyright if you do
not accept this License.  Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.

  10. Automatic Licensing of Downstream Recipients.

  Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License.  You are not responsible
for enforcing compliance by third parties with this License.

  An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations.  If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.

  You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License.  For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.

  11. Patents.

  A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based.  The
work thus licensed is called the contributor's "contributor version".

  A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version.  For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.

  Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.

  In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement).  To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.

  If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients.  "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.

  If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.

  A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License.  You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.

  Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.

  12. No Surrender of Others' Freedom.

  If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License.  If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all.  For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.

  13. Use with the GNU Affero General Public License.

  Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU Affero General Public License into a single
combined work, and to convey the resulting work.  The terms of this
License will continue to apply to the part which is the covered work,
but the special requirements of the GNU Affero General Public License,
section 13, concerning interaction through a network will apply to the
combination as such.

  14. Revised Versions of this License.

  The Free Software Foundation may publish revised and/or new versions of
the GNU General Public License from time to time.  Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.

  Each version is given a distinguishing version number.  If the
Program specifies that a certain numbered version of the GNU General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation.  If the Program does not specify a version number of the
GNU General Public License, you may choose any version ever published
by the Free Software Foundation.

  If the Program specifies that a proxy can decide which future
versions of the GNU General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.

  Later license versions may give you additional or different
permissions.  However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.

  15. Disclaimer of Warranty.

  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

  16. Limitation of Liability.

  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.

  17. Interpretation of Sections 15 and 16.

  If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.

                     END OF TERMS AND CONDITIONS

            How to Apply These Terms to Your New Programs

  If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.

  To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

    <one line to give the program's name and a brief idea of what it does.>
    Copyright (C) <year>  <name of author>

    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation, either version 3 of the License, or
    (at your option) any later version.

    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details.

    You should have received a copy of the GNU General Public License
    along with this program.  If not, see <http://www.gnu.org/licenses/>.

Also add information on how to contact you by electronic and paper mail.

  If the program does terminal interaction, make it output a short
notice like this when it starts in an interactive mode:

    <program>  Copyright (C) <year>  <name of author>
    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
    This is free software, and you are welcome to redistribute it
    under certain conditions; type `show c' for details.

The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License.  Of course, your program's commands
might be different; for a GUI interface, you would use an "about box".

  You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU GPL, see
<http://www.gnu.org/licenses/>.

  The GNU General Public License does not permit incorporating your program
into proprietary programs.  If your program is a subroutine library, you
may consider it more useful to permit linking proprietary applications with
the library.  If this is what you want to do, use the GNU Lesser General
Public License instead of this License.  But first, please read
<http://www.gnu.org/philosophy/why-not-lgpl.html>.

*/

/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "./migrations/LibBootstrap.sol";
import "./features/Bootstrap.sol";
import "./storage/LibProxyStorage.sol";
import "./errors/LibProxyRichErrors.sol";
/// @dev An extensible proxy contract that serves as a universal entry point for
///      interacting with the 0x protocol.
contract ZeroEx {
    // solhint-disable separate-by-one-line-in-contract,indent,var-name-mixedcase
    using LibBytesV06 for bytes;
    /// @dev Construct this contract and register the `Bootstrap` feature.
    ///      After constructing this contract, `bootstrap()` should be called
    ///      to seed the initial feature set.
    constructor() public {
        // Temporarily create and register the bootstrap feature.
        // It will deregister itself after `bootstrap()` has been called.
        Bootstrap bootstrap = new Bootstrap(msg.sender);
        LibProxyStorage.getStorage().impls[bootstrap.bootstrap.selector] =
            address(bootstrap);
    }
    // solhint-disable state-visibility
    /// @dev Forwards calls to the appropriate implementation contract.
    fallback() external payable {
        bytes4 selector = msg.data.readBytes4(0);
        address impl = getFunctionImplementation(selector);
        if (impl == address(0)) {
            _revertWithData(LibProxyRichErrors.NotImplementedError(selector));
        }
        (bool success, bytes memory resultData) = impl.delegatecall(msg.data);
        if (!success) {
            _revertWithData(resultData);
        }
        _returnWithData(resultData);
    }
    /// @dev Fallback for just receiving ether.
    receive() external payable {}
    // solhint-enable state-visibility
    /// @dev Get the implementation contract of a registered function.
    /// @param selector The function selector.
    /// @return impl The implementation contract address.
    function getFunctionImplementation(bytes4 selector)
        public
        view
        returns (address impl)
    {
        return LibProxyStorage.getStorage().impls[selector];
    }
    /// @dev Revert with arbitrary bytes.
    /// @param data Revert data.
    function _revertWithData(bytes memory data) private pure {
        assembly { revert(add(data, 32), mload(data)) }
    }
    /// @dev Return with arbitrary bytes.
    /// @param data Return data.
    function _returnWithData(bytes memory data) private pure {
        assembly { return(add(data, 32), mload(data)) }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./errors/LibBytesRichErrorsV06.sol";
import "./errors/LibRichErrorsV06.sol";
library LibBytesV06 {
    using LibBytesV06 for bytes;
    /// @dev Gets the memory address for a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of byte array. This
    ///         points to the header of the byte array which contains
    ///         the length.
    function rawAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := input
        }
        return memoryAddress;
    }
    /// @dev Gets the memory address for the contents of a byte array.
    /// @param input Byte array to lookup.
    /// @return memoryAddress Memory address of the contents of the byte array.
    function contentAddress(bytes memory input)
        internal
        pure
        returns (uint256 memoryAddress)
    {
        assembly {
            memoryAddress := add(input, 32)
        }
        return memoryAddress;
    }
    /// @dev Copies `length` bytes from memory location `source` to `dest`.
    /// @param dest memory address to copy bytes to.
    /// @param source memory address to copy bytes from.
    /// @param length number of bytes to copy.
    function memCopy(
        uint256 dest,
        uint256 source,
        uint256 length
    )
        internal
        pure
    {
        if (length < 32) {
            // Handle a partial word by reading destination and masking
            // off the bits we are interested in.
            // This correctly handles overlap, zero lengths and source == dest
            assembly {
                let mask := sub(exp(256, sub(32, length)), 1)
                let s := and(mload(source), not(mask))
                let d := and(mload(dest), mask)
                mstore(dest, or(s, d))
            }
        } else {
            // Skip the O(length) loop when source == dest.
            if (source == dest) {
                return;
            }
            // For large copies we copy whole words at a time. The final
            // word is aligned to the end of the range (instead of after the
            // previous) to handle partial words. So a copy will look like this:
            //
            //  ####
            //      ####
            //          ####
            //            ####
            //
            // We handle overlap in the source and destination range by
            // changing the copying direction. This prevents us from
            // overwriting parts of source that we still need to copy.
            //
            // This correctly handles source == dest
            //
            if (source > dest) {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because it
                    // is easier to compare with in the loop, and these
                    // are also the addresses we need for copying the
                    // last bytes.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)
                    // Remember the last 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the last bytes in
                    // source already due to overlap.
                    let last := mload(sEnd)
                    // Copy whole words front to back
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} lt(source, sEnd) {} {
                        mstore(dest, mload(source))
                        source := add(source, 32)
                        dest := add(dest, 32)
                    }
                    // Write the last 32 bytes
                    mstore(dEnd, last)
                }
            } else {
                assembly {
                    // We subtract 32 from `sEnd` and `dEnd` because those
                    // are the starting points when copying a word at the end.
                    length := sub(length, 32)
                    let sEnd := add(source, length)
                    let dEnd := add(dest, length)
                    // Remember the first 32 bytes of source
                    // This needs to be done here and not after the loop
                    // because we may have overwritten the first bytes in
                    // source already due to overlap.
                    let first := mload(source)
                    // Copy whole words back to front
                    // We use a signed comparisson here to allow dEnd to become
                    // negative (happens when source and dest < 32). Valid
                    // addresses in local memory will never be larger than
                    // 2**255, so they can be safely re-interpreted as signed.
                    // Note: the first check is always true,
                    // this could have been a do-while loop.
                    // solhint-disable-next-line no-empty-blocks
                    for {} slt(dest, dEnd) {} {
                        mstore(dEnd, mload(sEnd))
                        sEnd := sub(sEnd, 32)
                        dEnd := sub(dEnd, 32)
                    }
                    // Write the first 32 bytes
                    mstore(dest, first)
                }
            }
        }
    }
    /// @dev Returns a slices from a byte array.
    /// @param b The byte array to take a slice from.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    function slice(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        // Ensure that the from and to positions are valid positions for a slice within
        // the byte array that is being used.
        if (from > to) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.FromLessThanOrEqualsToRequired,
                from,
                to
            ));
        }
        if (to > b.length) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.ToLessThanOrEqualsLengthRequired,
                to,
                b.length
            ));
        }
        // Create a new bytes structure and copy contents
        result = new bytes(to - from);
        memCopy(
            result.contentAddress(),
            b.contentAddress() + from,
            result.length
        );
        return result;
    }
    /// @dev Returns a slice from a byte array without preserving the input.
    ///      When `from == 0`, the original array will match the slice.
    ///      In other cases its state will be corrupted.
    /// @param b The byte array to take a slice from. Will be destroyed in the process.
    /// @param from The starting index for the slice (inclusive).
    /// @param to The final index for the slice (exclusive).
    /// @return result The slice containing bytes at indices [from, to)
    function sliceDestructive(
        bytes memory b,
        uint256 from,
        uint256 to
    )
        internal
        pure
        returns (bytes memory result)
    {
        // Ensure that the from and to positions are valid positions for a slice within
        // the byte array that is being used.
        if (from > to) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.FromLessThanOrEqualsToRequired,
                from,
                to
            ));
        }
        if (to > b.length) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.ToLessThanOrEqualsLengthRequired,
                to,
                b.length
            ));
        }
        // Create a new bytes structure around [from, to) in-place.
        assembly {
            result := add(b, from)
            mstore(result, sub(to, from))
        }
        return result;
    }
    /// @dev Pops the last byte off of a byte array by modifying its length.
    /// @param b Byte array that will be modified.
    /// @return result The byte that was popped off.
    function popLastByte(bytes memory b)
        internal
        pure
        returns (bytes1 result)
    {
        if (b.length == 0) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanZeroRequired,
                b.length,
                0
            ));
        }
        // Store last byte.
        result = b[b.length - 1];
        assembly {
            // Decrement length of byte array.
            let newLen := sub(mload(b), 1)
            mstore(b, newLen)
        }
        return result;
    }
    /// @dev Tests equality of two byte arrays.
    /// @param lhs First byte array to compare.
    /// @param rhs Second byte array to compare.
    /// @return equal True if arrays are the same. False otherwise.
    function equals(
        bytes memory lhs,
        bytes memory rhs
    )
        internal
        pure
        returns (bool equal)
    {
        // Keccak gas cost is 30 + numWords * 6. This is a cheap way to compare.
        // We early exit on unequal lengths, but keccak would also correctly
        // handle this.
        return lhs.length == rhs.length && keccak256(lhs) == keccak256(rhs);
    }
    /// @dev Reads an address from a position in a byte array.
    /// @param b Byte array containing an address.
    /// @param index Index in byte array of address.
    /// @return result address from byte array.
    function readAddress(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (address result)
    {
        if (b.length < index + 20) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsTwentyRequired,
                b.length,
                index + 20 // 20 is length of address
            ));
        }
        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;
        // Read address from array memory
        assembly {
            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 20-byte mask to obtain address
            result := and(mload(add(b, index)), 0xffffffffffffffffffffffffffffffffffffffff)
        }
        return result;
    }
    /// @dev Writes an address into a specific position in a byte array.
    /// @param b Byte array to insert address into.
    /// @param index Index in byte array of address.
    /// @param input Address to put into byte array.
    function writeAddress(
        bytes memory b,
        uint256 index,
        address input
    )
        internal
        pure
    {
        if (b.length < index + 20) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsTwentyRequired,
                b.length,
                index + 20 // 20 is length of address
            ));
        }
        // Add offset to index:
        // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)
        // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)
        index += 20;
        // Store address into array memory
        assembly {
            // The address occupies 20 bytes and mstore stores 32 bytes.
            // First fetch the 32-byte word where we'll be storing the address, then
            // apply a mask so we have only the bytes in the word that the address will not occupy.
            // Then combine these bytes with the address and store the 32 bytes back to memory with mstore.
            // 1. Add index to address of bytes array
            // 2. Load 32-byte word from memory
            // 3. Apply 12-byte mask to obtain extra bytes occupying word of memory where we'll store the address
            let neighbors := and(
                mload(add(b, index)),
                0xffffffffffffffffffffffff0000000000000000000000000000000000000000
            )
            // Make sure input address is clean.
            // (Solidity does not guarantee this)
            input := and(input, 0xffffffffffffffffffffffffffffffffffffffff)
            // Store the neighbors and address into memory
            mstore(add(b, index), xor(input, neighbors))
        }
    }
    /// @dev Reads a bytes32 value from a position in a byte array.
    /// @param b Byte array containing a bytes32 value.
    /// @param index Index in byte array of bytes32 value.
    /// @return result bytes32 value from byte array.
    function readBytes32(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes32 result)
    {
        if (b.length < index + 32) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsThirtyTwoRequired,
                b.length,
                index + 32
            ));
        }
        // Arrays are prefixed by a 256 bit length parameter
        index += 32;
        // Read the bytes32 from array memory
        assembly {
            result := mload(add(b, index))
        }
        return result;
    }
    /// @dev Writes a bytes32 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input bytes32 to put into byte array.
    function writeBytes32(
        bytes memory b,
        uint256 index,
        bytes32 input
    )
        internal
        pure
    {
        if (b.length < index + 32) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsThirtyTwoRequired,
                b.length,
                index + 32
            ));
        }
        // Arrays are prefixed by a 256 bit length parameter
        index += 32;
        // Read the bytes32 from array memory
        assembly {
            mstore(add(b, index), input)
        }
    }
    /// @dev Reads a uint256 value from a position in a byte array.
    /// @param b Byte array containing a uint256 value.
    /// @param index Index in byte array of uint256 value.
    /// @return result uint256 value from byte array.
    function readUint256(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (uint256 result)
    {
        result = uint256(readBytes32(b, index));
        return result;
    }
    /// @dev Writes a uint256 into a specific position in a byte array.
    /// @param b Byte array to insert <input> into.
    /// @param index Index in byte array of <input>.
    /// @param input uint256 to put into byte array.
    function writeUint256(
        bytes memory b,
        uint256 index,
        uint256 input
    )
        internal
        pure
    {
        writeBytes32(b, index, bytes32(input));
    }
    /// @dev Reads an unpadded bytes4 value from a position in a byte array.
    /// @param b Byte array containing a bytes4 value.
    /// @param index Index in byte array of bytes4 value.
    /// @return result bytes4 value from byte array.
    function readBytes4(
        bytes memory b,
        uint256 index
    )
        internal
        pure
        returns (bytes4 result)
    {
        if (b.length < index + 4) {
            LibRichErrorsV06.rrevert(LibBytesRichErrorsV06.InvalidByteOperationError(
                LibBytesRichErrorsV06.InvalidByteOperationErrorCodes.LengthGreaterThanOrEqualsFourRequired,
                b.length,
                index + 4
            ));
        }
        // Arrays are prefixed by a 32 byte length field
        index += 32;
        // Read the bytes4 from array memory
        assembly {
            result := mload(add(b, index))
            // Solidity does not require us to clean the trailing bytes.
            // We do it anyway
            result := and(result, 0xFFFFFFFF00000000000000000000000000000000000000000000000000000000)
        }
        return result;
    }
    /// @dev Writes a new length to a byte array.
    ///      Decreasing length will lead to removing the corresponding lower order bytes from the byte array.
    ///      Increasing length may lead to appending adjacent in-memory bytes to the end of the byte array.
    /// @param b Bytes array to write new length to.
    /// @param length New length of byte array.
    function writeLength(bytes memory b, uint256 length)
        internal
        pure
    {
        assembly {
            mstore(b, length)
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibBytesRichErrorsV06 {
    enum InvalidByteOperationErrorCodes {
        FromLessThanOrEqualsToRequired,
        ToLessThanOrEqualsLengthRequired,
        LengthGreaterThanZeroRequired,
        LengthGreaterThanOrEqualsFourRequired,
        LengthGreaterThanOrEqualsTwentyRequired,
        LengthGreaterThanOrEqualsThirtyTwoRequired,
        LengthGreaterThanOrEqualsNestedBytesLengthRequired,
        DestinationLengthGreaterThanOrEqualSourceLengthRequired
    }
    // bytes4(keccak256("InvalidByteOperationError(uint8,uint256,uint256)"))
    bytes4 internal constant INVALID_BYTE_OPERATION_ERROR_SELECTOR =
        0x28006595;
    // solhint-disable func-name-mixedcase
    function InvalidByteOperationError(
        InvalidByteOperationErrorCodes errorCode,
        uint256 offset,
        uint256 required
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            INVALID_BYTE_OPERATION_ERROR_SELECTOR,
            errorCode,
            offset,
            required
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibRichErrorsV06 {
    // bytes4(keccak256("Error(string)"))
    bytes4 internal constant STANDARD_ERROR_SELECTOR = 0x08c379a0;
    // solhint-disable func-name-mixedcase
    /// @dev ABI encode a standard, string revert error payload.
    ///      This is the same payload that would be included by a `revert(string)`
    ///      solidity statement. It has the function signature `Error(string)`.
    /// @param message The error string.
    /// @return The ABI encoded error.
    function StandardError(string memory message)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            STANDARD_ERROR_SELECTOR,
            bytes(message)
        );
    }
    // solhint-enable func-name-mixedcase
    /// @dev Reverts an encoded rich revert reason `errorData`.
    /// @param errorData ABI encoded error data.
    function rrevert(bytes memory errorData)
        internal
        pure
    {
        assembly {
            revert(add(errorData, 0x20), mload(errorData))
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibProxyRichErrors.sol";
library LibBootstrap {
    /// @dev Magic bytes returned by the bootstrapper to indicate success.
    ///      This is `keccack('BOOTSTRAP_SUCCESS')`.
    bytes4 internal constant BOOTSTRAP_SUCCESS = 0xd150751b;
    using LibRichErrorsV06 for bytes;
    /// @dev Perform a delegatecall and ensure it returns the magic bytes.
    /// @param target The call target.
    /// @param data The call data.
    function delegatecallBootstrapFunction(
        address target,
        bytes memory data
    )
        internal
    {
        (bool success, bytes memory resultData) = target.delegatecall(data);
        if (!success ||
            resultData.length != 32 ||
            abi.decode(resultData, (bytes4)) != BOOTSTRAP_SUCCESS)
        {
            LibProxyRichErrors.BootstrapCallFailedError(target, resultData).rrevert();
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibProxyRichErrors {
    // solhint-disable func-name-mixedcase
    function NotImplementedError(bytes4 selector)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("NotImplementedError(bytes4)")),
            selector
        );
    }
    function InvalidBootstrapCallerError(address actual, address expected)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidBootstrapCallerError(address,address)")),
            actual,
            expected
        );
    }
    function InvalidDieCallerError(address actual, address expected)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidDieCallerError(address,address)")),
            actual,
            expected
        );
    }
    function BootstrapCallFailedError(address target, bytes memory resultData)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("BootstrapCallFailedError(address,bytes)")),
            target,
            resultData
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../migrations/LibBootstrap.sol";
import "../storage/LibProxyStorage.sol";
import "./IBootstrap.sol";
/// @dev Detachable `bootstrap()` feature.
contract Bootstrap is
    IBootstrap
{
    // solhint-disable state-visibility,indent
    /// @dev The ZeroEx contract.
    ///      This has to be immutable to persist across delegatecalls.
    address immutable private _deployer;
    /// @dev The implementation address of this contract.
    ///      This has to be immutable to persist across delegatecalls.
    address immutable private _implementation;
    /// @dev The deployer.
    ///      This has to be immutable to persist across delegatecalls.
    address immutable private _bootstrapCaller;
    // solhint-enable state-visibility,indent
    using LibRichErrorsV06 for bytes;
    /// @dev Construct this contract and set the bootstrap migration contract.
    ///      After constructing this contract, `bootstrap()` should be called
    ///      to seed the initial feature set.
    /// @param bootstrapCaller The allowed caller of `bootstrap()`.
    constructor(address bootstrapCaller) public {
        _deployer = msg.sender;
        _implementation = address(this);
        _bootstrapCaller = bootstrapCaller;
    }
    /// @dev Bootstrap the initial feature set of this contract by delegatecalling
    ///      into `target`. Before exiting the `bootstrap()` function will
    ///      deregister itself from the proxy to prevent being called again.
    /// @param target The bootstrapper contract address.
    /// @param callData The call data to execute on `target`.
    function bootstrap(address target, bytes calldata callData) external override {
        // Only the bootstrap caller can call this function.
        if (msg.sender != _bootstrapCaller) {
            LibProxyRichErrors.InvalidBootstrapCallerError(
                msg.sender,
                _bootstrapCaller
            ).rrevert();
        }
        // Deregister.
        LibProxyStorage.getStorage().impls[this.bootstrap.selector] = address(0);
        // Self-destruct.
        Bootstrap(_implementation).die();
        // Call the bootstrapper.
        LibBootstrap.delegatecallBootstrapFunction(target, callData);
    }
    /// @dev Self-destructs this contract.
    ///      Can only be called by the deployer.
    function die() external {
        if (msg.sender != _deployer) {
            LibProxyRichErrors.InvalidDieCallerError(msg.sender, _deployer).rrevert();
        }
        selfdestruct(msg.sender);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./LibStorage.sol";
/// @dev Storage helpers for the proxy contract.
library LibProxyStorage {
    /// @dev Storage bucket for proxy contract.
    struct Storage {
        // Mapping of function selector -> function implementation
        mapping(bytes4 => address) impls;
        // The owner of the proxy contract.
        address owner;
    }
    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.Proxy
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Common storage helpers
library LibStorage {
    /// @dev What to bit-shift a storage ID by to get its slot.
    ///      This gives us a maximum of 2**128 inline fields in each bucket.
    uint256 private constant STORAGE_SLOT_EXP = 128;
    /// @dev Storage IDs for feature storage buckets.
    ///      WARNING: APPEND-ONLY.
    enum StorageId {
        Proxy,
        SimpleFunctionRegistry,
        Ownable,
        TokenSpender,
        TransformERC20
    }
    /// @dev Get the storage slot given a storage ID. We assign unique, well-spaced
    ///     slots to storage bucket variables to ensure they do not overlap.
    ///     See: https://solidity.readthedocs.io/en/v0.6.6/assembly.html#access-to-external-variables-functions-and-libraries
    /// @param storageId An entry in `StorageId`
    /// @return slot The storage slot.
    function getStorageSlot(StorageId storageId)
        internal
        pure
        returns (uint256 slot)
    {
        // This should never overflow with a reasonable `STORAGE_SLOT_EXP`
        // because Solidity will do a range check on `storageId` during the cast.
        return (uint256(storageId) + 1) << STORAGE_SLOT_EXP;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Detachable `bootstrap()` feature.
interface IBootstrap {
    /// @dev Bootstrap the initial feature set of this contract by delegatecalling
    ///      into `target`. Before exiting the `bootstrap()` function will
    ///      deregister itself from the proxy to prevent being called again.
    /// @param target The bootstrapper contract address.
    /// @param callData The call data to execute on `target`.
    function bootstrap(address target, bytes calldata callData) external;
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibCommonRichErrors {
    // solhint-disable func-name-mixedcase
    function OnlyCallableBySelfError(address sender)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyCallableBySelfError(address)")),
            sender
        );
    }
    function IllegalReentrancyError()
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IllegalReentrancyError()"))
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibOwnableRichErrors {
    // solhint-disable func-name-mixedcase
    function OnlyOwnerError(
        address sender,
        address owner
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyOwnerError(address,address)")),
            sender,
            owner
        );
    }
    function TransferOwnerToZeroError()
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("TransferOwnerToZeroError()"))
        );
    }
    function MigrateCallFailedError(address target, bytes memory resultData)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("MigrateCallFailedError(address,bytes)")),
            target,
            resultData
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibSimpleFunctionRegistryRichErrors {
    // solhint-disable func-name-mixedcase
    function NotInRollbackHistoryError(bytes4 selector, address targetImpl)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("NotInRollbackHistoryError(bytes4,address)")),
            selector,
            targetImpl
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibSpenderRichErrors {
    // solhint-disable func-name-mixedcase
    function SpenderERC20TransferFromFailedError(
        address token,
        address owner,
        address to,
        uint256 amount,
        bytes memory errorData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("SpenderERC20TransferFromFailedError(address,address,address,uint256,bytes)")),
            token,
            owner,
            to,
            amount,
            errorData
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibTransformERC20RichErrors {
    // solhint-disable func-name-mixedcase,separate-by-one-line-in-contract
    function InsufficientEthAttachedError(
        uint256 ethAttached,
        uint256 ethNeeded
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InsufficientEthAttachedError(uint256,uint256)")),
            ethAttached,
            ethNeeded
        );
    }
    function IncompleteTransformERC20Error(
        address outputToken,
        uint256 outputTokenAmount,
        uint256 minOutputTokenAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IncompleteTransformERC20Error(address,uint256,uint256)")),
            outputToken,
            outputTokenAmount,
            minOutputTokenAmount
        );
    }
    function NegativeTransformERC20OutputError(
        address outputToken,
        uint256 outputTokenLostAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("NegativeTransformERC20OutputError(address,uint256)")),
            outputToken,
            outputTokenLostAmount
        );
    }
    function TransformerFailedError(
        address transformer,
        bytes memory transformerData,
        bytes memory resultData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("TransformerFailedError(address,bytes,bytes)")),
            transformer,
            transformerData,
            resultData
        );
    }
    // Common Transformer errors ///////////////////////////////////////////////
    function OnlyCallableByDeployerError(
        address caller,
        address deployer
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyCallableByDeployerError(address,address)")),
            caller,
            deployer
        );
    }
    function InvalidExecutionContextError(
        address actualContext,
        address expectedContext
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidExecutionContextError(address,address)")),
            actualContext,
            expectedContext
        );
    }
    enum InvalidTransformDataErrorCode {
        INVALID_TOKENS,
        INVALID_ARRAY_LENGTH
    }
    function InvalidTransformDataError(
        InvalidTransformDataErrorCode errorCode,
        bytes memory transformData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidTransformDataError(uint8,bytes)")),
            errorCode,
            transformData
        );
    }
    // FillQuoteTransformer errors /////////////////////////////////////////////
    function IncompleteFillSellQuoteError(
        address sellToken,
        uint256 soldAmount,
        uint256 sellAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IncompleteFillSellQuoteError(address,uint256,uint256)")),
            sellToken,
            soldAmount,
            sellAmount
        );
    }
    function IncompleteFillBuyQuoteError(
        address buyToken,
        uint256 boughtAmount,
        uint256 buyAmount
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IncompleteFillBuyQuoteError(address,uint256,uint256)")),
            buyToken,
            boughtAmount,
            buyAmount
        );
    }
    function InsufficientTakerTokenError(
        uint256 tokenBalance,
        uint256 tokensNeeded
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InsufficientTakerTokenError(uint256,uint256)")),
            tokenBalance,
            tokensNeeded
        );
    }
    function InsufficientProtocolFeeError(
        uint256 ethBalance,
        uint256 ethNeeded
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InsufficientProtocolFeeError(uint256,uint256)")),
            ethBalance,
            ethNeeded
        );
    }
    function InvalidERC20AssetDataError(
        bytes memory assetData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidERC20AssetDataError(bytes)")),
            assetData
        );
    }
    function InvalidTakerFeeTokenError(
        address token
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("InvalidTakerFeeTokenError(address)")),
            token
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibWalletRichErrors {
    // solhint-disable func-name-mixedcase
    function WalletExecuteCallFailedError(
        address wallet,
        address callTarget,
        bytes memory callData,
        uint256 callValue,
        bytes memory errorData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("WalletExecuteCallFailedError(address,address,bytes,uint256,bytes)")),
            wallet,
            callTarget,
            callData,
            callValue,
            errorData
        );
    }
    function WalletExecuteDelegateCallFailedError(
        address wallet,
        address callTarget,
        bytes memory callData,
        bytes memory errorData
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("WalletExecuteDelegateCallFailedError(address,address,bytes,bytes)")),
            wallet,
            callTarget,
            callData,
            errorData
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/AuthorizableV06.sol";
import "../errors/LibSpenderRichErrors.sol";
import "./IAllowanceTarget.sol";
/// @dev The allowance target for the TokenSpender feature.
contract AllowanceTarget is
    IAllowanceTarget,
    AuthorizableV06
{
    // solhint-disable no-unused-vars,indent,no-empty-blocks
    using LibRichErrorsV06 for bytes;
    /// @dev Execute an arbitrary call. Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @return resultData The data returned by the call.
    function executeCall(
        address payable target,
        bytes calldata callData
    )
        external
        override
        onlyAuthorized
        returns (bytes memory resultData)
    {
        bool success;
        (success, resultData) = target.call(callData);
        if (!success) {
            resultData.rrevert();
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./interfaces/IAuthorizableV06.sol";
import "./errors/LibRichErrorsV06.sol";
import "./errors/LibAuthorizableRichErrorsV06.sol";
import "./OwnableV06.sol";
// solhint-disable no-empty-blocks
contract AuthorizableV06 is
    OwnableV06,
    IAuthorizableV06
{
    /// @dev Only authorized addresses can invoke functions with this modifier.
    modifier onlyAuthorized {
        _assertSenderIsAuthorized();
        _;
    }
    // @dev Whether an address is authorized to call privileged functions.
    // @param 0 Address to query.
    // @return 0 Whether the address is authorized.
    mapping (address => bool) public override authorized;
    // @dev Whether an address is authorized to call privileged functions.
    // @param 0 Index of authorized address.
    // @return 0 Authorized address.
    address[] public override authorities;
    /// @dev Initializes the `owner` address.
    constructor()
        public
        OwnableV06()
    {}
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external
        override
        onlyOwner
    {
        _addAuthorizedAddress(target);
    }
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external
        override
        onlyOwner
    {
        if (!authorized[target]) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.TargetNotAuthorizedError(target));
        }
        for (uint256 i = 0; i < authorities.length; i++) {
            if (authorities[i] == target) {
                _removeAuthorizedAddressAtIndex(target, i);
                break;
            }
        }
    }
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external
        override
        onlyOwner
    {
        _removeAuthorizedAddressAtIndex(target, index);
    }
    /// @dev Gets all authorized addresses.
    /// @return Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        override
        view
        returns (address[] memory)
    {
        return authorities;
    }
    /// @dev Reverts if msg.sender is not authorized.
    function _assertSenderIsAuthorized()
        internal
        view
    {
        if (!authorized[msg.sender]) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.SenderNotAuthorizedError(msg.sender));
        }
    }
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function _addAuthorizedAddress(address target)
        internal
    {
        // Ensure that the target is not the zero address.
        if (target == address(0)) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.ZeroCantBeAuthorizedError());
        }
        // Ensure that the target is not already authorized.
        if (authorized[target]) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.TargetAlreadyAuthorizedError(target));
        }
        authorized[target] = true;
        authorities.push(target);
        emit AuthorizedAddressAdded(target, msg.sender);
    }
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function _removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        internal
    {
        if (!authorized[target]) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.TargetNotAuthorizedError(target));
        }
        if (index >= authorities.length) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.IndexOutOfBoundsError(
                index,
                authorities.length
            ));
        }
        if (authorities[index] != target) {
            LibRichErrorsV06.rrevert(LibAuthorizableRichErrorsV06.AuthorizedAddressMismatchError(
                authorities[index],
                target
            ));
        }
        delete authorized[target];
        authorities[index] = authorities[authorities.length - 1];
        authorities.pop();
        emit AuthorizedAddressRemoved(target, msg.sender);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./IOwnableV06.sol";
interface IAuthorizableV06 is
    IOwnableV06
{
    // Event logged when a new address is authorized.
    event AuthorizedAddressAdded(
        address indexed target,
        address indexed caller
    );
    // Event logged when a currently authorized address is unauthorized.
    event AuthorizedAddressRemoved(
        address indexed target,
        address indexed caller
    );
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external;
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external;
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external;
    /// @dev Gets all authorized addresses.
    /// @return authorizedAddresses Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory authorizedAddresses);
    /// @dev Whether an adderss is authorized to call privileged functions.
    /// @param addr Address to query.
    /// @return isAuthorized Whether the address is authorized.
    function authorized(address addr) external view returns (bool isAuthorized);
    /// @dev All addresseses authorized to call privileged functions.
    /// @param idx Index of authorized address.
    /// @return addr Authorized address.
    function authorities(uint256 idx) external view returns (address addr);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
interface IOwnableV06 {
    /// @dev Emitted by Ownable when ownership is transferred.
    /// @param previousOwner The previous owner of the contract.
    /// @param newOwner The new owner of the contract.
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /// @dev Transfers ownership of the contract to a new address.
    /// @param newOwner The address that will become the owner.
    function transferOwnership(address newOwner) external;
    /// @dev The owner of this contract.
    /// @return ownerAddress The owner address.
    function owner() external view returns (address ownerAddress);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibAuthorizableRichErrorsV06 {
    // bytes4(keccak256("AuthorizedAddressMismatchError(address,address)"))
    bytes4 internal constant AUTHORIZED_ADDRESS_MISMATCH_ERROR_SELECTOR =
        0x140a84db;
    // bytes4(keccak256("IndexOutOfBoundsError(uint256,uint256)"))
    bytes4 internal constant INDEX_OUT_OF_BOUNDS_ERROR_SELECTOR =
        0xe9f83771;
    // bytes4(keccak256("SenderNotAuthorizedError(address)"))
    bytes4 internal constant SENDER_NOT_AUTHORIZED_ERROR_SELECTOR =
        0xb65a25b9;
    // bytes4(keccak256("TargetAlreadyAuthorizedError(address)"))
    bytes4 internal constant TARGET_ALREADY_AUTHORIZED_ERROR_SELECTOR =
        0xde16f1a0;
    // bytes4(keccak256("TargetNotAuthorizedError(address)"))
    bytes4 internal constant TARGET_NOT_AUTHORIZED_ERROR_SELECTOR =
        0xeb5108a2;
    // bytes4(keccak256("ZeroCantBeAuthorizedError()"))
    bytes internal constant ZERO_CANT_BE_AUTHORIZED_ERROR_BYTES =
        hex"57654fe4";
    // solhint-disable func-name-mixedcase
    function AuthorizedAddressMismatchError(
        address authorized,
        address target
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            AUTHORIZED_ADDRESS_MISMATCH_ERROR_SELECTOR,
            authorized,
            target
        );
    }
    function IndexOutOfBoundsError(
        uint256 index,
        uint256 length
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            INDEX_OUT_OF_BOUNDS_ERROR_SELECTOR,
            index,
            length
        );
    }
    function SenderNotAuthorizedError(address sender)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            SENDER_NOT_AUTHORIZED_ERROR_SELECTOR,
            sender
        );
    }
    function TargetAlreadyAuthorizedError(address target)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            TARGET_ALREADY_AUTHORIZED_ERROR_SELECTOR,
            target
        );
    }
    function TargetNotAuthorizedError(address target)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            TARGET_NOT_AUTHORIZED_ERROR_SELECTOR,
            target
        );
    }
    function ZeroCantBeAuthorizedError()
        internal
        pure
        returns (bytes memory)
    {
        return ZERO_CANT_BE_AUTHORIZED_ERROR_BYTES;
    }
}
/*
  Copyright 2019 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./interfaces/IOwnableV06.sol";
import "./errors/LibRichErrorsV06.sol";
import "./errors/LibOwnableRichErrorsV06.sol";
contract OwnableV06 is
    IOwnableV06
{
    /// @dev The owner of this contract.
    /// @return 0 The owner address.
    address public override owner;
    constructor() public {
        owner = msg.sender;
    }
    modifier onlyOwner() {
        _assertSenderIsOwner();
        _;
    }
    /// @dev Change the owner of this contract.
    /// @param newOwner New owner address.
    function transferOwnership(address newOwner)
        public
        override
        onlyOwner
    {
        if (newOwner == address(0)) {
            LibRichErrorsV06.rrevert(LibOwnableRichErrorsV06.TransferOwnerToZeroError());
        } else {
            owner = newOwner;
            emit OwnershipTransferred(msg.sender, newOwner);
        }
    }
    function _assertSenderIsOwner()
        internal
        view
    {
        if (msg.sender != owner) {
            LibRichErrorsV06.rrevert(LibOwnableRichErrorsV06.OnlyOwnerError(
                msg.sender,
                owner
            ));
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibOwnableRichErrorsV06 {
    // bytes4(keccak256("OnlyOwnerError(address,address)"))
    bytes4 internal constant ONLY_OWNER_ERROR_SELECTOR =
        0x1de45ad1;
    // bytes4(keccak256("TransferOwnerToZeroError()"))
    bytes internal constant TRANSFER_OWNER_TO_ZERO_ERROR_BYTES =
        hex"e69edc3e";
    // solhint-disable func-name-mixedcase
    function OnlyOwnerError(
        address sender,
        address owner
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            ONLY_OWNER_ERROR_SELECTOR,
            sender,
            owner
        );
    }
    function TransferOwnerToZeroError()
        internal
        pure
        returns (bytes memory)
    {
        return TRANSFER_OWNER_TO_ZERO_ERROR_BYTES;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/interfaces/IAuthorizableV06.sol";
/// @dev The allowance target for the TokenSpender feature.
interface IAllowanceTarget is
    IAuthorizableV06
{
    /// @dev Execute an arbitrary call. Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @return resultData The data returned by the call.
    function executeCall(
        address payable target,
        bytes calldata callData
    )
        external
        returns (bytes memory resultData);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/errors/LibOwnableRichErrorsV06.sol";
import "../errors/LibWalletRichErrors.sol";
import "./IFlashWallet.sol";
/// @dev A contract that can execute arbitrary calls from its owner.
contract FlashWallet is
    IFlashWallet
{
    // solhint-disable no-unused-vars,indent,no-empty-blocks
    using LibRichErrorsV06 for bytes;
    // solhint-disable
    /// @dev Store the owner/deployer as an immutable to make this contract stateless.
    address public override immutable owner;
    // solhint-enable
    constructor() public {
        // The deployer is the owner.
        owner = msg.sender;
    }
    /// @dev Allows only the (immutable) owner to call a function.
    modifier onlyOwner() virtual {
        if (msg.sender != owner) {
            LibOwnableRichErrorsV06.OnlyOwnerError(
                msg.sender,
                owner
            ).rrevert();
        }
        _;
    }
    /// @dev Execute an arbitrary call. Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @param value Ether to attach to the call.
    /// @return resultData The data returned by the call.
    function executeCall(
        address payable target,
        bytes calldata callData,
        uint256 value
    )
        external
        payable
        override
        onlyOwner
        returns (bytes memory resultData)
    {
        bool success;
        (success, resultData) = target.call{value: value}(callData);
        if (!success) {
            LibWalletRichErrors
                .WalletExecuteCallFailedError(
                    address(this),
                    target,
                    callData,
                    value,
                    resultData
                )
                .rrevert();
        }
    }
    /// @dev Execute an arbitrary delegatecall, in the context of this puppet.
    ///      Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @return resultData The data returned by the call.
    function executeDelegateCall(
        address payable target,
        bytes calldata callData
    )
        external
        payable
        override
        onlyOwner
        returns (bytes memory resultData)
    {
        bool success;
        (success, resultData) = target.delegatecall(callData);
        if (!success) {
            LibWalletRichErrors
                .WalletExecuteDelegateCallFailedError(
                    address(this),
                    target,
                    callData,
                    resultData
                )
                .rrevert();
        }
    }
    // solhint-disable
    /// @dev Allows this contract to receive ether.
    receive() external override payable {}
    // solhint-enable
    /// @dev Signal support for receiving ERC1155 tokens.
    /// @param interfaceID The interface ID, as per ERC-165 rules.
    /// @return hasSupport `true` if this contract supports an ERC-165 interface.
    function supportsInterface(bytes4 interfaceID)
        external
        pure
        returns (bool hasSupport)
    {
        return  interfaceID == this.supportsInterface.selector ||
                interfaceID == this.onERC1155Received.selector ^ this.onERC1155BatchReceived.selector ||
                interfaceID == this.tokenFallback.selector;
    }
    ///  @dev Allow this contract to receive ERC1155 tokens.
    ///  @return success  `bytes4(keccak256("onERC1155Received(address,address,uint256,uint256,bytes)"))`
    function onERC1155Received(
        address, // operator,
        address, // from,
        uint256, // id,
        uint256, // value,
        bytes calldata //data
    )
        external
        pure
        returns (bytes4 success)
    {
        return this.onERC1155Received.selector;
    }
    ///  @dev Allow this contract to receive ERC1155 tokens.
    ///  @return success  `bytes4(keccak256("onERC1155BatchReceived(address,address,uint256[],uint256[],bytes)"))`
    function onERC1155BatchReceived(
        address, // operator,
        address, // from,
        uint256[] calldata, // ids,
        uint256[] calldata, // values,
        bytes calldata // data
    )
        external
        pure
        returns (bytes4 success)
    {
        return this.onERC1155BatchReceived.selector;
    }
    /// @dev Allows this contract to receive ERC223 tokens.
    function tokenFallback(
        address, // from,
        uint256, // value,
        bytes calldata // value
    )
        external
        pure
    {}
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/interfaces/IOwnableV06.sol";
/// @dev A contract that can execute arbitrary calls from its owner.
interface IFlashWallet {
    /// @dev Execute an arbitrary call. Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @param value Ether to attach to the call.
    /// @return resultData The data returned by the call.
    function executeCall(
        address payable target,
        bytes calldata callData,
        uint256 value
    )
        external
        payable
        returns (bytes memory resultData);
    /// @dev Execute an arbitrary delegatecall, in the context of this puppet.
    ///      Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @return resultData The data returned by the call.
    function executeDelegateCall(
        address payable target,
        bytes calldata callData
    )
        external
        payable
        returns (bytes memory resultData);
    /// @dev Allows the puppet to receive ETH.
    receive() external payable;
    /// @dev Fetch the immutable owner/deployer of this contract.
    /// @return owner_ The immutable owner/deployer/
    function owner() external view returns (address owner_);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/AuthorizableV06.sol";
/// @dev A contract with a `die()` function.
interface IKillable {
    function die() external;
}
/// @dev Deployer contract for ERC20 transformers.
///      Only authorities may call `deploy()` and `kill()`.
contract TransformerDeployer is
    AuthorizableV06
{
    /// @dev Emitted when a contract is deployed via `deploy()`.
    /// @param deployedAddress The address of the deployed contract.
    /// @param nonce The deployment nonce.
    /// @param sender The caller of `deploy()`.
    event Deployed(address deployedAddress, uint256 nonce, address sender);
    /// @dev Emitted when a contract is killed via `kill()`.
    /// @param target The address of the contract being killed..
    /// @param sender The caller of `kill()`.
    event Killed(address target, address sender);
    // @dev The current nonce of this contract.
    uint256 public nonce = 1;
    // @dev Mapping of deployed contract address to deployment nonce.
    mapping (address => uint256) public toDeploymentNonce;
    /// @dev Create this contract and register authorities.
    constructor(address[] memory authorities) public {
        for (uint256 i = 0; i < authorities.length; ++i) {
            _addAuthorizedAddress(authorities[i]);
        }
    }
    /// @dev Deploy a new contract. Only callable by an authority.
    ///      Any attached ETH will also be forwarded.
    function deploy(bytes memory bytecode)
        public
        payable
        onlyAuthorized
        returns (address deployedAddress)
    {
        uint256 deploymentNonce = nonce;
        nonce += 1;
        assembly {
            deployedAddress := create(callvalue(), add(bytecode, 32), mload(bytecode))
        }
        toDeploymentNonce[deployedAddress] = deploymentNonce;
        emit Deployed(deployedAddress, deploymentNonce, msg.sender);
    }
    /// @dev Call `die()` on a contract. Only callable by an authority.
    function kill(IKillable target)
        public
        onlyAuthorized
    {
        target.die();
        emit Killed(address(target), msg.sender);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Basic interface for a feature contract.
interface IFeature {
    // solhint-disable func-name-mixedcase
    /// @dev The name of this feature set.
    function FEATURE_NAME() external view returns (string memory name);
    /// @dev The version of this feature set.
    function FEATURE_VERSION() external view returns (uint256 version);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/interfaces/IOwnableV06.sol";
// solhint-disable no-empty-blocks
/// @dev Owner management and migration features.
interface IOwnable is
    IOwnableV06
{
    /// @dev Emitted when `migrate()` is called.
    /// @param caller The caller of `migrate()`.
    /// @param migrator The migration contract.
    /// @param newOwner The address of the new owner.
    event Migrated(address caller, address migrator, address newOwner);
    /// @dev Execute a migration function in the context of the ZeroEx contract.
    ///      The result of the function being called should be the magic bytes
    ///      0x2c64c5ef (`keccack('MIGRATE_SUCCESS')`). Only callable by the owner.
    ///      The owner will be temporarily set to `address(this)` inside the call.
    ///      Before returning, the owner will be set to `newOwner`.
    /// @param target The migrator contract address.
    /// @param newOwner The address of the new owner.
    /// @param data The call data.
    function migrate(address target, bytes calldata data, address newOwner) external;
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Basic registry management features.
interface ISimpleFunctionRegistry {
    /// @dev A function implementation was updated via `extend()` or `rollback()`.
    /// @param selector The function selector.
    /// @param oldImpl The implementation contract address being replaced.
    /// @param newImpl The replacement implementation contract address.
    event ProxyFunctionUpdated(bytes4 indexed selector, address oldImpl, address newImpl);
    /// @dev Roll back to a prior implementation of a function.
    /// @param selector The function selector.
    /// @param targetImpl The address of an older implementation of the function.
    function rollback(bytes4 selector, address targetImpl) external;
    /// @dev Register or replace a function.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function extend(bytes4 selector, address impl) external;
    /// @dev Retrieve the length of the rollback history for a function.
    /// @param selector The function selector.
    /// @return rollbackLength The number of items in the rollback history for
    ///         the function.
    function getRollbackLength(bytes4 selector)
        external
        view
        returns (uint256 rollbackLength);
    /// @dev Retrieve an entry in the rollback history for a function.
    /// @param selector The function selector.
    /// @param idx The index in the rollback history.
    /// @return impl An implementation address for the function at
    ///         index `idx`.
    function getRollbackEntryAtIndex(bytes4 selector, uint256 idx)
        external
        view
        returns (address impl);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
/// @dev Feature that allows spending token allowances.
interface ITokenSpender {
    /// @dev Transfers ERC20 tokens from `owner` to `to`.
    ///      Only callable from within.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @param to The recipient of the tokens.
    /// @param amount The amount of `token` to transfer.
    function _spendERC20Tokens(
        IERC20TokenV06 token,
        address owner,
        address to,
        uint256 amount
    )
        external;
    /// @dev Gets the maximum amount of an ERC20 token `token` that can be
    ///      pulled from `owner`.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @return amount The amount of tokens that can be pulled.
    function getSpendableERC20BalanceOf(IERC20TokenV06 token, address owner)
        external
        view
        returns (uint256 amount);
    /// @dev Get the address of the allowance target.
    /// @return target The target of token allowances.
    function getAllowanceTarget() external view returns (address target);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
interface IERC20TokenV06 {
    // solhint-disable no-simple-event-func-name
    event Transfer(
        address indexed from,
        address indexed to,
        uint256 value
    );
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
    /// @dev send `value` token to `to` from `msg.sender`
    /// @param to The address of the recipient
    /// @param value The amount of token to be transferred
    /// @return True if transfer was successful
    function transfer(address to, uint256 value)
        external
        returns (bool);
    /// @dev send `value` token to `to` from `from` on the condition it is approved by `from`
    /// @param from The address of the sender
    /// @param to The address of the recipient
    /// @param value The amount of token to be transferred
    /// @return True if transfer was successful
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        returns (bool);
    /// @dev `msg.sender` approves `spender` to spend `value` tokens
    /// @param spender The address of the account able to transfer the tokens
    /// @param value The amount of wei to be approved for transfer
    /// @return Always true if the call has enough gas to complete execution
    function approve(address spender, uint256 value)
        external
        returns (bool);
    /// @dev Query total supply of token
    /// @return Total supply of token
    function totalSupply()
        external
        view
        returns (uint256);
    /// @dev Get the balance of `owner`.
    /// @param owner The address from which the balance will be retrieved
    /// @return Balance of owner
    function balanceOf(address owner)
        external
        view
        returns (uint256);
    /// @dev Get the allowance for `spender` to spend from `owner`.
    /// @param owner The address of the account owning tokens
    /// @param spender The address of the account able to transfer the tokens
    /// @return Amount of remaining tokens allowed to spent
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);
    /// @dev Get the number of decimals this token has.
    function decimals()
        external
        view
        returns (uint8);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "../transformers/IERC20Transformer.sol";
import "../external/IFlashWallet.sol";
/// @dev Feature to composably transform between ERC20 tokens.
interface ITransformERC20 {
    /// @dev Defines a transformation to run in `transformERC20()`.
    struct Transformation {
        // The deployment nonce for the transformer.
        // The address of the transformer contract will be derived from this
        // value.
        uint32 deploymentNonce;
        // Arbitrary data to pass to the transformer.
        bytes data;
    }
    /// @dev Raised upon a successful `transformERC20`.
    /// @param taker The taker (caller) address.
    /// @param inputToken The token being provided by the taker.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the taker.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the taker.
    /// @param outputTokenAmount The amount of `outputToken` received by the taker.
    event TransformedERC20(
        address indexed taker,
        address inputToken,
        address outputToken,
        uint256 inputTokenAmount,
        uint256 outputTokenAmount
    );
    /// @dev Raised when `setTransformerDeployer()` is called.
    /// @param transformerDeployer The new deployer address.
    event TransformerDeployerUpdated(address transformerDeployer);
    /// @dev Replace the allowed deployer for transformers.
    ///      Only callable by the owner.
    /// @param transformerDeployer The address of the trusted deployer for transformers.
    function setTransformerDeployer(address transformerDeployer)
        external;
    /// @dev Deploy a new flash wallet instance and replace the current one with it.
    ///      Useful if we somehow break the current wallet instance.
    ///      Anyone can call this.
    /// @return wallet The new wallet instance.
    function createTransformWallet()
        external
        returns (IFlashWallet wallet);
    /// @dev Executes a series of transformations to convert an ERC20 `inputToken`
    ///      to an ERC20 `outputToken`.
    /// @param inputToken The token being provided by the sender.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the sender.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the sender.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the sender
    ///        must receive for the entire transformation to succeed.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the sender.
    function transformERC20(
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] calldata transformations
    )
        external
        payable
        returns (uint256 outputTokenAmount);
    /// @dev Internal version of `transformERC20()`. Only callable from within.
    /// @param callDataHash Hash of the ingress calldata.
    /// @param taker The taker address.
    /// @param inputToken The token being provided by the taker.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the taker.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the taker.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the taker
    ///        must receive for the entire transformation to succeed.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the taker.
    function _transformERC20(
        bytes32 callDataHash,
        address payable taker,
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] calldata transformations
    )
        external
        payable
        returns (uint256 outputTokenAmount);
    /// @dev Return the current wallet instance that will serve as the execution
    ///      context for transformations.
    /// @return wallet The wallet instance.
    function getTransformWallet()
        external
        view
        returns (IFlashWallet wallet);
    /// @dev Return the allowed deployer for transformers.
    /// @return deployer The transform deployer address.
    function getTransformerDeployer()
        external
        view
        returns (address deployer);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
/// @dev A transformation callback used in `TransformERC20.transformERC20()`.
interface IERC20Transformer {
    /// @dev Called from `TransformERC20.transformERC20()`. This will be
    ///      delegatecalled in the context of the FlashWallet instance being used.
    /// @param callDataHash The hash of the `TransformERC20.transformERC20()` calldata.
    /// @param taker The taker address (caller of `TransformERC20.transformERC20()`).
    /// @param data Arbitrary data to pass to the transformer.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32 callDataHash,
        address payable taker,
        bytes calldata data
    )
        external
        returns (bytes4 success);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../fixins/FixinCommon.sol";
import "../errors/LibOwnableRichErrors.sol";
import "../storage/LibOwnableStorage.sol";
import "../migrations/LibBootstrap.sol";
import "../migrations/LibMigrate.sol";
import "./IFeature.sol";
import "./IOwnable.sol";
import "./SimpleFunctionRegistry.sol";
/// @dev Owner management features.
contract Ownable is
    IFeature,
    IOwnable,
    FixinCommon
{
    // solhint-disable
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "Ownable";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 0, 0);
    /// @dev The deployed address of this contract.
    address immutable private _implementation;
    // solhint-enable
    using LibRichErrorsV06 for bytes;
    constructor() public {
        _implementation = address(this);
    }
    /// @dev Initializes this feature. The intial owner will be set to this (ZeroEx)
    ///      to allow the bootstrappers to call `extend()`. Ownership should be
    ///      transferred to the real owner by the bootstrapper after
    ///      bootstrapping is complete.
    /// @return success Magic bytes if successful.
    function bootstrap() external returns (bytes4 success) {
        // Set the owner to ourselves to allow bootstrappers to call `extend()`.
        LibOwnableStorage.getStorage().owner = address(this);
        // Register feature functions.
        SimpleFunctionRegistry(address(this))._extendSelf(this.transferOwnership.selector, _implementation);
        SimpleFunctionRegistry(address(this))._extendSelf(this.owner.selector, _implementation);
        SimpleFunctionRegistry(address(this))._extendSelf(this.migrate.selector, _implementation);
        return LibBootstrap.BOOTSTRAP_SUCCESS;
    }
    /// @dev Change the owner of this contract.
    ///      Only directly callable by the owner.
    /// @param newOwner New owner address.
    function transferOwnership(address newOwner)
        external
        override
        onlyOwner
    {
        LibOwnableStorage.Storage storage proxyStor = LibOwnableStorage.getStorage();
        if (newOwner == address(0)) {
            LibOwnableRichErrors.TransferOwnerToZeroError().rrevert();
        } else {
            proxyStor.owner = newOwner;
            emit OwnershipTransferred(msg.sender, newOwner);
        }
    }
    /// @dev Execute a migration function in the context of the ZeroEx contract.
    ///      The result of the function being called should be the magic bytes
    ///      0x2c64c5ef (`keccack('MIGRATE_SUCCESS')`). Only callable by the owner.
    ///      Temporarily sets the owner to ourselves so we can perform admin functions.
    ///      Before returning, the owner will be set to `newOwner`.
    /// @param target The migrator contract address.
    /// @param data The call data.
    /// @param newOwner The address of the new owner.
    function migrate(address target, bytes calldata data, address newOwner)
        external
        override
        onlyOwner
    {
        if (newOwner == address(0)) {
            LibOwnableRichErrors.TransferOwnerToZeroError().rrevert();
        }
        LibOwnableStorage.Storage storage stor = LibOwnableStorage.getStorage();
        // The owner will be temporarily set to `address(this)` inside the call.
        stor.owner = address(this);
        // Perform the migration.
        LibMigrate.delegatecallMigrateFunction(target, data);
        // Update the owner.
        stor.owner = newOwner;
        emit Migrated(msg.sender, target, newOwner);
    }
    /// @dev Get the owner of this contract.
    /// @return owner_ The owner of this contract.
    function owner() external override view returns (address owner_) {
        return LibOwnableStorage.getStorage().owner;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibCommonRichErrors.sol";
import "../errors/LibOwnableRichErrors.sol";
import "../features/IOwnable.sol";
/// @dev Common feature utilities.
contract FixinCommon {
    using LibRichErrorsV06 for bytes;
    /// @dev The caller must be this contract.
    modifier onlySelf() virtual {
        if (msg.sender != address(this)) {
            LibCommonRichErrors.OnlyCallableBySelfError(msg.sender).rrevert();
        }
        _;
    }
    /// @dev The caller of this function must be the owner.
    modifier onlyOwner() virtual {
        {
            address owner = IOwnable(address(this)).owner();
            if (msg.sender != owner) {
                LibOwnableRichErrors.OnlyOwnerError(
                    msg.sender,
                    owner
                ).rrevert();
            }
        }
        _;
    }
    /// @dev Encode a feature version as a `uint256`.
    /// @param major The major version number of the feature.
    /// @param minor The minor version number of the feature.
    /// @param revision The revision number of the feature.
    /// @return encodedVersion The encoded version number.
    function _encodeVersion(uint32 major, uint32 minor, uint32 revision)
        internal
        pure
        returns (uint256 encodedVersion)
    {
        return (major << 64) | (minor << 32) | revision;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./LibStorage.sol";
/// @dev Storage helpers for the `Ownable` feature.
library LibOwnableStorage {
    /// @dev Storage bucket for this feature.
    struct Storage {
        // The owner of this contract.
        address owner;
    }
    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.Ownable
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibOwnableRichErrors.sol";
library LibMigrate {
    /// @dev Magic bytes returned by a migrator to indicate success.
    ///      This is `keccack('MIGRATE_SUCCESS')`.
    bytes4 internal constant MIGRATE_SUCCESS = 0x2c64c5ef;
    using LibRichErrorsV06 for bytes;
    /// @dev Perform a delegatecall and ensure it returns the magic bytes.
    /// @param target The call target.
    /// @param data The call data.
    function delegatecallMigrateFunction(
        address target,
        bytes memory data
    )
        internal
    {
        (bool success, bytes memory resultData) = target.delegatecall(data);
        if (!success ||
            resultData.length != 32 ||
            abi.decode(resultData, (bytes4)) != MIGRATE_SUCCESS)
        {
            LibOwnableRichErrors.MigrateCallFailedError(target, resultData).rrevert();
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../fixins/FixinCommon.sol";
import "../storage/LibProxyStorage.sol";
import "../storage/LibSimpleFunctionRegistryStorage.sol";
import "../errors/LibSimpleFunctionRegistryRichErrors.sol";
import "../migrations/LibBootstrap.sol";
import "./IFeature.sol";
import "./ISimpleFunctionRegistry.sol";
/// @dev Basic registry management features.
contract SimpleFunctionRegistry is
    IFeature,
    ISimpleFunctionRegistry,
    FixinCommon
{
    // solhint-disable
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "SimpleFunctionRegistry";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 0, 0);
    /// @dev The deployed address of this contract.
    address private immutable _implementation;
    // solhint-enable
    using LibRichErrorsV06 for bytes;
    constructor() public {
        _implementation = address(this);
    }
    /// @dev Initializes this feature, registering its own functions.
    /// @return success Magic bytes if successful.
    function bootstrap()
        external
        returns (bytes4 success)
    {
        // Register the registration functions (inception vibes).
        _extend(this.extend.selector, _implementation);
        _extend(this._extendSelf.selector, _implementation);
        // Register the rollback function.
        _extend(this.rollback.selector, _implementation);
        // Register getters.
        _extend(this.getRollbackLength.selector, _implementation);
        _extend(this.getRollbackEntryAtIndex.selector, _implementation);
        return LibBootstrap.BOOTSTRAP_SUCCESS;
    }
    /// @dev Roll back to a prior implementation of a function.
    ///      Only directly callable by an authority.
    /// @param selector The function selector.
    /// @param targetImpl The address of an older implementation of the function.
    function rollback(bytes4 selector, address targetImpl)
        external
        override
        onlyOwner
    {
        (
            LibSimpleFunctionRegistryStorage.Storage storage stor,
            LibProxyStorage.Storage storage proxyStor
        ) = _getStorages();
        address currentImpl = proxyStor.impls[selector];
        if (currentImpl == targetImpl) {
            // Do nothing if already at targetImpl.
            return;
        }
        // Walk history backwards until we find the target implementation.
        address[] storage history = stor.implHistory[selector];
        uint256 i = history.length;
        for (; i > 0; --i) {
            address impl = history[i - 1];
            history.pop();
            if (impl == targetImpl) {
                break;
            }
        }
        if (i == 0) {
            LibSimpleFunctionRegistryRichErrors.NotInRollbackHistoryError(
                selector,
                targetImpl
            ).rrevert();
        }
        proxyStor.impls[selector] = targetImpl;
        emit ProxyFunctionUpdated(selector, currentImpl, targetImpl);
    }
    /// @dev Register or replace a function.
    ///      Only directly callable by an authority.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function extend(bytes4 selector, address impl)
        external
        override
        onlyOwner
    {
        _extend(selector, impl);
    }
    /// @dev Register or replace a function.
    ///      Only callable from within.
    ///      This function is only used during the bootstrap process and
    ///      should be deregistered by the deployer after bootstrapping is
    ///      complete.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function _extendSelf(bytes4 selector, address impl)
        external
        onlySelf
    {
        _extend(selector, impl);
    }
    /// @dev Retrieve the length of the rollback history for a function.
    /// @param selector The function selector.
    /// @return rollbackLength The number of items in the rollback history for
    ///         the function.
    function getRollbackLength(bytes4 selector)
        external
        override
        view
        returns (uint256 rollbackLength)
    {
        return LibSimpleFunctionRegistryStorage.getStorage().implHistory[selector].length;
    }
    /// @dev Retrieve an entry in the rollback history for a function.
    /// @param selector The function selector.
    /// @param idx The index in the rollback history.
    /// @return impl An implementation address for the function at
    ///         index `idx`.
    function getRollbackEntryAtIndex(bytes4 selector, uint256 idx)
        external
        override
        view
        returns (address impl)
    {
        return LibSimpleFunctionRegistryStorage.getStorage().implHistory[selector][idx];
    }
    /// @dev Register or replace a function.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function _extend(bytes4 selector, address impl)
        private
    {
        (
            LibSimpleFunctionRegistryStorage.Storage storage stor,
            LibProxyStorage.Storage storage proxyStor
        ) = _getStorages();
        address oldImpl = proxyStor.impls[selector];
        address[] storage history = stor.implHistory[selector];
        history.push(oldImpl);
        proxyStor.impls[selector] = impl;
        emit ProxyFunctionUpdated(selector, oldImpl, impl);
    }
    /// @dev Get the storage buckets for this feature and the proxy.
    /// @return stor Storage bucket for this feature.
    /// @return proxyStor age bucket for the proxy.
    function _getStorages()
        private
        pure
        returns (
            LibSimpleFunctionRegistryStorage.Storage storage stor,
            LibProxyStorage.Storage storage proxyStor
        )
    {
        return (
            LibSimpleFunctionRegistryStorage.getStorage(),
            LibProxyStorage.getStorage()
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./LibStorage.sol";
/// @dev Storage helpers for the `SimpleFunctionRegistry` feature.
library LibSimpleFunctionRegistryStorage {
    /// @dev Storage bucket for this feature.
    struct Storage {
        // Mapping of function selector -> implementation history.
        mapping(bytes4 => address[]) implHistory;
    }
    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.SimpleFunctionRegistry
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "../errors/LibSpenderRichErrors.sol";
import "../fixins/FixinCommon.sol";
import "../migrations/LibMigrate.sol";
import "../external/IAllowanceTarget.sol";
import "../storage/LibTokenSpenderStorage.sol";
import "./ITokenSpender.sol";
import "./IFeature.sol";
import "./ISimpleFunctionRegistry.sol";
/// @dev Feature that allows spending token allowances.
contract TokenSpender is
    IFeature,
    ITokenSpender,
    FixinCommon
{
    // solhint-disable
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "TokenSpender";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 0, 0);
    /// @dev The implementation address of this feature.
    address private immutable _implementation;
    // solhint-enable
    using LibRichErrorsV06 for bytes;
    constructor() public {
        _implementation = address(this);
    }
    /// @dev Initialize and register this feature. Should be delegatecalled
    ///      into during a `Migrate.migrate()`.
    /// @param allowanceTarget An `allowanceTarget` instance, configured to have
    ///        the ZeroeEx contract as an authority.
    /// @return success `MIGRATE_SUCCESS` on success.
    function migrate(IAllowanceTarget allowanceTarget) external returns (bytes4 success) {
        LibTokenSpenderStorage.getStorage().allowanceTarget = allowanceTarget;
        ISimpleFunctionRegistry(address(this))
            .extend(this.getAllowanceTarget.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this._spendERC20Tokens.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.getSpendableERC20BalanceOf.selector, _implementation);
        return LibMigrate.MIGRATE_SUCCESS;
    }
    /// @dev Transfers ERC20 tokens from `owner` to `to`. Only callable from within.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @param to The recipient of the tokens.
    /// @param amount The amount of `token` to transfer.
    function _spendERC20Tokens(
        IERC20TokenV06 token,
        address owner,
        address to,
        uint256 amount
    )
        external
        override
        onlySelf
    {
        IAllowanceTarget spender = LibTokenSpenderStorage.getStorage().allowanceTarget;
        // Have the allowance target execute an ERC20 `transferFrom()`.
        (bool didSucceed, bytes memory resultData) = address(spender).call(
            abi.encodeWithSelector(
                IAllowanceTarget.executeCall.selector,
                address(token),
                abi.encodeWithSelector(
                    IERC20TokenV06.transferFrom.selector,
                    owner,
                    to,
                    amount
                )
            )
        );
        if (didSucceed) {
            resultData = abi.decode(resultData, (bytes));
        }
        if (!didSucceed || !LibERC20TokenV06.isSuccessfulResult(resultData)) {
            LibSpenderRichErrors.SpenderERC20TransferFromFailedError(
                address(token),
                owner,
                to,
                amount,
                resultData
            ).rrevert();
        }
    }
    /// @dev Gets the maximum amount of an ERC20 token `token` that can be
    ///      pulled from `owner` by the token spender.
    /// @param token The token to spend.
    /// @param owner The owner of the tokens.
    /// @return amount The amount of tokens that can be pulled.
    function getSpendableERC20BalanceOf(IERC20TokenV06 token, address owner)
        external
        override
        view
        returns (uint256 amount)
    {
        return LibSafeMathV06.min256(
            token.allowance(owner, address(LibTokenSpenderStorage.getStorage().allowanceTarget)),
            token.balanceOf(owner)
        );
    }
    /// @dev Get the address of the allowance target.
    /// @return target The target of token allowances.
    function getAllowanceTarget()
        external
        override
        view
        returns (address target)
    {
        return address(LibTokenSpenderStorage.getStorage().allowanceTarget);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./errors/LibRichErrorsV06.sol";
import "./errors/LibSafeMathRichErrorsV06.sol";
library LibSafeMathV06 {
    function safeMul(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (a == 0) {
            return 0;
        }
        uint256 c = a * b;
        if (c / a != b) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.MULTIPLICATION_OVERFLOW,
                a,
                b
            ));
        }
        return c;
    }
    function safeDiv(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (b == 0) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.DIVISION_BY_ZERO,
                a,
                b
            ));
        }
        uint256 c = a / b;
        return c;
    }
    function safeSub(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        if (b > a) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.SUBTRACTION_UNDERFLOW,
                a,
                b
            ));
        }
        return a - b;
    }
    function safeAdd(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        uint256 c = a + b;
        if (c < a) {
            LibRichErrorsV06.rrevert(LibSafeMathRichErrorsV06.Uint256BinOpError(
                LibSafeMathRichErrorsV06.BinOpErrorCodes.ADDITION_OVERFLOW,
                a,
                b
            ));
        }
        return c;
    }
    function max256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a >= b ? a : b;
    }
    function min256(uint256 a, uint256 b)
        internal
        pure
        returns (uint256)
    {
        return a < b ? a : b;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibSafeMathRichErrorsV06 {
    // bytes4(keccak256("Uint256BinOpError(uint8,uint256,uint256)"))
    bytes4 internal constant UINT256_BINOP_ERROR_SELECTOR =
        0xe946c1bb;
    // bytes4(keccak256("Uint256DowncastError(uint8,uint256)"))
    bytes4 internal constant UINT256_DOWNCAST_ERROR_SELECTOR =
        0xc996af7b;
    enum BinOpErrorCodes {
        ADDITION_OVERFLOW,
        MULTIPLICATION_OVERFLOW,
        SUBTRACTION_UNDERFLOW,
        DIVISION_BY_ZERO
    }
    enum DowncastErrorCodes {
        VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT32,
        VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT64,
        VALUE_TOO_LARGE_TO_DOWNCAST_TO_UINT96
    }
    // solhint-disable func-name-mixedcase
    function Uint256BinOpError(
        BinOpErrorCodes errorCode,
        uint256 a,
        uint256 b
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            UINT256_BINOP_ERROR_SELECTOR,
            errorCode,
            a,
            b
        );
    }
    function Uint256DowncastError(
        DowncastErrorCodes errorCode,
        uint256 a
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            UINT256_DOWNCAST_ERROR_SELECTOR,
            errorCode,
            a
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "./IERC20TokenV06.sol";
library LibERC20TokenV06 {
    bytes constant private DECIMALS_CALL_DATA = hex"313ce567";
    /// @dev Calls `IERC20TokenV06(token).approve()`.
    ///      Reverts if the result fails `isSuccessfulResult()` or the call reverts.
    /// @param token The address of the token contract.
    /// @param spender The address that receives an allowance.
    /// @param allowance The allowance to set.
    function compatApprove(
        IERC20TokenV06 token,
        address spender,
        uint256 allowance
    )
        internal
    {
        bytes memory callData = abi.encodeWithSelector(
            token.approve.selector,
            spender,
            allowance
        );
        _callWithOptionalBooleanResult(address(token), callData);
    }
    /// @dev Calls `IERC20TokenV06(token).approve()` and sets the allowance to the
    ///      maximum if the current approval is not already >= an amount.
    ///      Reverts if the result fails `isSuccessfulResult()` or the call reverts.
    /// @param token The address of the token contract.
    /// @param spender The address that receives an allowance.
    /// @param amount The minimum allowance needed.
    function approveIfBelow(
        IERC20TokenV06 token,
        address spender,
        uint256 amount
    )
        internal
    {
        if (token.allowance(address(this), spender) < amount) {
            compatApprove(token, spender, uint256(-1));
        }
    }
    /// @dev Calls `IERC20TokenV06(token).transfer()`.
    ///      Reverts if the result fails `isSuccessfulResult()` or the call reverts.
    /// @param token The address of the token contract.
    /// @param to The address that receives the tokens
    /// @param amount Number of tokens to transfer.
    function compatTransfer(
        IERC20TokenV06 token,
        address to,
        uint256 amount
    )
        internal
    {
        bytes memory callData = abi.encodeWithSelector(
            token.transfer.selector,
            to,
            amount
        );
        _callWithOptionalBooleanResult(address(token), callData);
    }
    /// @dev Calls `IERC20TokenV06(token).transferFrom()`.
    ///      Reverts if the result fails `isSuccessfulResult()` or the call reverts.
    /// @param token The address of the token contract.
    /// @param from The owner of the tokens.
    /// @param to The address that receives the tokens
    /// @param amount Number of tokens to transfer.
    function compatTransferFrom(
        IERC20TokenV06 token,
        address from,
        address to,
        uint256 amount
    )
        internal
    {
        bytes memory callData = abi.encodeWithSelector(
            token.transferFrom.selector,
            from,
            to,
            amount
        );
        _callWithOptionalBooleanResult(address(token), callData);
    }
    /// @dev Retrieves the number of decimals for a token.
    ///      Returns `18` if the call reverts.
    /// @param token The address of the token contract.
    /// @return tokenDecimals The number of decimals places for the token.
    function compatDecimals(IERC20TokenV06 token)
        internal
        view
        returns (uint8 tokenDecimals)
    {
        tokenDecimals = 18;
        (bool didSucceed, bytes memory resultData) = address(token).staticcall(DECIMALS_CALL_DATA);
        if (didSucceed && resultData.length == 32) {
            tokenDecimals = uint8(LibBytesV06.readUint256(resultData, 0));
        }
    }
    /// @dev Retrieves the allowance for a token, owner, and spender.
    ///      Returns `0` if the call reverts.
    /// @param token The address of the token contract.
    /// @param owner The owner of the tokens.
    /// @param spender The address the spender.
    /// @return allowance_ The allowance for a token, owner, and spender.
    function compatAllowance(IERC20TokenV06 token, address owner, address spender)
        internal
        view
        returns (uint256 allowance_)
    {
        (bool didSucceed, bytes memory resultData) = address(token).staticcall(
            abi.encodeWithSelector(
                token.allowance.selector,
                owner,
                spender
            )
        );
        if (didSucceed && resultData.length == 32) {
            allowance_ = LibBytesV06.readUint256(resultData, 0);
        }
    }
    /// @dev Retrieves the balance for a token owner.
    ///      Returns `0` if the call reverts.
    /// @param token The address of the token contract.
    /// @param owner The owner of the tokens.
    /// @return balance The token balance of an owner.
    function compatBalanceOf(IERC20TokenV06 token, address owner)
        internal
        view
        returns (uint256 balance)
    {
        (bool didSucceed, bytes memory resultData) = address(token).staticcall(
            abi.encodeWithSelector(
                token.balanceOf.selector,
                owner
            )
        );
        if (didSucceed && resultData.length == 32) {
            balance = LibBytesV06.readUint256(resultData, 0);
        }
    }
    /// @dev Check if the data returned by a non-static call to an ERC20 token
    ///      is a successful result. Supported functions are `transfer()`,
    ///      `transferFrom()`, and `approve()`.
    /// @param resultData The raw data returned by a non-static call to the ERC20 token.
    /// @return isSuccessful Whether the result data indicates success.
    function isSuccessfulResult(bytes memory resultData)
        internal
        pure
        returns (bool isSuccessful)
    {
        if (resultData.length == 0) {
            return true;
        }
        if (resultData.length == 32) {
            uint256 result = LibBytesV06.readUint256(resultData, 0);
            if (result == 1) {
                return true;
            }
        }
    }
    /// @dev Executes a call on address `target` with calldata `callData`
    ///      and asserts that either nothing was returned or a single boolean
    ///      was returned equal to `true`.
    /// @param target The call target.
    /// @param callData The abi-encoded call data.
    function _callWithOptionalBooleanResult(
        address target,
        bytes memory callData
    )
        private
    {
        (bool didSucceed, bytes memory resultData) = target.call(callData);
        if (didSucceed && isSuccessfulResult(resultData)) {
            return;
        }
        LibRichErrorsV06.rrevert(resultData);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./LibStorage.sol";
import "../external/IAllowanceTarget.sol";
/// @dev Storage helpers for the `TokenSpender` feature.
library LibTokenSpenderStorage {
    /// @dev Storage bucket for this feature.
    struct Storage {
        // Allowance target contract.
        IAllowanceTarget allowanceTarget;
    }
    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.TokenSpender
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "../fixins/FixinCommon.sol";
import "../migrations/LibMigrate.sol";
import "../external/IFlashWallet.sol";
import "../external/FlashWallet.sol";
import "../storage/LibTransformERC20Storage.sol";
import "../transformers/IERC20Transformer.sol";
import "../transformers/LibERC20Transformer.sol";
import "./ITransformERC20.sol";
import "./ITokenSpender.sol";
import "./IFeature.sol";
import "./ISimpleFunctionRegistry.sol";
/// @dev Feature to composably transform between ERC20 tokens.
contract TransformERC20 is
    IFeature,
    ITransformERC20,
    FixinCommon
{
    /// @dev Stack vars for `_transformERC20Private()`.
    struct TransformERC20PrivateState {
        IFlashWallet wallet;
        address transformerDeployer;
        uint256 takerOutputTokenBalanceBefore;
        uint256 takerOutputTokenBalanceAfter;
    }
    // solhint-disable
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "TransformERC20";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 0, 0);
    /// @dev The implementation address of this feature.
    address private immutable _implementation;
    // solhint-enable
    using LibSafeMathV06 for uint256;
    using LibRichErrorsV06 for bytes;
    constructor() public {
        _implementation = address(this);
    }
    /// @dev Initialize and register this feature.
    ///      Should be delegatecalled by `Migrate.migrate()`.
    /// @param transformerDeployer The trusted deployer for transformers.
    /// @return success `LibMigrate.SUCCESS` on success.
    function migrate(address transformerDeployer) external returns (bytes4 success) {
        ISimpleFunctionRegistry(address(this))
            .extend(this.getTransformerDeployer.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.createTransformWallet.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.getTransformWallet.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.setTransformerDeployer.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this.transformERC20.selector, _implementation);
        ISimpleFunctionRegistry(address(this))
            .extend(this._transformERC20.selector, _implementation);
        createTransformWallet();
        LibTransformERC20Storage.getStorage().transformerDeployer = transformerDeployer;
        return LibMigrate.MIGRATE_SUCCESS;
    }
    /// @dev Replace the allowed deployer for transformers.
    ///      Only callable by the owner.
    /// @param transformerDeployer The address of the trusted deployer for transformers.
    function setTransformerDeployer(address transformerDeployer)
        external
        override
        onlyOwner
    {
        LibTransformERC20Storage.getStorage().transformerDeployer = transformerDeployer;
        emit TransformerDeployerUpdated(transformerDeployer);
    }
    /// @dev Return the allowed deployer for transformers.
    /// @return deployer The transform deployer address.
    function getTransformerDeployer()
        public
        override
        view
        returns (address deployer)
    {
        return LibTransformERC20Storage.getStorage().transformerDeployer;
    }
    /// @dev Deploy a new wallet instance and replace the current one with it.
    ///      Useful if we somehow break the current wallet instance.
    ///      Anyone can call this.
    /// @return wallet The new wallet instance.
    function createTransformWallet()
        public
        override
        returns (IFlashWallet wallet)
    {
        wallet = new FlashWallet();
        LibTransformERC20Storage.getStorage().wallet = wallet;
    }
    /// @dev Executes a series of transformations to convert an ERC20 `inputToken`
    ///      to an ERC20 `outputToken`.
    /// @param inputToken The token being provided by the sender.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the sender.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the sender.
    ///        If set to `uint256(-1)`, the entire spendable balance of the taker
    ///        will be solt.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the sender
    ///        must receive for the entire transformation to succeed. If set to zero,
    ///        the minimum output token transfer will not be asserted.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the sender.
    function transformERC20(
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] memory transformations
    )
        public
        override
        payable
        returns (uint256 outputTokenAmount)
    {
        return _transformERC20Private(
            keccak256(msg.data),
            msg.sender,
            inputToken,
            outputToken,
            inputTokenAmount,
            minOutputTokenAmount,
            transformations
        );
    }
    /// @dev Internal version of `transformERC20()`. Only callable from within.
    /// @param callDataHash Hash of the ingress calldata.
    /// @param taker The taker address.
    /// @param inputToken The token being provided by the taker.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the taker.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the taker.
    ///        If set to `uint256(-1)`, the entire spendable balance of the taker
    ///        will be solt.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the taker
    ///        must receive for the entire transformation to succeed. If set to zero,
    ///        the minimum output token transfer will not be asserted.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the taker.
    function _transformERC20(
        bytes32 callDataHash,
        address payable taker,
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] memory transformations
    )
        public
        override
        payable
        onlySelf
        returns (uint256 outputTokenAmount)
    {
        return _transformERC20Private(
            callDataHash,
            taker,
            inputToken,
            outputToken,
            inputTokenAmount,
            minOutputTokenAmount,
            transformations
        );
    }
    /// @dev Private version of `transformERC20()`.
    /// @param callDataHash Hash of the ingress calldata.
    /// @param taker The taker address.
    /// @param inputToken The token being provided by the taker.
    ///        If `0xeee...`, ETH is implied and should be provided with the call.`
    /// @param outputToken The token to be acquired by the taker.
    ///        `0xeee...` implies ETH.
    /// @param inputTokenAmount The amount of `inputToken` to take from the taker.
    ///        If set to `uint256(-1)`, the entire spendable balance of the taker
    ///        will be solt.
    /// @param minOutputTokenAmount The minimum amount of `outputToken` the taker
    ///        must receive for the entire transformation to succeed. If set to zero,
    ///        the minimum output token transfer will not be asserted.
    /// @param transformations The transformations to execute on the token balance(s)
    ///        in sequence.
    /// @return outputTokenAmount The amount of `outputToken` received by the taker.
    function _transformERC20Private(
        bytes32 callDataHash,
        address payable taker,
        IERC20TokenV06 inputToken,
        IERC20TokenV06 outputToken,
        uint256 inputTokenAmount,
        uint256 minOutputTokenAmount,
        Transformation[] memory transformations
    )
        private
        returns (uint256 outputTokenAmount)
    {
        // If the input token amount is -1, transform the taker's entire
        // spendable balance.
        if (inputTokenAmount == uint256(-1)) {
            inputTokenAmount = ITokenSpender(address(this))
                .getSpendableERC20BalanceOf(inputToken, taker);
        }
        TransformERC20PrivateState memory state;
        state.wallet = getTransformWallet();
        state.transformerDeployer = getTransformerDeployer();
        // Remember the initial output token balance of the taker.
        state.takerOutputTokenBalanceBefore =
            LibERC20Transformer.getTokenBalanceOf(outputToken, taker);
        // Pull input tokens from the taker to the wallet and transfer attached ETH.
        _transferInputTokensAndAttachedEth(
            inputToken,
            taker,
            address(state.wallet),
            inputTokenAmount
        );
        // Perform transformations.
        for (uint256 i = 0; i < transformations.length; ++i) {
            _executeTransformation(
                state.wallet,
                transformations[i],
                state.transformerDeployer,
                taker,
                callDataHash
            );
        }
        // Compute how much output token has been transferred to the taker.
        state.takerOutputTokenBalanceAfter =
            LibERC20Transformer.getTokenBalanceOf(outputToken, taker);
        if (state.takerOutputTokenBalanceAfter > state.takerOutputTokenBalanceBefore) {
            outputTokenAmount = state.takerOutputTokenBalanceAfter.safeSub(
                state.takerOutputTokenBalanceBefore
            );
        } else if (state.takerOutputTokenBalanceAfter < state.takerOutputTokenBalanceBefore) {
            LibTransformERC20RichErrors.NegativeTransformERC20OutputError(
                address(outputToken),
                state.takerOutputTokenBalanceBefore - state.takerOutputTokenBalanceAfter
            ).rrevert();
        }
        // Ensure enough output token has been sent to the taker.
        if (outputTokenAmount < minOutputTokenAmount) {
            LibTransformERC20RichErrors.IncompleteTransformERC20Error(
                address(outputToken),
                outputTokenAmount,
                minOutputTokenAmount
            ).rrevert();
        }
        // Emit an event.
        emit TransformedERC20(
            taker,
            address(inputToken),
            address(outputToken),
            inputTokenAmount,
            outputTokenAmount
        );
    }
    /// @dev Return the current wallet instance that will serve as the execution
    ///      context for transformations.
    /// @return wallet The wallet instance.
    function getTransformWallet()
        public
        override
        view
        returns (IFlashWallet wallet)
    {
        return LibTransformERC20Storage.getStorage().wallet;
    }
    /// @dev Transfer input tokens from the taker and any attached ETH to `to`
    /// @param inputToken The token to pull from the taker.
    /// @param from The from (taker) address.
    /// @param to The recipient of tokens and ETH.
    /// @param amount Amount of `inputToken` tokens to transfer.
    function _transferInputTokensAndAttachedEth(
        IERC20TokenV06 inputToken,
        address from,
        address payable to,
        uint256 amount
    )
        private
    {
        // Transfer any attached ETH.
        if (msg.value != 0) {
            to.transfer(msg.value);
        }
        // Transfer input tokens.
        if (!LibERC20Transformer.isTokenETH(inputToken)) {
            // Token is not ETH, so pull ERC20 tokens.
            ITokenSpender(address(this))._spendERC20Tokens(
                inputToken,
                from,
                to,
                amount
            );
        } else if (msg.value < amount) {
             // Token is ETH, so the caller must attach enough ETH to the call.
            LibTransformERC20RichErrors.InsufficientEthAttachedError(
                msg.value,
                amount
            ).rrevert();
        }
    }
    /// @dev Executs a transformer in the context of `wallet`.
    /// @param wallet The wallet instance.
    /// @param transformation The transformation.
    /// @param transformerDeployer The address of the transformer deployer.
    /// @param taker The taker address.
    /// @param callDataHash Hash of the calldata.
    function _executeTransformation(
        IFlashWallet wallet,
        Transformation memory transformation,
        address transformerDeployer,
        address payable taker,
        bytes32 callDataHash
    )
        private
    {
        // Derive the transformer address from the deployment nonce.
        address payable transformer = LibERC20Transformer.getDeployedAddress(
            transformerDeployer,
            transformation.deploymentNonce
        );
        // Call `transformer.transform()` as the wallet.
        bytes memory resultData = wallet.executeDelegateCall(
            // The call target.
            transformer,
            // Call data.
            abi.encodeWithSelector(
                IERC20Transformer.transform.selector,
                callDataHash,
                taker,
                transformation.data
            )
        );
        // Ensure the transformer returned the magic bytes.
        if (resultData.length != 32 ||
            abi.decode(resultData, (bytes4)) != LibERC20Transformer.TRANSFORMER_SUCCESS
        ) {
            LibTransformERC20RichErrors.TransformerFailedError(
                transformer,
                transformation.data,
                resultData
            ).rrevert();
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./LibStorage.sol";
import "../external/IFlashWallet.sol";
/// @dev Storage helpers for the `TokenSpender` feature.
library LibTransformERC20Storage {
    /// @dev Storage bucket for this feature.
    struct Storage {
        // The current wallet instance.
        IFlashWallet wallet;
        // The transformer deployer address.
        address transformerDeployer;
    }
    /// @dev Get the storage bucket for this contract.
    function getStorage() internal pure returns (Storage storage stor) {
        uint256 storageSlot = LibStorage.getStorageSlot(
            LibStorage.StorageId.TransformERC20
        );
        // Dip into assembly to change the slot pointed to by the local
        // variable `stor`.
        // See https://solidity.readthedocs.io/en/v0.6.8/assembly.html?highlight=slot#access-to-external-variables-functions-and-libraries
        assembly { stor_slot := storageSlot }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
library LibERC20Transformer {
    using LibERC20TokenV06 for IERC20TokenV06;
    /// @dev ETH pseudo-token address.
    address constant internal ETH_TOKEN_ADDRESS = 0xEeeeeEeeeEeEeeEeEeEeeEEEeeeeEeeeeeeeEEeE;
    /// @dev Return value indicating success in `IERC20Transformer.transform()`.
    ///      This is just `keccak256('TRANSFORMER_SUCCESS')`.
    bytes4 constant internal TRANSFORMER_SUCCESS = 0x13c9929e;
    /// @dev Transfer ERC20 tokens and ETH.
    /// @param token An ERC20 or the ETH pseudo-token address (`ETH_TOKEN_ADDRESS`).
    /// @param to The recipient.
    /// @param amount The transfer amount.
    function transformerTransfer(
        IERC20TokenV06 token,
        address payable to,
        uint256 amount
    )
        internal
    {
        if (isTokenETH(token)) {
            to.transfer(amount);
        } else {
            token.compatTransfer(to, amount);
        }
    }
    /// @dev Check if a token is the ETH pseudo-token.
    /// @param token The token to check.
    /// @return isETH `true` if the token is the ETH pseudo-token.
    function isTokenETH(IERC20TokenV06 token)
        internal
        pure
        returns (bool isETH)
    {
        return address(token) == ETH_TOKEN_ADDRESS;
    }
    /// @dev Check the balance of an ERC20 token or ETH.
    /// @param token An ERC20 or the ETH pseudo-token address (`ETH_TOKEN_ADDRESS`).
    /// @param owner Holder of the tokens.
    /// @return tokenBalance The balance of `owner`.
    function getTokenBalanceOf(IERC20TokenV06 token, address owner)
        internal
        view
        returns (uint256 tokenBalance)
    {
        if (isTokenETH(token)) {
            return owner.balance;
        }
        return token.balanceOf(owner);
    }
    /// @dev RLP-encode a 32-bit or less account nonce.
    /// @param nonce A positive integer in the range 0 <= nonce < 2^32.
    /// @return rlpNonce The RLP encoding.
    function rlpEncodeNonce(uint32 nonce)
        internal
        pure
        returns (bytes memory rlpNonce)
    {
        // See https://github.com/ethereum/wiki/wiki/RLP for RLP encoding rules.
        if (nonce == 0) {
            rlpNonce = new bytes(1);
            rlpNonce[0] = 0x80;
        } else if (nonce < 0x80) {
            rlpNonce = new bytes(1);
            rlpNonce[0] = byte(uint8(nonce));
        } else if (nonce <= 0xFF) {
            rlpNonce = new bytes(2);
            rlpNonce[0] = 0x81;
            rlpNonce[1] = byte(uint8(nonce));
        } else if (nonce <= 0xFFFF) {
            rlpNonce = new bytes(3);
            rlpNonce[0] = 0x82;
            rlpNonce[1] = byte(uint8((nonce & 0xFF00) >> 8));
            rlpNonce[2] = byte(uint8(nonce));
        } else if (nonce <= 0xFFFFFF) {
            rlpNonce = new bytes(4);
            rlpNonce[0] = 0x83;
            rlpNonce[1] = byte(uint8((nonce & 0xFF0000) >> 16));
            rlpNonce[2] = byte(uint8((nonce & 0xFF00) >> 8));
            rlpNonce[3] = byte(uint8(nonce));
        } else {
            rlpNonce = new bytes(5);
            rlpNonce[0] = 0x84;
            rlpNonce[1] = byte(uint8((nonce & 0xFF000000) >> 24));
            rlpNonce[2] = byte(uint8((nonce & 0xFF0000) >> 16));
            rlpNonce[3] = byte(uint8((nonce & 0xFF00) >> 8));
            rlpNonce[4] = byte(uint8(nonce));
        }
    }
    /// @dev Compute the expected deployment address by `deployer` at
    ///      the nonce given by `deploymentNonce`.
    /// @param deployer The address of the deployer.
    /// @param deploymentNonce The nonce that the deployer had when deploying
    ///        a contract.
    /// @return deploymentAddress The deployment address.
    function getDeployedAddress(address deployer, uint32 deploymentNonce)
        internal
        pure
        returns (address payable deploymentAddress)
    {
        // The address of if a deployed contract is the lower 20 bytes of the
        // hash of the RLP-encoded deployer's account address + account nonce.
        // See: https://ethereum.stackexchange.com/questions/760/how-is-the-address-of-an-ethereum-contract-computed
        bytes memory rlpNonce = rlpEncodeNonce(deploymentNonce);
        return address(uint160(uint256(keccak256(abi.encodePacked(
            byte(uint8(0xC0 + 21 + rlpNonce.length)),
            byte(uint8(0x80 + 20)),
            deployer,
            rlpNonce
        )))));
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../ZeroEx.sol";
import "../features/IOwnable.sol";
import "../features/TokenSpender.sol";
import "../features/TransformERC20.sol";
import "../external/AllowanceTarget.sol";
import "./InitialMigration.sol";
/// @dev A contract for deploying and configuring the full ZeroEx contract.
contract FullMigration {
    // solhint-disable no-empty-blocks,indent
    /// @dev Features to add the the proxy contract.
    struct Features {
        SimpleFunctionRegistry registry;
        Ownable ownable;
        TokenSpender tokenSpender;
        TransformERC20 transformERC20;
    }
    /// @dev Parameters needed to initialize features.
    struct MigrateOpts {
        address transformerDeployer;
    }
    /// @dev The allowed caller of `deploy()`.
    address public immutable deployer;
    /// @dev The initial migration contract.
    InitialMigration private _initialMigration;
    /// @dev Instantiate this contract and set the allowed caller of `deploy()`
    ///      to `deployer`.
    /// @param deployer_ The allowed caller of `deploy()`.
    constructor(address payable deployer_)
        public
    {
        deployer = deployer_;
        // Create an initial migration contract with this contract set to the
        // allowed deployer.
        _initialMigration = new InitialMigration(address(this));
    }
    /// @dev Deploy the `ZeroEx` contract with the full feature set,
    ///      transfer ownership to `owner`, then self-destruct.
    /// @param owner The owner of the contract.
    /// @param features Features to add to the proxy.
    /// @return zeroEx The deployed and configured `ZeroEx` contract.
    /// @param migrateOpts Parameters needed to initialize features.
    function deploy(
        address payable owner,
        Features memory features,
        MigrateOpts memory migrateOpts
    )
        public
        returns (ZeroEx zeroEx)
    {
        require(msg.sender == deployer, "FullMigration/INVALID_SENDER");
        // Perform the initial migration with the owner set to this contract.
        zeroEx = _initialMigration.deploy(
            address(uint160(address(this))),
            InitialMigration.BootstrapFeatures({
                registry: features.registry,
                ownable: features.ownable
            })
        );
        // Add features.
        _addFeatures(zeroEx, owner, features, migrateOpts);
        // Transfer ownership to the real owner.
        IOwnable(address(zeroEx)).transferOwnership(owner);
        // Self-destruct.
        this.die(owner);
    }
    /// @dev Destroy this contract. Only callable from ourselves (from `deploy()`).
    /// @param ethRecipient Receiver of any ETH in this contract.
    function die(address payable ethRecipient)
        external
        virtual
    {
        require(msg.sender == address(this), "FullMigration/INVALID_SENDER");
        // This contract should not hold any funds but we send
        // them to the ethRecipient just in case.
        selfdestruct(ethRecipient);
    }
    /// @dev Deploy and register features to the ZeroEx contract.
    /// @param zeroEx The bootstrapped ZeroEx contract.
    /// @param owner The ultimate owner of the ZeroEx contract.
    /// @param features Features to add to the proxy.
    /// @param migrateOpts Parameters needed to initialize features.
    function _addFeatures(
        ZeroEx zeroEx,
        address owner,
        Features memory features,
        MigrateOpts memory migrateOpts
    )
        private
    {
        IOwnable ownable = IOwnable(address(zeroEx));
        // TokenSpender
        {
            // Create the allowance target.
            AllowanceTarget allowanceTarget = new AllowanceTarget();
            // Let the ZeroEx contract use the allowance target.
            allowanceTarget.addAuthorizedAddress(address(zeroEx));
            // Transfer ownership of the allowance target to the (real) owner.
            allowanceTarget.transferOwnership(owner);
            // Register the feature.
            ownable.migrate(
                address(features.tokenSpender),
                abi.encodeWithSelector(
                    TokenSpender.migrate.selector,
                    allowanceTarget
                ),
                address(this)
            );
        }
        // TransformERC20
        {
            // Register the feature.
            ownable.migrate(
                address(features.transformERC20),
                abi.encodeWithSelector(
                    TransformERC20.migrate.selector,
                    migrateOpts.transformerDeployer
                ),
                address(this)
            );
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../ZeroEx.sol";
import "../features/IBootstrap.sol";
import "../features/SimpleFunctionRegistry.sol";
import "../features/Ownable.sol";
import "./LibBootstrap.sol";
/// @dev A contract for deploying and configuring a minimal ZeroEx contract.
contract InitialMigration {
    /// @dev Features to bootstrap into the the proxy contract.
    struct BootstrapFeatures {
        SimpleFunctionRegistry registry;
        Ownable ownable;
    }
    /// @dev The allowed caller of `deploy()`. In production, this would be
    ///      the governor.
    address public immutable deployer;
    /// @dev The real address of this contract.
    address private immutable _implementation;
    /// @dev Instantiate this contract and set the allowed caller of `deploy()`
    ///      to `deployer_`.
    /// @param deployer_ The allowed caller of `deploy()`.
    constructor(address deployer_) public {
        deployer = deployer_;
        _implementation = address(this);
    }
    /// @dev Deploy the `ZeroEx` contract with the minimum feature set,
    ///      transfers ownership to `owner`, then self-destructs.
    ///      Only callable by `deployer` set in the contstructor.
    /// @param owner The owner of the contract.
    /// @param features Features to bootstrap into the proxy.
    /// @return zeroEx The deployed and configured `ZeroEx` contract.
    function deploy(address payable owner, BootstrapFeatures memory features)
        public
        virtual
        returns (ZeroEx zeroEx)
    {
        // Must be called by the allowed deployer.
        require(msg.sender == deployer, "InitialMigration/INVALID_SENDER");
        // Deploy the ZeroEx contract, setting ourselves as the bootstrapper.
        zeroEx = new ZeroEx();
        // Bootstrap the initial feature set.
        IBootstrap(address(zeroEx)).bootstrap(
            address(this),
            abi.encodeWithSelector(this.bootstrap.selector, owner, features)
        );
        // Self-destruct. This contract should not hold any funds but we send
        // them to the owner just in case.
        this.die(owner);
    }
    /// @dev Sets up the initial state of the `ZeroEx` contract.
    ///      The `ZeroEx` contract will delegatecall into this function.
    /// @param owner The new owner of the ZeroEx contract.
    /// @param features Features to bootstrap into the proxy.
    /// @return success Magic bytes if successful.
    function bootstrap(address owner, BootstrapFeatures memory features)
        public
        virtual
        returns (bytes4 success)
    {
        // Deploy and migrate the initial features.
        // Order matters here.
        // Initialize Registry.
        LibBootstrap.delegatecallBootstrapFunction(
            address(features.registry),
            abi.encodeWithSelector(
                SimpleFunctionRegistry.bootstrap.selector
            )
        );
        // Initialize Ownable.
        LibBootstrap.delegatecallBootstrapFunction(
            address(features.ownable),
            abi.encodeWithSelector(
                Ownable.bootstrap.selector
            )
        );
        // De-register `SimpleFunctionRegistry._extendSelf`.
        SimpleFunctionRegistry(address(this)).rollback(
            SimpleFunctionRegistry._extendSelf.selector,
            address(0)
        );
        // Transfer ownership to the real owner.
        Ownable(address(this)).transferOwnership(owner);
        success = LibBootstrap.BOOTSTRAP_SUCCESS;
    }
    /// @dev Self-destructs this contract. Only callable by this contract.
    /// @param ethRecipient Who to transfer outstanding ETH to.
    function die(address payable ethRecipient) public virtual {
        require(msg.sender == _implementation, "InitialMigration/INVALID_SENDER");
        selfdestruct(ethRecipient);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "./Transformer.sol";
import "./LibERC20Transformer.sol";
/// @dev A transformer that transfers tokens to arbitrary addresses.
contract AffiliateFeeTransformer is
    Transformer
{
    // solhint-disable no-empty-blocks
    using LibRichErrorsV06 for bytes;
    using LibSafeMathV06 for uint256;
    using LibERC20Transformer for IERC20TokenV06;
    /// @dev Information for a single fee.
    struct TokenFee {
        // The token to transfer to `recipient`.
        IERC20TokenV06 token;
        // Amount of each `token` to transfer to `recipient`.
        // If `amount == uint256(-1)`, the entire balance of `token` will be
        // transferred.
        uint256 amount;
        // Recipient of `token`.
        address payable recipient;
    }
    uint256 private constant MAX_UINT256 = uint256(-1);
    /// @dev Create this contract.
    constructor()
        public
        Transformer()
    {}
    /// @dev Transfers tokens to recipients.
    /// @param data ABI-encoded `TokenFee[]`, indicating which tokens to transfer.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32, // callDataHash,
        address payable, // taker,
        bytes calldata data
    )
        external
        override
        returns (bytes4 success)
    {
        TokenFee[] memory fees = abi.decode(data, (TokenFee[]));
        // Transfer tokens to recipients.
        for (uint256 i = 0; i < fees.length; ++i) {
            uint256 amount = fees[i].amount;
            if (amount == MAX_UINT256) {
                amount = LibERC20Transformer.getTokenBalanceOf(fees[i].token, address(this));
            }
            if (amount != 0) {
                fees[i].token.transformerTransfer(fees[i].recipient, amount);
            }
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "./IERC20Transformer.sol";
/// @dev Abstract base class for transformers.
abstract contract Transformer is
    IERC20Transformer
{
    using LibRichErrorsV06 for bytes;
    /// @dev The address of the deployer.
    address public immutable deployer;
    /// @dev The original address of this contract.
    address private immutable _implementation;
    /// @dev Create this contract.
    constructor() public {
        deployer = msg.sender;
        _implementation = address(this);
    }
    /// @dev Destruct this contract. Only callable by the deployer and will not
    ///      succeed in the context of a delegatecall (from another contract).
    /// @param ethRecipient The recipient of ETH held in this contract.
    function die(address payable ethRecipient)
        external
        virtual
    {
        // Only the deployer can call this.
        if (msg.sender != deployer) {
            LibTransformERC20RichErrors
                .OnlyCallableByDeployerError(msg.sender, deployer)
                .rrevert();
        }
        // Must be executing our own context.
        if (address(this) != _implementation) {
            LibTransformERC20RichErrors
                .InvalidExecutionContextError(address(this), _implementation)
                .rrevert();
        }
        selfdestruct(ethRecipient);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibMathV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "../vendor/v3/IExchange.sol";
import "./Transformer.sol";
import "./LibERC20Transformer.sol";
/// @dev A transformer that fills an ERC20 market sell/buy quote.
contract FillQuoteTransformer is
    Transformer
{
    using LibERC20TokenV06 for IERC20TokenV06;
    using LibERC20Transformer for IERC20TokenV06;
    using LibSafeMathV06 for uint256;
    using LibRichErrorsV06 for bytes;
    /// @dev Whether we are performing a market sell or buy.
    enum Side {
        Sell,
        Buy
    }
    /// @dev Transform data to ABI-encode and pass into `transform()`.
    struct TransformData {
        // Whether we aer performing a market sell or buy.
        Side side;
        // The token being sold.
        // This should be an actual token, not the ETH pseudo-token.
        IERC20TokenV06 sellToken;
        // The token being bought.
        // This should be an actual token, not the ETH pseudo-token.
        IERC20TokenV06 buyToken;
        // The orders to fill.
        IExchange.Order[] orders;
        // Signatures for each respective order in `orders`.
        bytes[] signatures;
        // Maximum fill amount for each order. This may be shorter than the
        // number of orders, where missing entries will be treated as `uint256(-1)`.
        // For sells, this will be the maximum sell amount (taker asset).
        // For buys, this will be the maximum buy amount (maker asset).
        uint256[] maxOrderFillAmounts;
        // Amount of `sellToken` to sell or `buyToken` to buy.
        // For sells, this may be `uint256(-1)` to sell the entire balance of
        // `sellToken`.
        uint256 fillAmount;
    }
    /// @dev Results of a call to `_fillOrder()`.
    struct FillOrderResults {
        // The amount of taker tokens sold, according to balance checks.
        uint256 takerTokenSoldAmount;
        // The amount of maker tokens sold, according to balance checks.
        uint256 makerTokenBoughtAmount;
        // The amount of protocol fee paid.
        uint256 protocolFeePaid;
    }
    /// @dev The Exchange ERC20Proxy ID.
    bytes4 private constant ERC20_ASSET_PROXY_ID = 0xf47261b0;
    /// @dev Maximum uint256 value.
    uint256 private constant MAX_UINT256 = uint256(-1);
    /// @dev The Exchange contract.
    IExchange public immutable exchange;
    /// @dev The ERC20Proxy address.
    address public immutable erc20Proxy;
    /// @dev Create this contract.
    /// @param exchange_ The Exchange V3 instance.
    constructor(IExchange exchange_)
        public
        Transformer()
    {
        exchange = exchange_;
        erc20Proxy = exchange_.getAssetProxy(ERC20_ASSET_PROXY_ID);
    }
    /// @dev Sell this contract's entire balance of of `sellToken` in exchange
    ///      for `buyToken` by filling `orders`. Protocol fees should be attached
    ///      to this call. `buyToken` and excess ETH will be transferred back to the caller.
    /// @param data_ ABI-encoded `TransformData`.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32, // callDataHash,
        address payable, // taker,
        bytes calldata data_
    )
        external
        override
        returns (bytes4 success)
    {
        TransformData memory data = abi.decode(data_, (TransformData));
        // Validate data fields.
        if (data.sellToken.isTokenETH() || data.buyToken.isTokenETH()) {
            LibTransformERC20RichErrors.InvalidTransformDataError(
                LibTransformERC20RichErrors.InvalidTransformDataErrorCode.INVALID_TOKENS,
                data_
            ).rrevert();
        }
        if (data.orders.length != data.signatures.length) {
            LibTransformERC20RichErrors.InvalidTransformDataError(
                LibTransformERC20RichErrors.InvalidTransformDataErrorCode.INVALID_ARRAY_LENGTH,
                data_
            ).rrevert();
        }
        if (data.side == Side.Sell && data.fillAmount == MAX_UINT256) {
            // If `sellAmount == -1 then we are selling
            // the entire balance of `sellToken`. This is useful in cases where
            // the exact sell amount is not exactly known in advance, like when
            // unwrapping Chai/cUSDC/cDAI.
            data.fillAmount = data.sellToken.getTokenBalanceOf(address(this));
        }
        // Approve the ERC20 proxy to spend `sellToken`.
        data.sellToken.approveIfBelow(erc20Proxy, data.fillAmount);
        // Fill the orders.
        uint256 singleProtocolFee = exchange.protocolFeeMultiplier().safeMul(tx.gasprice);
        uint256 ethRemaining = address(this).balance;
        uint256 boughtAmount = 0;
        uint256 soldAmount = 0;
        for (uint256 i = 0; i < data.orders.length; ++i) {
            // Check if we've hit our targets.
            if (data.side == Side.Sell) {
                // Market sell check.
                if (soldAmount >= data.fillAmount) {
                    break;
                }
            } else {
                // Market buy check.
                if (boughtAmount >= data.fillAmount) {
                    break;
                }
            }
            // Ensure we have enough ETH to cover the protocol fee.
            if (ethRemaining < singleProtocolFee) {
                LibTransformERC20RichErrors
                    .InsufficientProtocolFeeError(ethRemaining, singleProtocolFee)
                    .rrevert();
            }
            // Fill the order.
            FillOrderResults memory results;
            if (data.side == Side.Sell) {
                // Market sell.
                results = _sellToOrder(
                    data.buyToken,
                    data.sellToken,
                    data.orders[i],
                    data.signatures[i],
                    data.fillAmount.safeSub(soldAmount).min256(
                        data.maxOrderFillAmounts.length > i
                        ? data.maxOrderFillAmounts[i]
                        : MAX_UINT256
                    ),
                    singleProtocolFee
                );
            } else {
                // Market buy.
                results = _buyFromOrder(
                    data.buyToken,
                    data.sellToken,
                    data.orders[i],
                    data.signatures[i],
                    data.fillAmount.safeSub(boughtAmount).min256(
                        data.maxOrderFillAmounts.length > i
                        ? data.maxOrderFillAmounts[i]
                        : MAX_UINT256
                    ),
                    singleProtocolFee
                );
            }
            // Accumulate totals.
            soldAmount = soldAmount.safeAdd(results.takerTokenSoldAmount);
            boughtAmount = boughtAmount.safeAdd(results.makerTokenBoughtAmount);
            ethRemaining = ethRemaining.safeSub(results.protocolFeePaid);
        }
        // Ensure we hit our targets.
        if (data.side == Side.Sell) {
            // Market sell check.
            if (soldAmount < data.fillAmount) {
                LibTransformERC20RichErrors
                    .IncompleteFillSellQuoteError(
                        address(data.sellToken),
                        soldAmount,
                        data.fillAmount
                    ).rrevert();
            }
        } else {
            // Market buy check.
            if (boughtAmount < data.fillAmount) {
                LibTransformERC20RichErrors
                    .IncompleteFillBuyQuoteError(
                        address(data.buyToken),
                        boughtAmount,
                        data.fillAmount
                    ).rrevert();
            }
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
    /// @dev Try to sell up to `sellAmount` from an order.
    /// @param makerToken The maker/buy token.
    /// @param takerToken The taker/sell token.
    /// @param order The order to fill.
    /// @param signature The signature for `order`.
    /// @param sellAmount Amount of taker token to sell.
    /// @param protocolFee The protocol fee needed to fill `order`.
    function _sellToOrder(
        IERC20TokenV06 makerToken,
        IERC20TokenV06 takerToken,
        IExchange.Order memory order,
        bytes memory signature,
        uint256 sellAmount,
        uint256 protocolFee
    )
        private
        returns (FillOrderResults memory results)
    {
        IERC20TokenV06 takerFeeToken =
            _getTokenFromERC20AssetData(order.takerFeeAssetData);
        uint256 takerTokenFillAmount = sellAmount;
        if (order.takerFee != 0) {
            if (takerFeeToken == makerToken) {
                // Taker fee is payable in the maker token, so we need to
                // approve the proxy to spend the maker token.
                // It isn't worth computing the actual taker fee
                // since `approveIfBelow()` will set the allowance to infinite. We
                // just need a reasonable upper bound to avoid unnecessarily re-approving.
                takerFeeToken.approveIfBelow(erc20Proxy, order.takerFee);
            } else if (takerFeeToken == takerToken){
                // Taker fee is payable in the taker token, so we need to
                // reduce the fill amount to cover the fee.
                // takerTokenFillAmount' =
                //   (takerTokenFillAmount * order.takerAssetAmount) /
                //   (order.takerAssetAmount + order.takerFee)
                takerTokenFillAmount = LibMathV06.getPartialAmountCeil(
                    order.takerAssetAmount,
                    order.takerAssetAmount.safeAdd(order.takerFee),
                    sellAmount
                );
            } else {
                //  Only support taker or maker asset denominated taker fees.
                LibTransformERC20RichErrors.InvalidTakerFeeTokenError(
                    address(takerFeeToken)
                ).rrevert();
            }
        }
        // Clamp fill amount to order size.
        takerTokenFillAmount = LibSafeMathV06.min256(
            takerTokenFillAmount,
            order.takerAssetAmount
        );
        // Perform the fill.
        return _fillOrder(
            order,
            signature,
            takerTokenFillAmount,
            protocolFee,
            makerToken,
            takerFeeToken == takerToken
        );
    }
    /// @dev Try to buy up to `buyAmount` from an order.
    /// @param makerToken The maker/buy token.
    /// @param takerToken The taker/sell token.
    /// @param order The order to fill.
    /// @param signature The signature for `order`.
    /// @param buyAmount Amount of maker token to buy.
    /// @param protocolFee The protocol fee needed to fill `order`.
    function _buyFromOrder(
        IERC20TokenV06 makerToken,
        IERC20TokenV06 takerToken,
        IExchange.Order memory order,
        bytes memory signature,
        uint256 buyAmount,
        uint256 protocolFee
    )
        private
        returns (FillOrderResults memory results)
    {
        IERC20TokenV06 takerFeeToken =
            _getTokenFromERC20AssetData(order.takerFeeAssetData);
        // Compute the default taker token fill amount.
        uint256 takerTokenFillAmount = LibMathV06.getPartialAmountCeil(
            buyAmount,
            order.makerAssetAmount,
            order.takerAssetAmount
        );
        if (order.takerFee != 0) {
            if (takerFeeToken == makerToken) {
                // Taker fee is payable in the maker token.
                // Adjust the taker token fill amount to account for maker
                // tokens being lost to the taker fee.
                // takerTokenFillAmount' =
                //  (order.takerAssetAmount * buyAmount) /
                //  (order.makerAssetAmount - order.takerFee)
                takerTokenFillAmount = LibMathV06.getPartialAmountCeil(
                    buyAmount,
                    order.makerAssetAmount.safeSub(order.takerFee),
                    order.takerAssetAmount
                );
                // Approve the proxy to spend the maker token.
                // It isn't worth computing the actual taker fee
                // since `approveIfBelow()` will set the allowance to infinite. We
                // just need a reasonable upper bound to avoid unnecessarily re-approving.
                takerFeeToken.approveIfBelow(erc20Proxy, order.takerFee);
            } else if (takerFeeToken != takerToken) {
                //  Only support taker or maker asset denominated taker fees.
                LibTransformERC20RichErrors.InvalidTakerFeeTokenError(
                    address(takerFeeToken)
                ).rrevert();
            }
        }
        // Clamp to order size.
        takerTokenFillAmount = LibSafeMathV06.min256(
            order.takerAssetAmount,
            takerTokenFillAmount
        );
        // Perform the fill.
        return _fillOrder(
            order,
            signature,
            takerTokenFillAmount,
            protocolFee,
            makerToken,
            takerFeeToken == takerToken
        );
    }
    /// @dev Attempt to fill an order. If the fill reverts, the revert will be
    ///      swallowed and `results` will be zeroed out.
    /// @param order The order to fill.
    /// @param signature The order signature.
    /// @param takerAssetFillAmount How much taker asset to fill.
    /// @param protocolFee The protocol fee needed to fill this order.
    /// @param makerToken The maker token.
    /// @param isTakerFeeInTakerToken Whether the taker fee token is the same as the
    ///        taker token.
    function _fillOrder(
        IExchange.Order memory order,
        bytes memory signature,
        uint256 takerAssetFillAmount,
        uint256 protocolFee,
        IERC20TokenV06 makerToken,
        bool isTakerFeeInTakerToken
    )
        private
        returns (FillOrderResults memory results)
    {
        // Track changes in the maker token balance.
        uint256 initialMakerTokenBalance = makerToken.balanceOf(address(this));
        try
            exchange.fillOrder
                {value: protocolFee}
                (order, takerAssetFillAmount, signature)
            returns (IExchange.FillResults memory fillResults)
        {
            // Update maker quantity based on changes in token balances.
            results.makerTokenBoughtAmount = makerToken.balanceOf(address(this))
                .safeSub(initialMakerTokenBalance);
            // We can trust the other fill result quantities.
            results.protocolFeePaid = fillResults.protocolFeePaid;
            results.takerTokenSoldAmount = fillResults.takerAssetFilledAmount;
            // If the taker fee is payable in the taker asset, include the
            // taker fee in the total amount sold.
            if (isTakerFeeInTakerToken) {
                results.takerTokenSoldAmount =
                    results.takerTokenSoldAmount.safeAdd(fillResults.takerFeePaid);
            }
        } catch (bytes memory) {
            // Swallow failures, leaving all results as zero.
        }
    }
    /// @dev Extract the token from plain ERC20 asset data.
    ///      If the asset-data is empty, a zero token address will be returned.
    /// @param assetData The order asset data.
    function _getTokenFromERC20AssetData(bytes memory assetData)
        private
        pure
        returns (IERC20TokenV06 token)
    {
        if (assetData.length == 0) {
            return IERC20TokenV06(address(0));
        }
        if (assetData.length != 36 ||
            LibBytesV06.readBytes4(assetData, 0) != ERC20_ASSET_PROXY_ID)
        {
            LibTransformERC20RichErrors
                .InvalidERC20AssetDataError(assetData)
                .rrevert();
        }
        return IERC20TokenV06(LibBytesV06.readAddress(assetData, 16));
    }
}
/*
  Copyright 2019 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./LibSafeMathV06.sol";
import "./errors/LibRichErrorsV06.sol";
import "./errors/LibMathRichErrorsV06.sol";
library LibMathV06 {
    using LibSafeMathV06 for uint256;
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    ///      Reverts if rounding error is >= 0.1%
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded down.
    function safeGetPartialAmountFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        if (isRoundingErrorFloor(
                numerator,
                denominator,
                target
        )) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.RoundingError(
                numerator,
                denominator,
                target
            ));
        }
        partialAmount = numerator.safeMul(target).safeDiv(denominator);
        return partialAmount;
    }
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    ///      Reverts if rounding error is >= 0.1%
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded up.
    function safeGetPartialAmountCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        if (isRoundingErrorCeil(
                numerator,
                denominator,
                target
        )) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.RoundingError(
                numerator,
                denominator,
                target
            ));
        }
        // safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
        //       ceil(a / b) = floor((a + b - 1) / b)
        // To implement `ceil(a / b)` using safeDiv.
        partialAmount = numerator.safeMul(target)
            .safeAdd(denominator.safeSub(1))
            .safeDiv(denominator);
        return partialAmount;
    }
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded down.
    function getPartialAmountFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        partialAmount = numerator.safeMul(target).safeDiv(denominator);
        return partialAmount;
    }
    /// @dev Calculates partial value given a numerator and denominator rounded down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to calculate partial of.
    /// @return partialAmount Partial value of target rounded up.
    function getPartialAmountCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (uint256 partialAmount)
    {
        // safeDiv computes `floor(a / b)`. We use the identity (a, b integer):
        //       ceil(a / b) = floor((a + b - 1) / b)
        // To implement `ceil(a / b)` using safeDiv.
        partialAmount = numerator.safeMul(target)
            .safeAdd(denominator.safeSub(1))
            .safeDiv(denominator);
        return partialAmount;
    }
    /// @dev Checks if rounding error >= 0.1% when rounding down.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to multiply with numerator/denominator.
    /// @return isError Rounding error is present.
    function isRoundingErrorFloor(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bool isError)
    {
        if (denominator == 0) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.DivisionByZeroError());
        }
        // The absolute rounding error is the difference between the rounded
        // value and the ideal value. The relative rounding error is the
        // absolute rounding error divided by the absolute value of the
        // ideal value. This is undefined when the ideal value is zero.
        //
        // The ideal value is `numerator * target / denominator`.
        // Let's call `numerator * target % denominator` the remainder.
        // The absolute error is `remainder / denominator`.
        //
        // When the ideal value is zero, we require the absolute error to
        // be zero. Fortunately, this is always the case. The ideal value is
        // zero iff `numerator == 0` and/or `target == 0`. In this case the
        // remainder and absolute error are also zero.
        if (target == 0 || numerator == 0) {
            return false;
        }
        // Otherwise, we want the relative rounding error to be strictly
        // less than 0.1%.
        // The relative error is `remainder / (numerator * target)`.
        // We want the relative error less than 1 / 1000:
        //        remainder / (numerator * denominator)  <  1 / 1000
        // or equivalently:
        //        1000 * remainder  <  numerator * target
        // so we have a rounding error iff:
        //        1000 * remainder  >=  numerator * target
        uint256 remainder = mulmod(
            target,
            numerator,
            denominator
        );
        isError = remainder.safeMul(1000) >= numerator.safeMul(target);
        return isError;
    }
    /// @dev Checks if rounding error >= 0.1% when rounding up.
    /// @param numerator Numerator.
    /// @param denominator Denominator.
    /// @param target Value to multiply with numerator/denominator.
    /// @return isError Rounding error is present.
    function isRoundingErrorCeil(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bool isError)
    {
        if (denominator == 0) {
            LibRichErrorsV06.rrevert(LibMathRichErrorsV06.DivisionByZeroError());
        }
        // See the comments in `isRoundingError`.
        if (target == 0 || numerator == 0) {
            // When either is zero, the ideal value and rounded value are zero
            // and there is no rounding error. (Although the relative error
            // is undefined.)
            return false;
        }
        // Compute remainder as before
        uint256 remainder = mulmod(
            target,
            numerator,
            denominator
        );
        remainder = denominator.safeSub(remainder) % denominator;
        isError = remainder.safeMul(1000) >= numerator.safeMul(target);
        return isError;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibMathRichErrorsV06 {
    // bytes4(keccak256("DivisionByZeroError()"))
    bytes internal constant DIVISION_BY_ZERO_ERROR =
        hex"a791837c";
    // bytes4(keccak256("RoundingError(uint256,uint256,uint256)"))
    bytes4 internal constant ROUNDING_ERROR_SELECTOR =
        0x339f3de2;
    // solhint-disable func-name-mixedcase
    function DivisionByZeroError()
        internal
        pure
        returns (bytes memory)
    {
        return DIVISION_BY_ZERO_ERROR;
    }
    function RoundingError(
        uint256 numerator,
        uint256 denominator,
        uint256 target
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            ROUNDING_ERROR_SELECTOR,
            numerator,
            denominator,
            target
        );
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Interface to the V3 Exchange.
interface IExchange {
    /// @dev V3 Order structure.
    struct Order {
        // Address that created the order.
        address makerAddress;
        // Address that is allowed to fill the order.
        // If set to 0, any address is allowed to fill the order.
        address takerAddress;
        // Address that will recieve fees when order is filled.
        address feeRecipientAddress;
        // Address that is allowed to call Exchange contract methods that affect this order.
        // If set to 0, any address is allowed to call these methods.
        address senderAddress;
        // Amount of makerAsset being offered by maker. Must be greater than 0.
        uint256 makerAssetAmount;
        // Amount of takerAsset being bid on by maker. Must be greater than 0.
        uint256 takerAssetAmount;
        // Fee paid to feeRecipient by maker when order is filled.
        uint256 makerFee;
        // Fee paid to feeRecipient by taker when order is filled.
        uint256 takerFee;
        // Timestamp in seconds at which order expires.
        uint256 expirationTimeSeconds;
        // Arbitrary number to facilitate uniqueness of the order's hash.
        uint256 salt;
        // Encoded data that can be decoded by a specified proxy contract when transferring makerAsset.
        // The leading bytes4 references the id of the asset proxy.
        bytes makerAssetData;
        // Encoded data that can be decoded by a specified proxy contract when transferring takerAsset.
        // The leading bytes4 references the id of the asset proxy.
        bytes takerAssetData;
        // Encoded data that can be decoded by a specified proxy contract when transferring makerFeeAsset.
        // The leading bytes4 references the id of the asset proxy.
        bytes makerFeeAssetData;
        // Encoded data that can be decoded by a specified proxy contract when transferring takerFeeAsset.
        // The leading bytes4 references the id of the asset proxy.
        bytes takerFeeAssetData;
    }
    /// @dev V3 `fillOrder()` results.`
    struct FillResults {
        // Total amount of makerAsset(s) filled.
        uint256 makerAssetFilledAmount;
        // Total amount of takerAsset(s) filled.
        uint256 takerAssetFilledAmount;
        // Total amount of fees paid by maker(s) to feeRecipient(s).
        uint256 makerFeePaid;
        // Total amount of fees paid by taker to feeRecipients(s).
        uint256 takerFeePaid;
        // Total amount of fees paid by taker to the staking contract.
        uint256 protocolFeePaid;
    }
    /// @dev Fills the input order.
    /// @param order Order struct containing order specifications.
    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
    /// @param signature Proof that order has been created by maker.
    /// @return fillResults Amounts filled and fees paid by maker and taker.
    function fillOrder(
        Order calldata order,
        uint256 takerAssetFillAmount,
        bytes calldata signature
    )
        external
        payable
        returns (FillResults memory fillResults);
    /// @dev Returns the protocolFeeMultiplier
    /// @return multiplier The multiplier for protocol fees.
    function protocolFeeMultiplier()
        external
        view
        returns (uint256 multiplier);
    /// @dev Gets an asset proxy.
    /// @param assetProxyId Id of the asset proxy.
    /// @return proxyAddress The asset proxy registered to assetProxyId.
    ///         Returns 0x0 if no proxy is registered.
    function getAssetProxy(bytes4 assetProxyId)
        external
        view
        returns (address proxyAddress);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/LibERC20TokenV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "./Transformer.sol";
import "./LibERC20Transformer.sol";
/// @dev A transformer that transfers tokens to the taker.
contract PayTakerTransformer is
    Transformer
{
    // solhint-disable no-empty-blocks
    using LibRichErrorsV06 for bytes;
    using LibSafeMathV06 for uint256;
    using LibERC20Transformer for IERC20TokenV06;
    /// @dev Transform data to ABI-encode and pass into `transform()`.
    struct TransformData {
        // The tokens to transfer to the taker.
        IERC20TokenV06[] tokens;
        // Amount of each token in `tokens` to transfer to the taker.
        // `uint(-1)` will transfer the entire balance.
        uint256[] amounts;
    }
    /// @dev Maximum uint256 value.
    uint256 private constant MAX_UINT256 = uint256(-1);
    /// @dev Create this contract.
    constructor()
        public
        Transformer()
    {}
    /// @dev Forwards tokens to the taker.
    /// @param taker The taker address (caller of `TransformERC20.transformERC20()`).
    /// @param data_ ABI-encoded `TransformData`, indicating which tokens to transfer.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32, // callDataHash,
        address payable taker,
        bytes calldata data_
    )
        external
        override
        returns (bytes4 success)
    {
        TransformData memory data = abi.decode(data_, (TransformData));
        // Transfer tokens directly to the taker.
        for (uint256 i = 0; i < data.tokens.length; ++i) {
            // The `amounts` array can be shorter than the `tokens` array.
            // Missing elements are treated as `uint256(-1)`.
            uint256 amount = data.amounts.length > i ? data.amounts[i] : uint256(-1);
            if (amount == MAX_UINT256) {
                amount = data.tokens[i].getTokenBalanceOf(address(this));
            }
            if (amount != 0) {
                data.tokens[i].transformerTransfer(taker, amount);
            }
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IEtherTokenV06.sol";
import "../errors/LibTransformERC20RichErrors.sol";
import "./Transformer.sol";
import "./LibERC20Transformer.sol";
/// @dev A transformer that wraps or unwraps WETH.
contract WethTransformer is
    Transformer
{
    using LibRichErrorsV06 for bytes;
    using LibSafeMathV06 for uint256;
    using LibERC20Transformer for IERC20TokenV06;
    /// @dev Transform data to ABI-encode and pass into `transform()`.
    struct TransformData {
        // The token to wrap/unwrap. Must be either ETH or WETH.
        IERC20TokenV06 token;
        // Amount of `token` to wrap or unwrap.
        // `uint(-1)` will unwrap the entire balance.
        uint256 amount;
    }
    /// @dev The WETH contract address.
    IEtherTokenV06 public immutable weth;
    /// @dev Maximum uint256 value.
    uint256 private constant MAX_UINT256 = uint256(-1);
    /// @dev Construct the transformer and store the WETH address in an immutable.
    /// @param weth_ The weth token.
    constructor(IEtherTokenV06 weth_)
        public
        Transformer()
    {
        weth = weth_;
    }
    /// @dev Wraps and unwraps WETH.
    /// @param data_ ABI-encoded `TransformData`, indicating which token to wrap/umwrap.
    /// @return success The success bytes (`LibERC20Transformer.TRANSFORMER_SUCCESS`).
    function transform(
        bytes32, // callDataHash,
        address payable, // taker,
        bytes calldata data_
    )
        external
        override
        returns (bytes4 success)
    {
        TransformData memory data = abi.decode(data_, (TransformData));
        if (!data.token.isTokenETH() && data.token != weth) {
            LibTransformERC20RichErrors.InvalidTransformDataError(
                LibTransformERC20RichErrors.InvalidTransformDataErrorCode.INVALID_TOKENS,
                data_
            ).rrevert();
        }
        uint256 amount = data.amount;
        if (amount == MAX_UINT256) {
            amount = data.token.getTokenBalanceOf(address(this));
        }
        if (amount != 0) {
            if (data.token.isTokenETH()) {
                // Wrap ETH.
                weth.deposit{value: amount}();
            } else {
                // Unwrap WETH.
                weth.withdraw(amount);
            }
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./IERC20TokenV06.sol";
interface IEtherTokenV06 is
    IERC20TokenV06
{
    /// @dev Wrap ether.
    function deposit() external payable;
    /// @dev Unwrap ether.
    function withdraw(uint256 amount) external;
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
interface ITestSimpleFunctionRegistryFeature {
    function testFn() external view returns (uint256 id);
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
contract TestCallTarget {
    event CallTargetCalled(
        address context,
        address sender,
        bytes data,
        uint256 value
    );
    bytes4 private constant MAGIC_BYTES = 0x12345678;
    bytes private constant REVERTING_DATA = hex"1337";
    fallback() external payable {
        if (keccak256(msg.data) == keccak256(REVERTING_DATA)) {
            revert("TestCallTarget/REVERT");
        }
        emit CallTargetCalled(
            address(this),
            msg.sender,
            msg.data,
            msg.value
        );
        bytes4 rval = MAGIC_BYTES;
        assembly {
            mstore(0, rval)
            return(0, 32)
        }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
contract TestDelegateCaller {
    function executeDelegateCall(
        address target,
        bytes calldata callData
    )
        external
    {
        (bool success, bytes memory resultData) = target.delegatecall(callData);
        if (!success) {
            assembly { revert(add(resultData, 32), mload(resultData)) }
        }
        assembly { return(add(resultData, 32), mload(resultData)) }
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/LibBytesV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibMathV06.sol";
import "@0x/contracts-utils/contracts/src/v06/LibSafeMathV06.sol";
import "../src/vendor/v3/IExchange.sol";
import "./TestMintableERC20Token.sol";
contract TestFillQuoteTransformerExchange {
    struct FillBehavior {
        // How much of the order is filled, in taker asset amount.
        uint256 filledTakerAssetAmount;
        // Scaling for maker assets minted, in 1e18.
        uint256 makerAssetMintRatio;
    }
    uint256 private constant PROTOCOL_FEE_MULTIPLIER = 1337;
    using LibSafeMathV06 for uint256;
    function fillOrder(
        IExchange.Order calldata order,
        uint256 takerAssetFillAmount,
        bytes calldata signature
    )
        external
        payable
        returns (IExchange.FillResults memory fillResults)
    {
        require(
            signature.length != 0,
            "TestFillQuoteTransformerExchange/INVALID_SIGNATURE"
        );
        // The signature is the ABI-encoded FillBehavior data.
        FillBehavior memory behavior = abi.decode(signature, (FillBehavior));
        uint256 protocolFee = PROTOCOL_FEE_MULTIPLIER * tx.gasprice;
        require(
            msg.value == protocolFee,
            "TestFillQuoteTransformerExchange/INSUFFICIENT_PROTOCOL_FEE"
        );
        // Return excess protocol fee.
        msg.sender.transfer(msg.value - protocolFee);
        // Take taker tokens.
        TestMintableERC20Token takerToken = _getTokenFromAssetData(order.takerAssetData);
        takerAssetFillAmount = LibSafeMathV06.min256(
            order.takerAssetAmount.safeSub(behavior.filledTakerAssetAmount),
            takerAssetFillAmount
        );
        require(
            takerToken.getSpendableAmount(msg.sender, address(this)) >= takerAssetFillAmount,
            "TestFillQuoteTransformerExchange/INSUFFICIENT_TAKER_FUNDS"
        );
        takerToken.transferFrom(msg.sender, order.makerAddress, takerAssetFillAmount);
        // Mint maker tokens.
        uint256 makerAssetFilledAmount = LibMathV06.getPartialAmountFloor(
            takerAssetFillAmount,
            order.takerAssetAmount,
            order.makerAssetAmount
        );
        TestMintableERC20Token makerToken = _getTokenFromAssetData(order.makerAssetData);
        makerToken.mint(
            msg.sender,
            LibMathV06.getPartialAmountFloor(
                behavior.makerAssetMintRatio,
                1e18,
                makerAssetFilledAmount
            )
        );
        // Take taker fee.
        TestMintableERC20Token takerFeeToken = _getTokenFromAssetData(order.takerFeeAssetData);
        uint256 takerFee = LibMathV06.getPartialAmountFloor(
            takerAssetFillAmount,
            order.takerAssetAmount,
            order.takerFee
        );
        require(
            takerFeeToken.getSpendableAmount(msg.sender, address(this)) >= takerFee,
            "TestFillQuoteTransformerExchange/INSUFFICIENT_TAKER_FEE_FUNDS"
        );
        takerFeeToken.transferFrom(msg.sender, order.feeRecipientAddress, takerFee);
        fillResults.makerAssetFilledAmount = makerAssetFilledAmount;
        fillResults.takerAssetFilledAmount = takerAssetFillAmount;
        fillResults.makerFeePaid = uint256(-1);
        fillResults.takerFeePaid = takerFee;
        fillResults.protocolFeePaid = protocolFee;
    }
    function encodeBehaviorData(FillBehavior calldata behavior)
        external
        pure
        returns (bytes memory encoded)
    {
        return abi.encode(behavior);
    }
    function protocolFeeMultiplier()
        external
        pure
        returns (uint256)
    {
        return PROTOCOL_FEE_MULTIPLIER;
    }
    function getAssetProxy(bytes4)
        external
        view
        returns (address)
    {
        return address(this);
    }
    function _getTokenFromAssetData(bytes memory assetData)
        private
        pure
        returns (TestMintableERC20Token token)
    {
        return TestMintableERC20Token(LibBytesV06.readAddress(assetData, 16));
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
contract TestMintableERC20Token {
    mapping(address => uint256) public balanceOf;
    mapping(address => mapping(address => uint256)) public allowance;
    function transfer(address to, uint256 amount)
        external
        virtual
        returns (bool)
    {
        return transferFrom(msg.sender, to, amount);
    }
    function approve(address spender, uint256 amount)
        external
        virtual
        returns (bool)
    {
        allowance[msg.sender][spender] = amount;
        return true;
    }
    function mint(address owner, uint256 amount)
        external
        virtual
    {
        balanceOf[owner] += amount;
    }
    function burn(address owner, uint256 amount)
        external
        virtual
    {
        require(balanceOf[owner] >= amount, "TestMintableERC20Token/INSUFFICIENT_FUNDS");
        balanceOf[owner] -= amount;
    }
    function transferFrom(address from, address to, uint256 amount)
        public
        virtual
        returns (bool)
    {
        if (from != msg.sender) {
            require(
                allowance[from][msg.sender] >= amount,
                "TestMintableERC20Token/INSUFFICIENT_ALLOWANCE"
            );
            allowance[from][msg.sender] -= amount;
        }
        require(balanceOf[from] >= amount, "TestMintableERC20Token/INSUFFICIENT_FUNDS");
        balanceOf[from] -= amount;
        balanceOf[to] += amount;
        return true;
    }
    function getSpendableAmount(address owner, address spender)
        external
        view
        returns (uint256)
    {
        return balanceOf[owner] < allowance[owner][spender]
            ? balanceOf[owner]
            : allowance[owner][spender];
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/transformers/IERC20Transformer.sol";
import "./TestMintableERC20Token.sol";
import "./TestTransformerHost.sol";
contract TestFillQuoteTransformerHost is
    TestTransformerHost
{
    function executeTransform(
        IERC20Transformer transformer,
        TestMintableERC20Token inputToken,
        uint256 inputTokenAmount,
        bytes calldata data
    )
        external
        payable
    {
        if (inputTokenAmount != 0) {
            inputToken.mint(address(this), inputTokenAmount);
        }
        // Have to make this call externally because transformers aren't payable.
        this.rawExecuteTransform(transformer, bytes32(0), msg.sender, data);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "../src/transformers/IERC20Transformer.sol";
import "../src/transformers/LibERC20Transformer.sol";
contract TestTransformerHost {
    using LibERC20Transformer for IERC20TokenV06;
    using LibRichErrorsV06 for bytes;
    function rawExecuteTransform(
        IERC20Transformer transformer,
        bytes32 callDataHash,
        address taker,
        bytes calldata data
    )
        external
    {
        (bool _success, bytes memory resultData) =
            address(transformer).delegatecall(abi.encodeWithSelector(
                transformer.transform.selector,
                callDataHash,
                taker,
                data
            ));
        if (!_success) {
            resultData.rrevert();
        }
        require(
            abi.decode(resultData, (bytes4)) == LibERC20Transformer.TRANSFORMER_SUCCESS,
            "TestTransformerHost/INVALID_TRANSFORMER_RESULT"
        );
    }
    // solhint-disable
    receive() external payable {}
    // solhint-enable
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/ZeroEx.sol";
import "../src/features/IBootstrap.sol";
import "../src/migrations/FullMigration.sol";
contract TestFullMigration is
    FullMigration
{
    address public dieRecipient;
    // solhint-disable-next-line no-empty-blocks
    constructor(address payable deployer) public FullMigration(deployer) {}
    function die(address payable ethRecipient) external override {
        dieRecipient = ethRecipient;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/ZeroEx.sol";
import "../src/features/IBootstrap.sol";
import "../src/migrations/InitialMigration.sol";
contract TestInitialMigration is
    InitialMigration
{
    address public bootstrapFeature;
    address public dieRecipient;
    // solhint-disable-next-line no-empty-blocks
    constructor(address deployer) public InitialMigration(deployer) {}
    function callBootstrap(ZeroEx zeroEx) external {
        IBootstrap(address(zeroEx)).bootstrap(address(this), new bytes(0));
    }
    function bootstrap(address owner, BootstrapFeatures memory features)
        public
        override
        returns (bytes4 success)
    {
        success = InitialMigration.bootstrap(owner, features);
        // Snoop the bootstrap feature contract.
        bootstrapFeature = ZeroEx(address(uint160(address(this))))
            .getFunctionImplementation(IBootstrap.bootstrap.selector);
    }
    function die(address payable ethRecipient) public override {
        dieRecipient = ethRecipient;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/migrations/LibMigrate.sol";
import "../src/features/IOwnable.sol";
contract TestMigrator {
    event TestMigrateCalled(
        bytes callData,
        address owner
    );
    function succeedingMigrate() external returns (bytes4 success) {
        emit TestMigrateCalled(
            msg.data,
            IOwnable(address(this)).owner()
        );
        return LibMigrate.MIGRATE_SUCCESS;
    }
    function failingMigrate() external returns (bytes4 success) {
        emit TestMigrateCalled(
            msg.data,
            IOwnable(address(this)).owner()
        );
        return 0xdeadbeef;
    }
    function revertingMigrate() external pure {
        revert("OOPSIE");
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "../src/transformers/IERC20Transformer.sol";
import "../src/transformers/LibERC20Transformer.sol";
import "./TestMintableERC20Token.sol";
contract TestMintTokenERC20Transformer is
    IERC20Transformer
{
    struct TransformData {
        IERC20TokenV06 inputToken;
        TestMintableERC20Token outputToken;
        uint256 burnAmount;
        uint256 mintAmount;
        uint256 feeAmount;
    }
    event MintTransform(
        address context,
        address caller,
        bytes32 callDataHash,
        address taker,
        bytes data,
        uint256 inputTokenBalance,
        uint256 ethBalance
    );
    function transform(
        bytes32 callDataHash,
        address payable taker,
        bytes calldata data_
    )
        external
        override
        returns (bytes4 success)
    {
        TransformData memory data = abi.decode(data_, (TransformData));
        emit MintTransform(
            address(this),
            msg.sender,
            callDataHash,
            taker,
            data_,
            data.inputToken.balanceOf(address(this)),
            address(this).balance
        );
        // "Burn" input tokens.
        data.inputToken.transfer(address(0), data.burnAmount);
        // Mint output tokens.
        if (LibERC20Transformer.isTokenETH(IERC20TokenV06(address(data.outputToken)))) {
            taker.transfer(data.mintAmount);
        } else {
            data.outputToken.mint(
                taker,
                data.mintAmount
            );
            // Burn fees from output.
            data.outputToken.burn(taker, data.feeAmount);
        }
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/fixins/FixinCommon.sol";
contract TestSimpleFunctionRegistryFeatureImpl1 is
    FixinCommon
{
    function testFn()
        external
        pure
        returns (uint256 id)
    {
        return 1337;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/fixins/FixinCommon.sol";
contract TestSimpleFunctionRegistryFeatureImpl2 is
    FixinCommon
{
    function testFn()
        external
        pure
        returns (uint256 id)
    {
        return 1338;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/features/TokenSpender.sol";
contract TestTokenSpender is
    TokenSpender
{
    modifier onlySelf() override {
        _;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./TestMintableERC20Token.sol";
contract TestTokenSpenderERC20Token is
    TestMintableERC20Token
{
    event TransferFromCalled(
        address sender,
        address from,
        address to,
        uint256 amount
    );
    // `transferFrom()` behavior depends on the value of `amount`.
    uint256 constant private EMPTY_RETURN_AMOUNT = 1337;
    uint256 constant private FALSE_RETURN_AMOUNT = 1338;
    uint256 constant private REVERT_RETURN_AMOUNT = 1339;
    function transferFrom(address from, address to, uint256 amount)
        public
        override
        returns (bool)
    {
        emit TransferFromCalled(msg.sender, from, to, amount);
        if (amount == EMPTY_RETURN_AMOUNT) {
            assembly { return(0, 0) }
        }
        if (amount == FALSE_RETURN_AMOUNT) {
            return false;
        }
        if (amount == REVERT_RETURN_AMOUNT) {
            revert("TestTokenSpenderERC20Token/Revert");
        }
        return true;
    }
    function setBalanceAndAllowanceOf(
        address owner,
        uint256 balance,
        address spender,
        uint256 allowance_
    )
        external
    {
        balanceOf[owner] = balance;
        allowance[owner][spender] = allowance_;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/features/TransformERC20.sol";
contract TestTransformERC20 is
    TransformERC20
{
    // solhint-disable no-empty-blocks
    constructor()
        TransformERC20()
        public
    {}
    modifier onlySelf() override {
        _;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/transformers/Transformer.sol";
import "../src/transformers/LibERC20Transformer.sol";
contract TestTransformerBase is
    Transformer
{
    function transform(
        bytes32,
        address payable,
        bytes calldata
    )
        external
        override
        returns (bytes4 success)
    {
        return LibERC20Transformer.TRANSFORMER_SUCCESS;
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/transformers/LibERC20Transformer.sol";
contract TestTransformerDeployerTransformer {
    address payable public immutable deployer;
    constructor() public payable {
        deployer = msg.sender;
    }
    modifier onlyDeployer() {
        require(msg.sender == deployer, "TestTransformerDeployerTransformer/ONLY_DEPLOYER");
        _;
    }
    function die()
        external
        onlyDeployer
    {
        selfdestruct(deployer);
    }
    function isDeployedByDeployer(uint32 nonce)
        external
        view
        returns (bool)
    {
        return LibERC20Transformer.getDeployedAddress(deployer, nonce) == address(this);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "./TestMintableERC20Token.sol";
contract TestWeth is
    TestMintableERC20Token
{
    function deposit()
        external
        payable
    {
        this.mint(msg.sender, msg.value);
    }
    function withdraw(uint256 amount)
        external
    {
        require(balanceOf[msg.sender] >= amount, "TestWeth/INSUFFICIENT_FUNDS");
        balanceOf[msg.sender] -= amount;
        msg.sender.transfer(amount);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/transformers/IERC20Transformer.sol";
import "./TestMintableERC20Token.sol";
import "./TestTransformerHost.sol";
import "./TestWeth.sol";
contract TestWethTransformerHost is
    TestTransformerHost
{
    // solhint-disable
    TestWeth private immutable _weth;
    // solhint-enable
    constructor(TestWeth weth) public {
        _weth = weth;
    }
    function executeTransform(
        uint256 wethAmount,
        IERC20Transformer transformer,
        bytes calldata data
    )
        external
        payable
    {
        if (wethAmount != 0) {
            _weth.deposit{value: wethAmount}();
        }
        // Have to make this call externally because transformers aren't payable.
        this.rawExecuteTransform(transformer, bytes32(0), msg.sender, data);
    }
}
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "../src/fixins/FixinCommon.sol";
import "../src/ZeroEx.sol";
contract TestZeroExFeature is
    FixinCommon
{
    event PayableFnCalled(uint256 value);
    event NotPayableFnCalled();
    function payableFn()
        external
        payable
    {
        emit PayableFnCalled(msg.value);
    }
    function notPayableFn()
        external
    {
        emit NotPayableFnCalled();
    }
    // solhint-disable no-empty-blocks
    function unimplmentedFn()
        external
    {}
    function internalFn()
        external
        onlySelf
    {}
}

// File: contracts/interfaces/IUniswapV2Pair.sol

pragma solidity >=0.5.0;

interface IUniswapV2Pair {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    function MINIMUM_LIQUIDITY() external pure returns (uint);
    function factory() external view returns (address);
    function token0() external view returns (address);
    function token1() external view returns (address);
    function getReserves() external view returns (uint112 reserve0, uint112 reserve1, uint32 blockTimestampLast);
    function price0CumulativeLast() external view returns (uint);
    function price1CumulativeLast() external view returns (uint);
    function kLast() external view returns (uint);

    function mint(address to) external returns (uint liquidity);
    function burn(address to) external returns (uint amount0, uint amount1);
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external;
    function skim(address to) external;
    function sync() external;

    function initialize(address, address) external;
}

// File: contracts/interfaces/IUniswapV2ERC20.sol

pragma solidity >=0.5.0;

interface IUniswapV2ERC20 {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external pure returns (string memory);
    function symbol() external pure returns (string memory);
    function decimals() external pure returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);

    function DOMAIN_SEPARATOR() external view returns (bytes32);
    function PERMIT_TYPEHASH() external pure returns (bytes32);
    function nonces(address owner) external view returns (uint);

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external;
}

// File: contracts/libraries/SafeMath.sol

pragma solidity =0.5.16;

// a library for performing overflow-safe math, courtesy of DappHub (https://github.com/dapphub/ds-math)

library SafeMath {
    function add(uint x, uint y) internal pure returns (uint z) {
        require((z = x + y) >= x, 'ds-math-add-overflow');
    }

    function sub(uint x, uint y) internal pure returns (uint z) {
        require((z = x - y) <= x, 'ds-math-sub-underflow');
    }

    function mul(uint x, uint y) internal pure returns (uint z) {
        require(y == 0 || (z = x * y) / y == x, 'ds-math-mul-overflow');
    }
}

// File: contracts/UniswapV2ERC20.sol

pragma solidity =0.5.16;



contract UniswapV2ERC20 is IUniswapV2ERC20 {
    using SafeMath for uint;

    string public constant name = 'Uniswap V2';
    string public constant symbol = 'UNI-V2';
    uint8 public constant decimals = 18;
    uint  public totalSupply;
    mapping(address => uint) public balanceOf;
    mapping(address => mapping(address => uint)) public allowance;

    bytes32 public DOMAIN_SEPARATOR;
    // keccak256("Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)");
    bytes32 public constant PERMIT_TYPEHASH = 0x6e71edae12b1b97f4d1f60370fef10105fa2faae0126114a169c64845d6126c9;
    mapping(address => uint) public nonces;

    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    constructor() public {
        uint chainId;
        assembly {
            chainId := chainid
        }
        DOMAIN_SEPARATOR = keccak256(
            abi.encode(
                keccak256('EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)'),
                keccak256(bytes(name)),
                keccak256(bytes('1')),
                chainId,
                address(this)
            )
        );
    }

    function _mint(address to, uint value) internal {
        totalSupply = totalSupply.add(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(address(0), to, value);
    }

    function _burn(address from, uint value) internal {
        balanceOf[from] = balanceOf[from].sub(value);
        totalSupply = totalSupply.sub(value);
        emit Transfer(from, address(0), value);
    }

    function _approve(address owner, address spender, uint value) private {
        allowance[owner][spender] = value;
        emit Approval(owner, spender, value);
    }

    function _transfer(address from, address to, uint value) private {
        balanceOf[from] = balanceOf[from].sub(value);
        balanceOf[to] = balanceOf[to].add(value);
        emit Transfer(from, to, value);
    }

    function approve(address spender, uint value) external returns (bool) {
        _approve(msg.sender, spender, value);
        return true;
    }

    function transfer(address to, uint value) external returns (bool) {
        _transfer(msg.sender, to, value);
        return true;
    }

    function transferFrom(address from, address to, uint value) external returns (bool) {
        if (allowance[from][msg.sender] != uint(-1)) {
            allowance[from][msg.sender] = allowance[from][msg.sender].sub(value);
        }
        _transfer(from, to, value);
        return true;
    }

    function permit(address owner, address spender, uint value, uint deadline, uint8 v, bytes32 r, bytes32 s) external {
        require(deadline >= block.timestamp, 'UniswapV2: EXPIRED');
        bytes32 digest = keccak256(
            abi.encodePacked(
                '\x19\x01',
                DOMAIN_SEPARATOR,
                keccak256(abi.encode(PERMIT_TYPEHASH, owner, spender, value, nonces[owner]++, deadline))
            )
        );
        address recoveredAddress = ecrecover(digest, v, r, s);
        require(recoveredAddress != address(0) && recoveredAddress == owner, 'UniswapV2: INVALID_SIGNATURE');
        _approve(owner, spender, value);
    }
}

// File: contracts/libraries/Math.sol

pragma solidity =0.5.16;

// a library for performing various math operations

library Math {
    function min(uint x, uint y) internal pure returns (uint z) {
        z = x < y ? x : y;
    }

    // babylonian method (https://en.wikipedia.org/wiki/Methods_of_computing_square_roots#Babylonian_method)
    function sqrt(uint y) internal pure returns (uint z) {
        if (y > 3) {
            z = y;
            uint x = y / 2 + 1;
            while (x < z) {
                z = x;
                x = (y / x + x) / 2;
            }
        } else if (y != 0) {
            z = 1;
        }
    }
}

// File: contracts/libraries/UQ112x112.sol

pragma solidity =0.5.16;

// a library for handling binary fixed point numbers (https://en.wikipedia.org/wiki/Q_(number_format))

// range: [0, 2**112 - 1]
// resolution: 1 / 2**112

library UQ112x112 {
    uint224 constant Q112 = 2**112;

    // encode a uint112 as a UQ112x112
    function encode(uint112 y) internal pure returns (uint224 z) {
        z = uint224(y) * Q112; // never overflows
    }

    // divide a UQ112x112 by a uint112, returning a UQ112x112
    function uqdiv(uint224 x, uint112 y) internal pure returns (uint224 z) {
        z = x / uint224(y);
    }
}

// File: contracts/interfaces/IERC20.sol

pragma solidity >=0.5.0;

interface IERC20 {
    event Approval(address indexed owner, address indexed spender, uint value);
    event Transfer(address indexed from, address indexed to, uint value);

    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function decimals() external view returns (uint8);
    function totalSupply() external view returns (uint);
    function balanceOf(address owner) external view returns (uint);
    function allowance(address owner, address spender) external view returns (uint);

    function approve(address spender, uint value) external returns (bool);
    function transfer(address to, uint value) external returns (bool);
    function transferFrom(address from, address to, uint value) external returns (bool);
}

// File: contracts/interfaces/IUniswapV2Factory.sol

pragma solidity >=0.5.0;

interface IUniswapV2Factory {
    event PairCreated(address indexed token0, address indexed token1, address pair, uint);

    function feeTo() external view returns (address);
    function feeToSetter() external view returns (address);

    function getPair(address tokenA, address tokenB) external view returns (address pair);
    function allPairs(uint) external view returns (address pair);
    function allPairsLength() external view returns (uint);

    function createPair(address tokenA, address tokenB) external returns (address pair);

    function setFeeTo(address) external;
    function setFeeToSetter(address) external;
}

// File: contracts/interfaces/IUniswapV2Callee.sol

pragma solidity >=0.5.0;

interface IUniswapV2Callee {
    function uniswapV2Call(address sender, uint amount0, uint amount1, bytes calldata data) external;
}

// File: contracts/UniswapV2Pair.sol

pragma solidity =0.5.16;








contract UniswapV2Pair is IUniswapV2Pair, UniswapV2ERC20 {
    using SafeMath  for uint;
    using UQ112x112 for uint224;

    uint public constant MINIMUM_LIQUIDITY = 10**3;
    bytes4 private constant SELECTOR = bytes4(keccak256(bytes('transfer(address,uint256)')));

    address public factory;
    address public token0;
    address public token1;

    uint112 private reserve0;           // uses single storage slot, accessible via getReserves
    uint112 private reserve1;           // uses single storage slot, accessible via getReserves
    uint32  private blockTimestampLast; // uses single storage slot, accessible via getReserves

    uint public price0CumulativeLast;
    uint public price1CumulativeLast;
    uint public kLast; // reserve0 * reserve1, as of immediately after the most recent liquidity event

    uint private unlocked = 1;
    modifier lock() {
        require(unlocked == 1, 'UniswapV2: LOCKED');
        unlocked = 0;
        _;
        unlocked = 1;
    }

    function getReserves() public view returns (uint112 _reserve0, uint112 _reserve1, uint32 _blockTimestampLast) {
        _reserve0 = reserve0;
        _reserve1 = reserve1;
        _blockTimestampLast = blockTimestampLast;
    }

    function _safeTransfer(address token, address to, uint value) private {
        (bool success, bytes memory data) = token.call(abi.encodeWithSelector(SELECTOR, to, value));
        require(success && (data.length == 0 || abi.decode(data, (bool))), 'UniswapV2: TRANSFER_FAILED');
    }

    event Mint(address indexed sender, uint amount0, uint amount1);
    event Burn(address indexed sender, uint amount0, uint amount1, address indexed to);
    event Swap(
        address indexed sender,
        uint amount0In,
        uint amount1In,
        uint amount0Out,
        uint amount1Out,
        address indexed to
    );
    event Sync(uint112 reserve0, uint112 reserve1);

    constructor() public {
        factory = msg.sender;
    }

    // called once by the factory at time of deployment
    function initialize(address _token0, address _token1) external {
        require(msg.sender == factory, 'UniswapV2: FORBIDDEN'); // sufficient check
        token0 = _token0;
        token1 = _token1;
    }

    // update reserves and, on the first call per block, price accumulators
    function _update(uint balance0, uint balance1, uint112 _reserve0, uint112 _reserve1) private {
        require(balance0 <= uint112(-1) && balance1 <= uint112(-1), 'UniswapV2: OVERFLOW');
        uint32 blockTimestamp = uint32(block.timestamp % 2**32);
        uint32 timeElapsed = blockTimestamp - blockTimestampLast; // overflow is desired
        if (timeElapsed > 0 && _reserve0 != 0 && _reserve1 != 0) {
            // * never overflows, and + overflow is desired
            price0CumulativeLast += uint(UQ112x112.encode(_reserve1).uqdiv(_reserve0)) * timeElapsed;
            price1CumulativeLast += uint(UQ112x112.encode(_reserve0).uqdiv(_reserve1)) * timeElapsed;
        }
        reserve0 = uint112(balance0);
        reserve1 = uint112(balance1);
        blockTimestampLast = blockTimestamp;
        emit Sync(reserve0, reserve1);
    }

    // if fee is on, mint liquidity equivalent to 1/6th of the growth in sqrt(k)
    function _mintFee(uint112 _reserve0, uint112 _reserve1) private returns (bool feeOn) {
        address feeTo = IUniswapV2Factory(factory).feeTo();
        feeOn = feeTo != address(0);
        uint _kLast = kLast; // gas savings
        if (feeOn) {
            if (_kLast != 0) {
                uint rootK = Math.sqrt(uint(_reserve0).mul(_reserve1));
                uint rootKLast = Math.sqrt(_kLast);
                if (rootK > rootKLast) {
                    uint numerator = totalSupply.mul(rootK.sub(rootKLast));
                    uint denominator = rootK.mul(5).add(rootKLast);
                    uint liquidity = numerator / denominator;
                    if (liquidity > 0) _mint(feeTo, liquidity);
                }
            }
        } else if (_kLast != 0) {
            kLast = 0;
        }
    }

    // this low-level function should be called from a contract which performs important safety checks
    function mint(address to) external lock returns (uint liquidity) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        uint balance0 = IERC20(token0).balanceOf(address(this));
        uint balance1 = IERC20(token1).balanceOf(address(this));
        uint amount0 = balance0.sub(_reserve0);
        uint amount1 = balance1.sub(_reserve1);

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        if (_totalSupply == 0) {
            liquidity = Math.sqrt(amount0.mul(amount1)).sub(MINIMUM_LIQUIDITY);
           _mint(address(0), MINIMUM_LIQUIDITY); // permanently lock the first MINIMUM_LIQUIDITY tokens
        } else {
            liquidity = Math.min(amount0.mul(_totalSupply) / _reserve0, amount1.mul(_totalSupply) / _reserve1);
        }
        require(liquidity > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_MINTED');
        _mint(to, liquidity);

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Mint(msg.sender, amount0, amount1);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function burn(address to) external lock returns (uint amount0, uint amount1) {
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        address _token0 = token0;                                // gas savings
        address _token1 = token1;                                // gas savings
        uint balance0 = IERC20(_token0).balanceOf(address(this));
        uint balance1 = IERC20(_token1).balanceOf(address(this));
        uint liquidity = balanceOf[address(this)];

        bool feeOn = _mintFee(_reserve0, _reserve1);
        uint _totalSupply = totalSupply; // gas savings, must be defined here since totalSupply can update in _mintFee
        amount0 = liquidity.mul(balance0) / _totalSupply; // using balances ensures pro-rata distribution
        amount1 = liquidity.mul(balance1) / _totalSupply; // using balances ensures pro-rata distribution
        require(amount0 > 0 && amount1 > 0, 'UniswapV2: INSUFFICIENT_LIQUIDITY_BURNED');
        _burn(address(this), liquidity);
        _safeTransfer(_token0, to, amount0);
        _safeTransfer(_token1, to, amount1);
        balance0 = IERC20(_token0).balanceOf(address(this));
        balance1 = IERC20(_token1).balanceOf(address(this));

        _update(balance0, balance1, _reserve0, _reserve1);
        if (feeOn) kLast = uint(reserve0).mul(reserve1); // reserve0 and reserve1 are up-to-date
        emit Burn(msg.sender, amount0, amount1, to);
    }

    // this low-level function should be called from a contract which performs important safety checks
    function swap(uint amount0Out, uint amount1Out, address to, bytes calldata data) external lock {
        require(amount0Out > 0 || amount1Out > 0, 'UniswapV2: INSUFFICIENT_OUTPUT_AMOUNT');
        (uint112 _reserve0, uint112 _reserve1,) = getReserves(); // gas savings
        require(amount0Out < _reserve0 && amount1Out < _reserve1, 'UniswapV2: INSUFFICIENT_LIQUIDITY');

        uint balance0;
        uint balance1;
        { // scope for _token{0,1}, avoids stack too deep errors
        address _token0 = token0;
        address _token1 = token1;
        require(to != _token0 && to != _token1, 'UniswapV2: INVALID_TO');
        if (amount0Out > 0) _safeTransfer(_token0, to, amount0Out); // optimistically transfer tokens
        if (amount1Out > 0) _safeTransfer(_token1, to, amount1Out); // optimistically transfer tokens
        if (data.length > 0) IUniswapV2Callee(to).uniswapV2Call(msg.sender, amount0Out, amount1Out, data);
        balance0 = IERC20(_token0).balanceOf(address(this));
        balance1 = IERC20(_token1).balanceOf(address(this));
        }
        uint amount0In = balance0 > _reserve0 - amount0Out ? balance0 - (_reserve0 - amount0Out) : 0;
        uint amount1In = balance1 > _reserve1 - amount1Out ? balance1 - (_reserve1 - amount1Out) : 0;
        require(amount0In > 0 || amount1In > 0, 'UniswapV2: INSUFFICIENT_INPUT_AMOUNT');
        { // scope for reserve{0,1}Adjusted, avoids stack too deep errors
        uint balance0Adjusted = balance0.mul(1000).sub(amount0In.mul(3));
        uint balance1Adjusted = balance1.mul(1000).sub(amount1In.mul(3));
        require(balance0Adjusted.mul(balance1Adjusted) >= uint(_reserve0).mul(_reserve1).mul(1000**2), 'UniswapV2: K');
        }

        _update(balance0, balance1, _reserve0, _reserve1);
        emit Swap(msg.sender, amount0In, amount1In, amount0Out, amount1Out, to);
    }

    // force balances to match reserves
    function skim(address to) external lock {
        address _token0 = token0; // gas savings
        address _token1 = token1; // gas savings
        _safeTransfer(_token0, to, IERC20(_token0).balanceOf(address(this)).sub(reserve0));
        _safeTransfer(_token1, to, IERC20(_token1).balanceOf(address(this)).sub(reserve1));
    }

    // force reserves to match balances
    function sync() external lock {
        _update(IERC20(token0).balanceOf(address(this)), IERC20(token1).balanceOf(address(this)), reserve0, reserve1);
    }
}

/**
 *Submitted for verification at Etherscan.io on 2021-04-28
*/

// File: node_modules\@openzeppelin\contracts\utils\EnumerableSet.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Library for managing
 * https://en.wikipedia.org/wiki/Set_(abstract_data_type)[sets] of primitive
 * types.
 *
 * Sets have the following properties:
 *
 * - Elements are added, removed, and checked for existence in constant time
 * (O(1)).
 * - Elements are enumerated in O(n). No guarantees are made on the ordering.
 *
 * ```
 * contract Example {
 *     // Add the library methods
 *     using EnumerableSet for EnumerableSet.AddressSet;
 *
 *     // Declare a set state variable
 *     EnumerableSet.AddressSet private mySet;
 * }
 * ```
 *
 * As of v3.0.0, only sets of type `address` (`AddressSet`) and `uint256`
 * (`UintSet`) are supported.
 */
library EnumerableSet {
    // To implement this library for multiple types with as little code
    // repetition as possible, we write it in terms of a generic Set type with
    // bytes32 values.
    // The Set implementation uses private functions, and user-facing
    // implementations (such as AddressSet) are just wrappers around the
    // underlying Set.
    // This means that we can only create new EnumerableSets for types that fit
    // in bytes32.

    struct Set {
        // Storage of set values
        bytes32[] _values;

        // Position of the value in the `values` array, plus 1 because index 0
        // means a value is not in the set.
        mapping (bytes32 => uint256) _indexes;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function _add(Set storage set, bytes32 value) private returns (bool) {
        if (!_contains(set, value)) {
            set._values.push(value);
            // The value is stored at length-1, but we add 1 to all indexes
            // and use 0 as a sentinel value
            set._indexes[value] = set._values.length;
            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function _remove(Set storage set, bytes32 value) private returns (bool) {
        // We read and store the value's index to prevent multiple reads from the same storage slot
        uint256 valueIndex = set._indexes[value];

        if (valueIndex != 0) { // Equivalent to contains(set, value)
            // To delete an element from the _values array in O(1), we swap the element to delete with the last one in
            // the array, and then remove the last element (sometimes called as 'swap and pop').
            // This modifies the order of the array, as noted in {at}.

            uint256 toDeleteIndex = valueIndex - 1;
            uint256 lastIndex = set._values.length - 1;

            // When the value to delete is the last one, the swap operation is unnecessary. However, since this occurs
            // so rarely, we still do the swap anyway to avoid the gas cost of adding an 'if' statement.

            bytes32 lastvalue = set._values[lastIndex];

            // Move the last value to the index where the value to delete is
            set._values[toDeleteIndex] = lastvalue;
            // Update the index for the moved value
            set._indexes[lastvalue] = toDeleteIndex + 1; // All indexes are 1-based

            // Delete the slot where the moved value was stored
            set._values.pop();

            // Delete the index for the deleted slot
            delete set._indexes[value];

            return true;
        } else {
            return false;
        }
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function _contains(Set storage set, bytes32 value) private view returns (bool) {
        return set._indexes[value] != 0;
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function _length(Set storage set) private view returns (uint256) {
        return set._values.length;
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function _at(Set storage set, uint256 index) private view returns (bytes32) {
        require(set._values.length > index, "EnumerableSet: index out of bounds");
        return set._values[index];
    }

    // AddressSet

    struct AddressSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(AddressSet storage set, address value) internal returns (bool) {
        return _add(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(AddressSet storage set, address value) internal returns (bool) {
        return _remove(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(AddressSet storage set, address value) internal view returns (bool) {
        return _contains(set._inner, bytes32(uint256(value)));
    }

    /**
     * @dev Returns the number of values in the set. O(1).
     */
    function length(AddressSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(AddressSet storage set, uint256 index) internal view returns (address) {
        return address(uint256(_at(set._inner, index)));
    }


    // UintSet

    struct UintSet {
        Set _inner;
    }

    /**
     * @dev Add a value to a set. O(1).
     *
     * Returns true if the value was added to the set, that is if it was not
     * already present.
     */
    function add(UintSet storage set, uint256 value) internal returns (bool) {
        return _add(set._inner, bytes32(value));
    }

    /**
     * @dev Removes a value from a set. O(1).
     *
     * Returns true if the value was removed from the set, that is if it was
     * present.
     */
    function remove(UintSet storage set, uint256 value) internal returns (bool) {
        return _remove(set._inner, bytes32(value));
    }

    /**
     * @dev Returns true if the value is in the set. O(1).
     */
    function contains(UintSet storage set, uint256 value) internal view returns (bool) {
        return _contains(set._inner, bytes32(value));
    }

    /**
     * @dev Returns the number of values on the set. O(1).
     */
    function length(UintSet storage set) internal view returns (uint256) {
        return _length(set._inner);
    }

   /**
    * @dev Returns the value stored at position `index` in the set. O(1).
    *
    * Note that there are no guarantees on the ordering of values inside the
    * array, and it may change when more values are added or removed.
    *
    * Requirements:
    *
    * - `index` must be strictly less than {length}.
    */
    function at(UintSet storage set, uint256 index) internal view returns (uint256) {
        return uint256(_at(set._inner, index));
    }
}

// File: node_modules\@openzeppelin\contracts\utils\Address.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.2;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return _functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        return _functionCallWithValue(target, data, value, errorMessage);
    }

    function _functionCallWithValue(address target, bytes memory data, uint256 weiValue, string memory errorMessage) private returns (bytes memory) {
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: weiValue }(data);
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// File: node_modules\@openzeppelin\contracts\GSN\Context.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// File: @openzeppelin\contracts\access\AccessControl.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;




/**
 * @dev Contract module that allows children to implement role-based access
 * control mechanisms.
 *
 * Roles are referred to by their `bytes32` identifier. These should be exposed
 * in the external API and be unique. The best way to achieve this is by
 * using `public constant` hash digests:
 *
 * ```
 * bytes32 public constant MY_ROLE = keccak256("MY_ROLE");
 * ```
 *
 * Roles can be used to represent a set of permissions. To restrict access to a
 * function call, use {hasRole}:
 *
 * ```
 * function foo() public {
 *     require(hasRole(MY_ROLE, msg.sender));
 *     ...
 * }
 * ```
 *
 * Roles can be granted and revoked dynamically via the {grantRole} and
 * {revokeRole} functions. Each role has an associated admin role, and only
 * accounts that have a role's admin role can call {grantRole} and {revokeRole}.
 *
 * By default, the admin role for all roles is `DEFAULT_ADMIN_ROLE`, which means
 * that only accounts with this role will be able to grant or revoke other
 * roles. More complex role relationships can be created by using
 * {_setRoleAdmin}.
 *
 * WARNING: The `DEFAULT_ADMIN_ROLE` is also its own admin: it has permission to
 * grant and revoke this role. Extra precautions should be taken to secure
 * accounts that have been granted it.
 */
abstract contract AccessControl is Context {
    using EnumerableSet for EnumerableSet.AddressSet;
    using Address for address;

    struct RoleData {
        EnumerableSet.AddressSet members;
        bytes32 adminRole;
    }

    mapping (bytes32 => RoleData) private _roles;

    bytes32 public constant DEFAULT_ADMIN_ROLE = 0x00;

    /**
     * @dev Emitted when `newAdminRole` is set as ``role``'s admin role, replacing `previousAdminRole`
     *
     * `DEFAULT_ADMIN_ROLE` is the starting admin for all roles, despite
     * {RoleAdminChanged} not being emitted signaling this.
     *
     * _Available since v3.1._
     */
    event RoleAdminChanged(bytes32 indexed role, bytes32 indexed previousAdminRole, bytes32 indexed newAdminRole);

    /**
     * @dev Emitted when `account` is granted `role`.
     *
     * `sender` is the account that originated the contract call, an admin role
     * bearer except when using {_setupRole}.
     */
    event RoleGranted(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Emitted when `account` is revoked `role`.
     *
     * `sender` is the account that originated the contract call:
     *   - if using `revokeRole`, it is the admin role bearer
     *   - if using `renounceRole`, it is the role bearer (i.e. `account`)
     */
    event RoleRevoked(bytes32 indexed role, address indexed account, address indexed sender);

    /**
     * @dev Returns `true` if `account` has been granted `role`.
     */
    function hasRole(bytes32 role, address account) public view returns (bool) {
        return _roles[role].members.contains(account);
    }

    /**
     * @dev Returns the number of accounts that have `role`. Can be used
     * together with {getRoleMember} to enumerate all bearers of a role.
     */
    function getRoleMemberCount(bytes32 role) public view returns (uint256) {
        return _roles[role].members.length();
    }

    /**
     * @dev Returns one of the accounts that have `role`. `index` must be a
     * value between 0 and {getRoleMemberCount}, non-inclusive.
     *
     * Role bearers are not sorted in any particular way, and their ordering may
     * change at any point.
     *
     * WARNING: When using {getRoleMember} and {getRoleMemberCount}, make sure
     * you perform all queries on the same block. See the following
     * https://forum.openzeppelin.com/t/iterating-over-elements-on-enumerableset-in-openzeppelin-contracts/2296[forum post]
     * for more information.
     */
    function getRoleMember(bytes32 role, uint256 index) public view returns (address) {
        return _roles[role].members.at(index);
    }

    /**
     * @dev Returns the admin role that controls `role`. See {grantRole} and
     * {revokeRole}.
     *
     * To change a role's admin, use {_setRoleAdmin}.
     */
    function getRoleAdmin(bytes32 role) public view returns (bytes32) {
        return _roles[role].adminRole;
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function grantRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to grant");

        _grantRole(role, account);
    }

    /**
     * @dev Revokes `role` from `account`.
     *
     * If `account` had been granted `role`, emits a {RoleRevoked} event.
     *
     * Requirements:
     *
     * - the caller must have ``role``'s admin role.
     */
    function revokeRole(bytes32 role, address account) public virtual {
        require(hasRole(_roles[role].adminRole, _msgSender()), "AccessControl: sender must be an admin to revoke");

        _revokeRole(role, account);
    }

    /**
     * @dev Revokes `role` from the calling account.
     *
     * Roles are often managed via {grantRole} and {revokeRole}: this function's
     * purpose is to provide a mechanism for accounts to lose their privileges
     * if they are compromised (such as when a trusted device is misplaced).
     *
     * If the calling account had been granted `role`, emits a {RoleRevoked}
     * event.
     *
     * Requirements:
     *
     * - the caller must be `account`.
     */
    function renounceRole(bytes32 role, address account) public virtual {
        require(account == _msgSender(), "AccessControl: can only renounce roles for self");

        _revokeRole(role, account);
    }

    /**
     * @dev Grants `role` to `account`.
     *
     * If `account` had not been already granted `role`, emits a {RoleGranted}
     * event. Note that unlike {grantRole}, this function doesn't perform any
     * checks on the calling account.
     *
     * [WARNING]
     * ====
     * This function should only be called from the constructor when setting
     * up the initial roles for the system.
     *
     * Using this function in any other way is effectively circumventing the admin
     * system imposed by {AccessControl}.
     * ====
     */
    function _setupRole(bytes32 role, address account) internal virtual {
        _grantRole(role, account);
    }

    /**
     * @dev Sets `adminRole` as ``role``'s admin role.
     *
     * Emits a {RoleAdminChanged} event.
     */
    function _setRoleAdmin(bytes32 role, bytes32 adminRole) internal virtual {
        emit RoleAdminChanged(role, _roles[role].adminRole, adminRole);
        _roles[role].adminRole = adminRole;
    }

    function _grantRole(bytes32 role, address account) private {
        if (_roles[role].members.add(account)) {
            emit RoleGranted(role, account, _msgSender());
        }
    }

    function _revokeRole(bytes32 role, address account) private {
        if (_roles[role].members.remove(account)) {
            emit RoleRevoked(role, account, _msgSender());
        }
    }
}

// File: node_modules\@openzeppelin\contracts\token\ERC20\IERC20.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

// File: node_modules\@openzeppelin\contracts\math\SafeMath.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        return sub(a, b, "SafeMath: subtraction overflow");
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        return div(a, b, "SafeMath: division by zero");
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        return mod(a, b, "SafeMath: modulo by zero");
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts with custom message when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b != 0, errorMessage);
        return a % b;
    }
}

// File: @openzeppelin\contracts\token\ERC20\ERC20.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;





/**
 * @dev Implementation of the {IERC20} interface.
 *
 * This implementation is agnostic to the way tokens are created. This means
 * that a supply mechanism has to be added in a derived contract using {_mint}.
 * For a generic mechanism see {ERC20PresetMinterPauser}.
 *
 * TIP: For a detailed writeup see our guide
 * https://forum.zeppelin.solutions/t/how-to-implement-erc20-supply-mechanisms/226[How
 * to implement supply mechanisms].
 *
 * We have followed general OpenZeppelin guidelines: functions revert instead
 * of returning `false` on failure. This behavior is nonetheless conventional
 * and does not conflict with the expectations of ERC20 applications.
 *
 * Additionally, an {Approval} event is emitted on calls to {transferFrom}.
 * This allows applications to reconstruct the allowance for all accounts just
 * by listening to said events. Other implementations of the EIP may not emit
 * these events, as it isn't required by the specification.
 *
 * Finally, the non-standard {decreaseAllowance} and {increaseAllowance}
 * functions have been added to mitigate the well-known issues around setting
 * allowances. See {IERC20-approve}.
 */
contract ERC20 is Context, IERC20 {
    using SafeMath for uint256;
    using Address for address;

    mapping (address => uint256) private _balances;

    mapping (address => mapping (address => uint256)) private _allowances;

    uint256 private _totalSupply;

    string private _name;
    string private _symbol;
    uint8 private _decimals;

    /**
     * @dev Sets the values for {name} and {symbol}, initializes {decimals} with
     * a default value of 18.
     *
     * To select a different value for {decimals}, use {_setupDecimals}.
     *
     * All three of these values are immutable: they can only be set once during
     * construction.
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;
        _decimals = 18;
    }

    /**
     * @dev Returns the name of the token.
     */
    function name() public view returns (string memory) {
        return _name;
    }

    /**
     * @dev Returns the symbol of the token, usually a shorter version of the
     * name.
     */
    function symbol() public view returns (string memory) {
        return _symbol;
    }

    /**
     * @dev Returns the number of decimals used to get its user representation.
     * For example, if `decimals` equals `2`, a balance of `505` tokens should
     * be displayed to a user as `5,05` (`505 / 10 ** 2`).
     *
     * Tokens usually opt for a value of 18, imitating the relationship between
     * Ether and Wei. This is the value {ERC20} uses, unless {_setupDecimals} is
     * called.
     *
     * NOTE: This information is only used for _display_ purposes: it in
     * no way affects any of the arithmetic of the contract, including
     * {IERC20-balanceOf} and {IERC20-transfer}.
     */
    function decimals() public view returns (uint8) {
        return _decimals;
    }

    /**
     * @dev See {IERC20-totalSupply}.
     */
    function totalSupply() public view override returns (uint256) {
        return _totalSupply;
    }

    /**
     * @dev See {IERC20-balanceOf}.
     */
    function balanceOf(address account) public view override returns (uint256) {
        return _balances[account];
    }

    /**
     * @dev See {IERC20-transfer}.
     *
     * Requirements:
     *
     * - `recipient` cannot be the zero address.
     * - the caller must have a balance of at least `amount`.
     */
    function transfer(address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(_msgSender(), recipient, amount);
        return true;
    }

    /**
     * @dev See {IERC20-allowance}.
     */
    function allowance(address owner, address spender) public view virtual override returns (uint256) {
        return _allowances[owner][spender];
    }

    /**
     * @dev See {IERC20-approve}.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function approve(address spender, uint256 amount) public virtual override returns (bool) {
        _approve(_msgSender(), spender, amount);
        return true;
    }

    /**
     * @dev See {IERC20-transferFrom}.
     *
     * Emits an {Approval} event indicating the updated allowance. This is not
     * required by the EIP. See the note at the beginning of {ERC20};
     *
     * Requirements:
     * - `sender` and `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     * - the caller must have allowance for ``sender``'s tokens of at least
     * `amount`.
     */
    function transferFrom(address sender, address recipient, uint256 amount) public virtual override returns (bool) {
        _transfer(sender, recipient, amount);
        _approve(sender, _msgSender(), _allowances[sender][_msgSender()].sub(amount, "ERC20: transfer amount exceeds allowance"));
        return true;
    }

    /**
     * @dev Atomically increases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     */
    function increaseAllowance(address spender, uint256 addedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].add(addedValue));
        return true;
    }

    /**
     * @dev Atomically decreases the allowance granted to `spender` by the caller.
     *
     * This is an alternative to {approve} that can be used as a mitigation for
     * problems described in {IERC20-approve}.
     *
     * Emits an {Approval} event indicating the updated allowance.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `spender` must have allowance for the caller of at least
     * `subtractedValue`.
     */
    function decreaseAllowance(address spender, uint256 subtractedValue) public virtual returns (bool) {
        _approve(_msgSender(), spender, _allowances[_msgSender()][spender].sub(subtractedValue, "ERC20: decreased allowance below zero"));
        return true;
    }

    /**
     * @dev Moves tokens `amount` from `sender` to `recipient`.
     *
     * This is internal function is equivalent to {transfer}, and can be used to
     * e.g. implement automatic token fees, slashing mechanisms, etc.
     *
     * Emits a {Transfer} event.
     *
     * Requirements:
     *
     * - `sender` cannot be the zero address.
     * - `recipient` cannot be the zero address.
     * - `sender` must have a balance of at least `amount`.
     */
    function _transfer(address sender, address recipient, uint256 amount) internal virtual {
        require(sender != address(0), "ERC20: transfer from the zero address");
        require(recipient != address(0), "ERC20: transfer to the zero address");

        _beforeTokenTransfer(sender, recipient, amount);

        _balances[sender] = _balances[sender].sub(amount, "ERC20: transfer amount exceeds balance");
        _balances[recipient] = _balances[recipient].add(amount);
        emit Transfer(sender, recipient, amount);
    }

    /** @dev Creates `amount` tokens and assigns them to `account`, increasing
     * the total supply.
     *
     * Emits a {Transfer} event with `from` set to the zero address.
     *
     * Requirements
     *
     * - `to` cannot be the zero address.
     */
    function _mint(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: mint to the zero address");

        _beforeTokenTransfer(address(0), account, amount);

        _totalSupply = _totalSupply.add(amount);
        _balances[account] = _balances[account].add(amount);
        emit Transfer(address(0), account, amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, reducing the
     * total supply.
     *
     * Emits a {Transfer} event with `to` set to the zero address.
     *
     * Requirements
     *
     * - `account` cannot be the zero address.
     * - `account` must have at least `amount` tokens.
     */
    function _burn(address account, uint256 amount) internal virtual {
        require(account != address(0), "ERC20: burn from the zero address");

        _beforeTokenTransfer(account, address(0), amount);

        _balances[account] = _balances[account].sub(amount, "ERC20: burn amount exceeds balance");
        _totalSupply = _totalSupply.sub(amount);
        emit Transfer(account, address(0), amount);
    }

    /**
     * @dev Sets `amount` as the allowance of `spender` over the `owner` s tokens.
     *
     * This internal function is equivalent to `approve`, and can be used to
     * e.g. set automatic allowances for certain subsystems, etc.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `owner` cannot be the zero address.
     * - `spender` cannot be the zero address.
     */
    function _approve(address owner, address spender, uint256 amount) internal virtual {
        require(owner != address(0), "ERC20: approve from the zero address");
        require(spender != address(0), "ERC20: approve to the zero address");

        _allowances[owner][spender] = amount;
        emit Approval(owner, spender, amount);
    }

    /**
     * @dev Sets {decimals} to a value other than the default one of 18.
     *
     * WARNING: This function should only be called from the constructor. Most
     * applications that interact with token contracts will not expect
     * {decimals} to ever change, and may work incorrectly if it does.
     */
    function _setupDecimals(uint8 decimals_) internal {
        _decimals = decimals_;
    }

    /**
     * @dev Hook that is called before any transfer of tokens. This includes
     * minting and burning.
     *
     * Calling conditions:
     *
     * - when `from` and `to` are both non-zero, `amount` of ``from``'s tokens
     * will be to transferred to `to`.
     * - when `from` is zero, `amount` tokens will be minted for `to`.
     * - when `to` is zero, `amount` of ``from``'s tokens will be burned.
     * - `from` and `to` are never both zero.
     *
     * To learn more about hooks, head to xref:ROOT:extending-contracts.adoc#using-hooks[Using Hooks].
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual { }
}


// File: @openzeppelin\contracts\token\ERC20\ERC20Burnable.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;



/**
 * @dev Extension of {ERC20} that allows token holders to destroy both their own
 * tokens and those that they have an allowance for, in a way that can be
 * recognized off-chain (via event analysis).
 */
abstract contract ERC20Burnable is Context, ERC20 {
    /**
     * @dev Destroys `amount` tokens from the caller.
     *
     * See {ERC20-_burn}.
     */
    function burn(uint256 amount) public virtual {
        _burn(_msgSender(), amount);
    }

    /**
     * @dev Destroys `amount` tokens from `account`, deducting from the caller's
     * allowance.
     *
     * See {ERC20-_burn} and {ERC20-allowance}.
     *
     * Requirements:
     *
     * - the caller must have allowance for ``accounts``'s tokens of at least
     * `amount`.
     */
    function burnFrom(address account, uint256 amount) public virtual {
        uint256 decreasedAllowance = allowance(account, _msgSender()).sub(amount, "ERC20: burn amount exceeds allowance");

        _approve(account, _msgSender(), decreasedAllowance);
        _burn(account, amount);
    }
}

// File: node_modules\@openzeppelin\contracts\utils\Pausable.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;


/**
 * @dev Contract module which allows children to implement an emergency stop
 * mechanism that can be triggered by an authorized account.
 *
 * This module is used through inheritance. It will make available the
 * modifiers `whenNotPaused` and `whenPaused`, which can be applied to
 * the functions of your contract. Note that they will not be pausable by
 * simply including this module, only once the modifiers are put in place.
 */
contract Pausable is Context {
    /**
     * @dev Emitted when the pause is triggered by `account`.
     */
    event Paused(address account);

    /**
     * @dev Emitted when the pause is lifted by `account`.
     */
    event Unpaused(address account);

    bool private _paused;

    /**
     * @dev Initializes the contract in unpaused state.
     */
    constructor () internal {
        _paused = false;
    }

    /**
     * @dev Returns true if the contract is paused, and false otherwise.
     */
    function paused() public view returns (bool) {
        return _paused;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is not paused.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    modifier whenNotPaused() {
        require(!_paused, "Pausable: paused");
        _;
    }

    /**
     * @dev Modifier to make a function callable only when the contract is paused.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    modifier whenPaused() {
        require(_paused, "Pausable: not paused");
        _;
    }

    /**
     * @dev Triggers stopped state.
     *
     * Requirements:
     *
     * - The contract must not be paused.
     */
    function _pause() internal virtual whenNotPaused {
        _paused = true;
        emit Paused(_msgSender());
    }

    /**
     * @dev Returns to normal state.
     *
     * Requirements:
     *
     * - The contract must be paused.
     */
    function _unpause() internal virtual whenPaused {
        _paused = false;
        emit Unpaused(_msgSender());
    }
}

// File: @openzeppelin\contracts\token\ERC20\ERC20Pausable.sol

// SPDX-License-Identifier: MIT

pragma solidity ^0.6.0;



/**
 * @dev ERC20 token with pausable token transfers, minting and burning.
 *
 * Useful for scenarios such as preventing trades until the end of an evaluation
 * period, or having an emergency switch for freezing all token transfers in the
 * event of a large bug.
 */
abstract contract ERC20Pausable is ERC20, Pausable {
    /**
     * @dev See {ERC20-_beforeTokenTransfer}.
     *
     * Requirements:
     *
     * - the contract must not be paused.
     */
    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override {
        super._beforeTokenTransfer(from, to, amount);

        require(!paused(), "ERC20Pausable: token transfer while paused");
    }
}

// File: contracts\NuNetToken.sol

pragma solidity ^0.6.0;






/**
 * @dev {ERC20} token, including:
 *
 *  - ability for holders to burn (destroy) their tokens
 *  - a minter role that allows for token minting (creation)
 *  - a pauser role that allows to stop all token transfers
 *
 * This contract uses {AccessControl} to lock permissioned functions using the
 * different roles - head to its documentation for details.
 *
 * The account that deploys the contract will be granted the minter and pauser
 * roles, as well as the default admin role, which will let it grant both minter
 * and pauser roles to other accounts.
 */
 contract NuNetToken is Context, AccessControl, ERC20Burnable, ERC20Pausable {
    bytes32 public constant MINTER_ROLE = keccak256("MINTER_ROLE");
    bytes32 public constant PAUSER_ROLE = keccak256("PAUSER_ROLE");

    uint256 public constant MAX_SUPPLY = 1000000000 * 10**uint256(6);

    /**
     * @dev Grants `DEFAULT_ADMIN_ROLE`, `MINTER_ROLE` and `PAUSER_ROLE` to the
     * account that deploys the contract.
     *
     * See {ERC20-constructor}.
     */
    constructor(string memory name, string memory symbol) public ERC20(name, symbol) {
        _setupRole(DEFAULT_ADMIN_ROLE, _msgSender());

        _setupRole(MINTER_ROLE, _msgSender());
        _setupRole(PAUSER_ROLE, _msgSender());

        // Setting Demcimal Places to 6
        _setupDecimals(6);
    }

    /**
     * @dev Creates `amount` new tokens for `to`.
     *
     * See {ERC20-_mint}.
     *
     * Requirements:
     *
     * - the caller must have the `MINTER_ROLE`.
     */
    function mint(address to, uint256 amount) public virtual {
        require(hasRole(MINTER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have minter role to mint");
        require(totalSupply().add(amount) <= MAX_SUPPLY, "Mint: Cannot mint more than initial supply");
        _mint(to, amount);
    }

    /**
     * @dev Pauses all token transfers.
     *
     * See {ERC20Pausable} and {Pausable-_pause}.
     *
     * Requirements:
     *
     * - the caller must have the `PAUSER_ROLE`.
     */
    function pause() public virtual {
        require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to pause");
        _pause();
    }

    /**
     * @dev Unpauses all token transfers.
     *
     * See {ERC20Pausable} and {Pausable-_unpause}.
     *
     * Requirements:
     *
     * - the caller must have the `PAUSER_ROLE`.
     */
    function unpause() public virtual {
        require(hasRole(PAUSER_ROLE, _msgSender()), "ERC20PresetMinterPauser: must have pauser role to unpause");
        _unpause();
    }

    function _beforeTokenTransfer(address from, address to, uint256 amount) internal virtual override(ERC20, ERC20Pausable) {
        super._beforeTokenTransfer(from, to, amount);
    }
}

// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
import "@0x/contracts-erc20/contracts/src/v06/IEtherTokenV06.sol";
import "../migrations/LibMigrate.sol";
import "../external/IAllowanceTarget.sol";
import "../fixins/FixinCommon.sol";
import "./IFeature.sol";
import "./IUniswapFeature.sol";
/// @dev VIP uniswap fill functions.
contract UniswapFeature is
    IFeature,
    IUniswapFeature,
    FixinCommon
{
    /// @dev Name of this feature.
    string public constant override FEATURE_NAME = "UniswapFeature";
    /// @dev Version of this feature.
    uint256 public immutable override FEATURE_VERSION = _encodeVersion(1, 1, 1);
    /// @dev A bloom filter for tokens that consume all gas when `transferFrom()` fails.
    bytes32 public immutable GREEDY_TOKENS_BLOOM_FILTER;
    /// @dev WETH contract.
    IEtherTokenV06 private immutable WETH;
    /// @dev AllowanceTarget instance.
    IAllowanceTarget private immutable ALLOWANCE_TARGET;
    // 0xFF + address of the UniswapV2Factory contract.
    uint256 constant private FF_UNISWAP_FACTORY = 0xFF5C69bEe701ef814a2B6a3EDD4B1652CB9cc5aA6f0000000000000000000000;
    // 0xFF + address of the (Sushiswap) UniswapV2Factory contract.
    uint256 constant private FF_SUSHISWAP_FACTORY = 0xFFC0AEe478e3658e2610c5F7A4A2E1777cE9e4f2Ac0000000000000000000000;
    // Init code hash of the UniswapV2Pair contract.
    uint256 constant private UNISWAP_PAIR_INIT_CODE_HASH = 0x96e8ac4277198ff8b6f785478aa9a39f403cb768dd02cbee326c3e7da348845f;
    // Init code hash of the (Sushiswap) UniswapV2Pair contract.
    uint256 constant private SUSHISWAP_PAIR_INIT_CODE_HASH = 0xe18a34eb0e04b04f7a0ac29a6e80748dca96319b42c54d679cb821dca90c6303;
    // Mask of the lower 20 bytes of a bytes32.
    uint256 constant private ADDRESS_MASK = 0x000000000000000000000000ffffffffffffffffffffffffffffffffffffffff;
    // ETH pseudo-token address.
    uint256 constant private ETH_TOKEN_ADDRESS_32 = 0x000000000000000000000000eeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee;
    // Maximum token quantity that can be swapped against the UniswapV2Pair contract.
    uint256 constant private MAX_SWAP_AMOUNT = 2**112;
    // bytes4(keccak256("executeCall(address,bytes)"))
    uint256 constant private ALLOWANCE_TARGET_EXECUTE_CALL_SELECTOR_32 = 0xbca8c7b500000000000000000000000000000000000000000000000000000000;
    // bytes4(keccak256("getReserves()"))
    uint256 constant private UNISWAP_PAIR_RESERVES_CALL_SELECTOR_32 = 0x0902f1ac00000000000000000000000000000000000000000000000000000000;
    // bytes4(keccak256("swap(uint256,uint256,address,bytes)"))
    uint256 constant private UNISWAP_PAIR_SWAP_CALL_SELECTOR_32 = 0x022c0d9f00000000000000000000000000000000000000000000000000000000;
    // bytes4(keccak256("transferFrom(address,address,uint256)"))
    uint256 constant private TRANSFER_FROM_CALL_SELECTOR_32 = 0x23b872dd00000000000000000000000000000000000000000000000000000000;
    // bytes4(keccak256("allowance(address,address)"))
    uint256 constant private ALLOWANCE_CALL_SELECTOR_32 = 0xdd62ed3e00000000000000000000000000000000000000000000000000000000;
    // bytes4(keccak256("withdraw(uint256)"))
    uint256 constant private WETH_WITHDRAW_CALL_SELECTOR_32 = 0x2e1a7d4d00000000000000000000000000000000000000000000000000000000;
    // bytes4(keccak256("deposit()"))
    uint256 constant private WETH_DEPOSIT_CALL_SELECTOR_32 = 0xd0e30db000000000000000000000000000000000000000000000000000000000;
    // bytes4(keccak256("transfer(address,uint256)"))
    uint256 constant private ERC20_TRANSFER_CALL_SELECTOR_32 = 0xa9059cbb00000000000000000000000000000000000000000000000000000000;
    /// @dev Construct this contract.
    /// @param weth The WETH contract.
    /// @param allowanceTarget The AllowanceTarget contract.
    /// @param greedyTokensBloomFilter The bloom filter for greedy tokens.
    constructor(
        IEtherTokenV06 weth,
        IAllowanceTarget allowanceTarget,
        bytes32 greedyTokensBloomFilter
    ) public {
        WETH = weth;
        ALLOWANCE_TARGET = allowanceTarget;
        GREEDY_TOKENS_BLOOM_FILTER = greedyTokensBloomFilter;
    }
    /// @dev Initialize and register this feature.
    ///      Should be delegatecalled by `Migrate.migrate()`.
    /// @return success `LibMigrate.SUCCESS` on success.
    function migrate()
        external
        returns (bytes4 success)
    {
        _registerFeatureFunction(this.sellToUniswap.selector);
        return LibMigrate.MIGRATE_SUCCESS;
    }
    /// @dev Efficiently sell directly to uniswap/sushiswap.
    /// @param tokens Sell path.
    /// @param sellAmount of `tokens[0]` Amount to sell.
    /// @param minBuyAmount Minimum amount of `tokens[-1]` to buy.
    /// @param isSushi Use sushiswap if true.
    /// @return buyAmount Amount of `tokens[-1]` bought.
    function sellToUniswap(
        IERC20TokenV06[] calldata tokens,
        uint256 sellAmount,
        uint256 minBuyAmount,
        bool isSushi
    )
        external
        payable
        override
        returns (uint256 buyAmount)
    {
        require(tokens.length > 1, "UniswapFeature/InvalidTokensLength");
        {
            // Load immutables onto the stack.
            IEtherTokenV06 weth = WETH;
            IAllowanceTarget allowanceTarget = ALLOWANCE_TARGET;
            bytes32 greedyTokensBloomFilter = GREEDY_TOKENS_BLOOM_FILTER;
            // Store some vars in memory to get around stack limits.
            assembly {
                // calldataload(mload(0xA00)) == first element of `tokens` array
                mstore(0xA00, add(calldataload(0x04), 0x24))
                // mload(0xA20) == isSushi
                mstore(0xA20, isSushi)
                // mload(0xA40) == WETH
                mstore(0xA40, weth)
                // mload(0xA60) == ALLOWANCE_TARGET
                mstore(0xA60, allowanceTarget)
                // mload(0xA80) == GREEDY_TOKENS_BLOOM_FILTER
                mstore(0xA80, greedyTokensBloomFilter)
            }
        }
        assembly {
            // numPairs == tokens.length - 1
            let numPairs := sub(calldataload(add(calldataload(0x04), 0x4)), 1)
            // We use the previous buy amount as the sell amount for the next
            // pair in a path. So for the first swap we want to set it to `sellAmount`.
            buyAmount := sellAmount
            let buyToken
            let nextPair := 0
            for {let i := 0} lt(i, numPairs) {i := add(i, 1)} {
                // sellToken = tokens[i]
                let sellToken := loadTokenAddress(i)
                // buyToken = tokens[i+1]
                buyToken := loadTokenAddress(add(i, 1))
                // The canonical ordering of this token pair.
                let pairOrder := lt(normalizeToken(sellToken), normalizeToken(buyToken))
                // Compute the pair address if it hasn't already been computed
                // from the last iteration.
                let pair := nextPair
                if iszero(pair) {
                    pair := computePairAddress(sellToken, buyToken)
                    nextPair := 0
                }
                if iszero(i) {
                    // This is the first token in the path.
                    switch eq(sellToken, ETH_TOKEN_ADDRESS_32)
                        case 0 { // Not selling ETH. Selling an ERC20 instead.
                            // Make sure ETH was not attached to the call.
                            if gt(callvalue(), 0) {
                                revert(0, 0)
                            }
                            // For the first pair we need to transfer sellTokens into the
                            // pair contract.
                            moveTakerTokensTo(sellToken, pair, sellAmount)
                        }
                        default {
                            // If selling ETH, we need to wrap it to WETH and transfer to the
                            // pair contract.
                            if iszero(eq(callvalue(), sellAmount)) {
                                revert(0, 0)
                            }
                            sellToken := mload(0xA40)// Re-assign to WETH
                            // Call `WETH.deposit{value: sellAmount}()`
                            mstore(0xB00, WETH_DEPOSIT_CALL_SELECTOR_32)
                            if iszero(call(gas(), sellToken, sellAmount, 0xB00, 0x4, 0x00, 0x0)) {
                                bubbleRevert()
                            }
                            // Call `WETH.transfer(pair, sellAmount)`
                            mstore(0xB00, ERC20_TRANSFER_CALL_SELECTOR_32)
                            mstore(0xB04, pair)
                            mstore(0xB24, sellAmount)
                            if iszero(call(gas(), sellToken, 0, 0xB00, 0x44, 0x00, 0x0)) {
                                bubbleRevert()
                            }
                        }
                    // No need to check results, if deposit/transfers failed the UniswapV2Pair will
                    // reject our trade (or it may succeed if somehow the reserve was out of sync)
                    // this is fine for the taker.
                }
                // Call pair.getReserves(), store the results at `0xC00`
                mstore(0xB00, UNISWAP_PAIR_RESERVES_CALL_SELECTOR_32)
                if iszero(staticcall(gas(), pair, 0xB00, 0x4, 0xC00, 0x40)) {
                    bubbleRevert()
                }
                // Revert if the pair contract does not return at least two words.
                if lt(returndatasize(), 0x40) {
                    revert(0,0)
                }
                // Sell amount for this hop is the previous buy amount.
                let pairSellAmount := buyAmount
                // Compute the buy amount based on the pair reserves.
                {
                    let sellReserve
                    let buyReserve
                    switch iszero(pairOrder)
                        case 0 {
                            // Transpose if pair order is different.
                            sellReserve := mload(0xC00)
                            buyReserve := mload(0xC20)
                        }
                        default {
                            sellReserve := mload(0xC20)
                            buyReserve := mload(0xC00)
                        }
                    // Ensure that the sellAmount is < 2B9B9B2.
                    if gt(pairSellAmount, MAX_SWAP_AMOUNT) {
                        revert(0, 0)
                    }
                    // Pairs are in the range (0, 2B9B9B2) so this shouldn't overflow.
                    // buyAmount = (pairSellAmount * 997 * buyReserve) /
                    //     (pairSellAmount * 997 + sellReserve * 1000);
                    let sellAmountWithFee := mul(pairSellAmount, 997)
                    buyAmount := div(
                        mul(sellAmountWithFee, buyReserve),
                        add(sellAmountWithFee, mul(sellReserve, 1000))
                    )
                }
                let receiver
                // Is this the last pair contract?
                switch eq(add(i, 1), numPairs)
                    case 0 {
                        // Not the last pair contract, so forward bought tokens to
                        // the next pair contract.
                        nextPair := computePairAddress(
                            buyToken,
                            loadTokenAddress(add(i, 2))
                        )
                        receiver := nextPair
                    }
                    default {
                        // The last pair contract.
                        // Forward directly to taker UNLESS they want ETH back.
                        switch eq(buyToken, ETH_TOKEN_ADDRESS_32)
                            case 0 {
                                receiver := caller()
                            }
                            default {
                                receiver := address()
                            }
                    }
                // Call pair.swap()
                mstore(0xB00, UNISWAP_PAIR_SWAP_CALL_SELECTOR_32)
                switch pairOrder
                    case 0 {
                        mstore(0xB04, buyAmount)
                        mstore(0xB24, 0)
                    }
                    default {
                        mstore(0xB04, 0)
                        mstore(0xB24, buyAmount)
                    }
                mstore(0xB44, receiver)
                mstore(0xB64, 0x80)
                mstore(0xB84, 0)
                if iszero(call(gas(), pair, 0, 0xB00, 0xA4, 0, 0)) {
                    bubbleRevert()
                }
            } // End for-loop.
            // If buying ETH, unwrap the WETH first
            if eq(buyToken, ETH_TOKEN_ADDRESS_32) {
                // Call `WETH.withdraw(buyAmount)`
                mstore(0xB00, WETH_WITHDRAW_CALL_SELECTOR_32)
                mstore(0xB04, buyAmount)
                if iszero(call(gas(), mload(0xA40), 0, 0xB00, 0x24, 0x00, 0x0)) {
                    bubbleRevert()
                }
                // Transfer ETH to the caller.
                if iszero(call(gas(), caller(), buyAmount, 0xB00, 0x0, 0x00, 0x0)) {
                    bubbleRevert()
                }
            }
            // Functions ///////////////////////////////////////////////////////
            // Load a token address from the `tokens` calldata argument.
            function loadTokenAddress(idx) -> addr {
                addr := and(ADDRESS_MASK, calldataload(add(mload(0xA00), mul(idx, 0x20))))
            }
            // Convert ETH pseudo-token addresses to WETH.
            function normalizeToken(token) -> normalized {
                normalized := token
                // Translate ETH pseudo-tokens to WETH.
                if eq(token, ETH_TOKEN_ADDRESS_32) {
                    normalized := mload(0xA40)
                }
            }
            // Compute the address of the UniswapV2Pair contract given two
            // tokens.
            function computePairAddress(tokenA, tokenB) -> pair {
                // Convert ETH pseudo-token addresses to WETH.
                tokenA := normalizeToken(tokenA)
                tokenB := normalizeToken(tokenB)
                // There is one contract for every combination of tokens,
                // which is deployed using CREATE2.
                // The derivation of this address is given by:
                //   address(keccak256(abi.encodePacked(
                //       bytes(0xFF),
                //       address(UNISWAP_FACTORY_ADDRESS),
                //       keccak256(abi.encodePacked(
                //           tokenA < tokenB ? tokenA : tokenB,
                //           tokenA < tokenB ? tokenB : tokenA,
                //       )),
                //       bytes32(UNISWAP_PAIR_INIT_CODE_HASH),
                //   )));
                // Compute the salt (the hash of the sorted tokens).
                // Tokens are written in reverse memory order to packed encode
                // them as two 20-byte values in a 40-byte chunk of memory
                // starting at 0xB0C.
                switch lt(tokenA, tokenB)
                    case 0 {
                        mstore(0xB14, tokenA)
                        mstore(0xB00, tokenB)
                    }
                    default {
                        mstore(0xB14, tokenB)
                        mstore(0xB00, tokenA)
                    }
                let salt := keccak256(0xB0C, 0x28)
                // Compute the pair address by hashing all the components together.
                switch mload(0xA20) // isSushi
                    case 0 {
                        mstore(0xB00, FF_UNISWAP_FACTORY)
                        mstore(0xB15, salt)
                        mstore(0xB35, UNISWAP_PAIR_INIT_CODE_HASH)
                    }
                    default {
                        mstore(0xB00, FF_SUSHISWAP_FACTORY)
                        mstore(0xB15, salt)
                        mstore(0xB35, SUSHISWAP_PAIR_INIT_CODE_HASH)
                    }
                pair := and(ADDRESS_MASK, keccak256(0xB00, 0x55))
            }
            // Revert with the return data from the most recent call.
            function bubbleRevert() {
                returndatacopy(0, 0, returndatasize())
                revert(0, returndatasize())
            }
            // Move `amount` tokens from the taker/caller to `to`.
            function moveTakerTokensTo(token, to, amount) {
                // If the token is possibly greedy, we check the allowance rather
                // than relying on letting the transferFrom() call fail and
                // falling through to legacy allowance target because the token
                // will eat all our gas.
                if isTokenPossiblyGreedy(token) {
                    // Check if we have enough direct allowance by calling
                    // `token.allowance()``
                    mstore(0xB00, ALLOWANCE_CALL_SELECTOR_32)
                    mstore(0xB04, caller())
                    mstore(0xB24, address())
                    let success := staticcall(gas(), token, 0xB00, 0x44, 0xC00, 0x20)
                    if iszero(success) {
                        // Call to allowance() failed.
                        bubbleRevert()
                    }
                    // Make sure the allowance call returned at least a word.
                    if lt(returndatasize(), 0x20) {
                        revert(0, 0)
                    }
                    // Call succeeded.
                    // Result is stored in 0xC00-0xC20.
                    if lt(mload(0xC00), amount) {
                        // We don't have enough direct allowance, so try
                        // going through the legacy allowance taregt.
                        moveTakerTokensToWithLegacyAllowanceTarget(token, to, amount)
                        leave
                    }
                }
                // Otherwise we will optimistically try to perform a `transferFrom()`
                // directly then if it fails we will go through the legacy allowance target.
                mstore(0xB00, TRANSFER_FROM_CALL_SELECTOR_32)
                mstore(0xB04, caller())
                mstore(0xB24, to)
                mstore(0xB44, amount)
                let success := call(
                    gas(),
                    token,
                    0,
                    0xB00,
                    0x64,
                    0xC00,
                    // Copy only the first 32 bytes of return data. We
                    // only care about reading a boolean in the success
                    // case, and we discard the return data in the
                    // failure case.
                    0x20
                )
                let rdsize := returndatasize()
                // Check for ERC20 success. ERC20 tokens should
                // return a boolean, but some return nothing or
                // extra data. We accept 0-length return data as
                // success, or at least 32 bytes that starts with
                // a 32-byte boolean true.
                success := and(
                    success,                         // call itself succeeded
                    or(
                        iszero(rdsize),              // no return data, or
                        and(
                            iszero(lt(rdsize, 32)),  // at least 32 bytes
                            eq(mload(0xC00), 1)      // starts with uint256(1)
                        )
                    )
                )
                if iszero(success) {
                    // Try to fall back to the allowance target.
                    moveTakerTokensToWithLegacyAllowanceTarget(token, to, amount)
                }
            }
            // Move tokens by going through the legacy allowance target contract.
            function moveTakerTokensToWithLegacyAllowanceTarget(token, to, amount) {
                mstore(0xB00, ALLOWANCE_TARGET_EXECUTE_CALL_SELECTOR_32)
                mstore(0xB04, token)
                mstore(0xB24, 0x40)
                mstore(0xB44, 0x64)
                mstore(0xB64, TRANSFER_FROM_CALL_SELECTOR_32)
                mstore(0xB68, caller())
                mstore(0xB88, to)
                mstore(0xBA8, amount)
                if iszero(call(gas(), mload(0xA60), 0, 0xB00, 0xC8, 0x00, 0x0)) {
                    bubbleRevert()
                }
                // If this fall back failed, the swap will most likely fail
                // so there's no need to validate the result.
            }
            // Checks if a token possibly belongs to the GREEDY_TOKENS_BLOOM_FILTER
            // bloom filter.
            function isTokenPossiblyGreedy(token) -> isPossiblyGreedy {
                // The hash is given by:
                // (1 << (keccak256(token) % 256)) | (1 << (token % 256))
                mstore(0, token)
                let h := or(shl(mod(keccak256(0, 32), 256), 1), shl(mod(token, 256), 1))
                isPossiblyGreedy := eq(and(h, mload(0xA80)), h)
            }
        }
        // Revert if we bought too little.
        // TODO: replace with rich revert?
        require(buyAmount >= minBuyAmount, "UniswapFeature/UnderBought");
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
interface IERC20TokenV06 {
    // solhint-disable no-simple-event-func-name
    event Transfer(
        address indexed from,
        address indexed to,
        uint256 value
    );
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
    /// @dev send `value` token to `to` from `msg.sender`
    /// @param to The address of the recipient
    /// @param value The amount of token to be transferred
    /// @return True if transfer was successful
    function transfer(address to, uint256 value)
        external
        returns (bool);
    /// @dev send `value` token to `to` from `from` on the condition it is approved by `from`
    /// @param from The address of the sender
    /// @param to The address of the recipient
    /// @param value The amount of token to be transferred
    /// @return True if transfer was successful
    function transferFrom(
        address from,
        address to,
        uint256 value
    )
        external
        returns (bool);
    /// @dev `msg.sender` approves `spender` to spend `value` tokens
    /// @param spender The address of the account able to transfer the tokens
    /// @param value The amount of wei to be approved for transfer
    /// @return Always true if the call has enough gas to complete execution
    function approve(address spender, uint256 value)
        external
        returns (bool);
    /// @dev Query total supply of token
    /// @return Total supply of token
    function totalSupply()
        external
        view
        returns (uint256);
    /// @dev Get the balance of `owner`.
    /// @param owner The address from which the balance will be retrieved
    /// @return Balance of owner
    function balanceOf(address owner)
        external
        view
        returns (uint256);
    /// @dev Get the allowance for `spender` to spend from `owner`.
    /// @param owner The address of the account owning tokens
    /// @param spender The address of the account able to transfer the tokens
    /// @return Amount of remaining tokens allowed to spent
    function allowance(address owner, address spender)
        external
        view
        returns (uint256);
    /// @dev Get the number of decimals this token has.
    function decimals()
        external
        view
        returns (uint8);
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./IERC20TokenV06.sol";
interface IEtherTokenV06 is
    IERC20TokenV06
{
    /// @dev Wrap ether.
    function deposit() external payable;
    /// @dev Unwrap ether.
    function withdraw(uint256 amount) external;
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibOwnableRichErrors.sol";
library LibMigrate {
    /// @dev Magic bytes returned by a migrator to indicate success.
    ///      This is `keccack('MIGRATE_SUCCESS')`.
    bytes4 internal constant MIGRATE_SUCCESS = 0x2c64c5ef;
    using LibRichErrorsV06 for bytes;
    /// @dev Perform a delegatecall and ensure it returns the magic bytes.
    /// @param target The call target.
    /// @param data The call data.
    function delegatecallMigrateFunction(
        address target,
        bytes memory data
    )
        internal
    {
        (bool success, bytes memory resultData) = target.delegatecall(data);
        if (!success ||
            resultData.length != 32 ||
            abi.decode(resultData, (bytes4)) != MIGRATE_SUCCESS)
        {
            LibOwnableRichErrors.MigrateCallFailedError(target, resultData).rrevert();
        }
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibRichErrorsV06 {
    // bytes4(keccak256("Error(string)"))
    bytes4 internal constant STANDARD_ERROR_SELECTOR = 0x08c379a0;
    // solhint-disable func-name-mixedcase
    /// @dev ABI encode a standard, string revert error payload.
    ///      This is the same payload that would be included by a `revert(string)`
    ///      solidity statement. It has the function signature `Error(string)`.
    /// @param message The error string.
    /// @return The ABI encoded error.
    function StandardError(string memory message)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            STANDARD_ERROR_SELECTOR,
            bytes(message)
        );
    }
    // solhint-enable func-name-mixedcase
    /// @dev Reverts an encoded rich revert reason `errorData`.
    /// @param errorData ABI encoded error data.
    function rrevert(bytes memory errorData)
        internal
        pure
    {
        assembly {
            revert(add(errorData, 0x20), mload(errorData))
        }
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibOwnableRichErrors {
    // solhint-disable func-name-mixedcase
    function OnlyOwnerError(
        address sender,
        address owner
    )
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyOwnerError(address,address)")),
            sender,
            owner
        );
    }
    function TransferOwnerToZeroError()
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("TransferOwnerToZeroError()"))
        );
    }
    function MigrateCallFailedError(address target, bytes memory resultData)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("MigrateCallFailedError(address,bytes)")),
            target,
            resultData
        );
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/interfaces/IAuthorizableV06.sol";
/// @dev The allowance target for the TokenSpender feature.
interface IAllowanceTarget is
    IAuthorizableV06
{
    /// @dev Execute an arbitrary call. Only an authority can call this.
    /// @param target The call target.
    /// @param callData The call data.
    /// @return resultData The data returned by the call.
    function executeCall(
        address payable target,
        bytes calldata callData
    )
        external
        returns (bytes memory resultData);
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
import "./IOwnableV06.sol";
interface IAuthorizableV06 is
    IOwnableV06
{
    // Event logged when a new address is authorized.
    event AuthorizedAddressAdded(
        address indexed target,
        address indexed caller
    );
    // Event logged when a currently authorized address is unauthorized.
    event AuthorizedAddressRemoved(
        address indexed target,
        address indexed caller
    );
    /// @dev Authorizes an address.
    /// @param target Address to authorize.
    function addAuthorizedAddress(address target)
        external;
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    function removeAuthorizedAddress(address target)
        external;
    /// @dev Removes authorizion of an address.
    /// @param target Address to remove authorization from.
    /// @param index Index of target in authorities array.
    function removeAuthorizedAddressAtIndex(
        address target,
        uint256 index
    )
        external;
    /// @dev Gets all authorized addresses.
    /// @return authorizedAddresses Array of authorized addresses.
    function getAuthorizedAddresses()
        external
        view
        returns (address[] memory authorizedAddresses);
    /// @dev Whether an adderss is authorized to call privileged functions.
    /// @param addr Address to query.
    /// @return isAuthorized Whether the address is authorized.
    function authorized(address addr) external view returns (bool isAuthorized);
    /// @dev All addresseses authorized to call privileged functions.
    /// @param idx Index of authorized address.
    /// @return addr Authorized address.
    function authorities(uint256 idx) external view returns (address addr);
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
interface IOwnableV06 {
    /// @dev Emitted by Ownable when ownership is transferred.
    /// @param previousOwner The previous owner of the contract.
    /// @param newOwner The new owner of the contract.
    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);
    /// @dev Transfers ownership of the contract to a new address.
    /// @param newOwner The address that will become the owner.
    function transferOwnership(address newOwner) external;
    /// @dev The owner of this contract.
    /// @return ownerAddress The owner address.
    function owner() external view returns (address ownerAddress);
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/errors/LibRichErrorsV06.sol";
import "../errors/LibCommonRichErrors.sol";
import "../errors/LibOwnableRichErrors.sol";
import "../features/IOwnableFeature.sol";
import "../features/ISimpleFunctionRegistryFeature.sol";
/// @dev Common feature utilities.
abstract contract FixinCommon {
    using LibRichErrorsV06 for bytes;
    /// @dev The implementation address of this feature.
    address internal immutable _implementation;
    /// @dev The caller must be this contract.
    modifier onlySelf() virtual {
        if (msg.sender != address(this)) {
            LibCommonRichErrors.OnlyCallableBySelfError(msg.sender).rrevert();
        }
        _;
    }
    /// @dev The caller of this function must be the owner.
    modifier onlyOwner() virtual {
        {
            address owner = IOwnableFeature(address(this)).owner();
            if (msg.sender != owner) {
                LibOwnableRichErrors.OnlyOwnerError(
                    msg.sender,
                    owner
                ).rrevert();
            }
        }
        _;
    }
    constructor() internal {
        // Remember this feature's original address.
        _implementation = address(this);
    }
    /// @dev Registers a function implemented by this feature at `_implementation`.
    ///      Can and should only be called within a `migrate()`.
    /// @param selector The selector of the function whose implementation
    ///        is at `_implementation`.
    function _registerFeatureFunction(bytes4 selector)
        internal
    {
        ISimpleFunctionRegistryFeature(address(this)).extend(selector, _implementation);
    }
    /// @dev Encode a feature version as a `uint256`.
    /// @param major The major version number of the feature.
    /// @param minor The minor version number of the feature.
    /// @param revision The revision number of the feature.
    /// @return encodedVersion The encoded version number.
    function _encodeVersion(uint32 major, uint32 minor, uint32 revision)
        internal
        pure
        returns (uint256 encodedVersion)
    {
        return (uint256(major) << 64) | (uint256(minor) << 32) | uint256(revision);
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
library LibCommonRichErrors {
    // solhint-disable func-name-mixedcase
    function OnlyCallableBySelfError(address sender)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("OnlyCallableBySelfError(address)")),
            sender
        );
    }
    function IllegalReentrancyError(bytes4 selector, uint256 reentrancyFlags)
        internal
        pure
        returns (bytes memory)
    {
        return abi.encodeWithSelector(
            bytes4(keccak256("IllegalReentrancyError(bytes4,uint256)")),
            selector,
            reentrancyFlags
        );
    }
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-utils/contracts/src/v06/interfaces/IOwnableV06.sol";
// solhint-disable no-empty-blocks
/// @dev Owner management and migration features.
interface IOwnableFeature is
    IOwnableV06
{
    /// @dev Emitted when `migrate()` is called.
    /// @param caller The caller of `migrate()`.
    /// @param migrator The migration contract.
    /// @param newOwner The address of the new owner.
    event Migrated(address caller, address migrator, address newOwner);
    /// @dev Execute a migration function in the context of the ZeroEx contract.
    ///      The result of the function being called should be the magic bytes
    ///      0x2c64c5ef (`keccack('MIGRATE_SUCCESS')`). Only callable by the owner.
    ///      The owner will be temporarily set to `address(this)` inside the call.
    ///      Before returning, the owner will be set to `newOwner`.
    /// @param target The migrator contract address.
    /// @param newOwner The address of the new owner.
    /// @param data The call data.
    function migrate(address target, bytes calldata data, address newOwner) external;
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Basic registry management features.
interface ISimpleFunctionRegistryFeature {
    /// @dev A function implementation was updated via `extend()` or `rollback()`.
    /// @param selector The function selector.
    /// @param oldImpl The implementation contract address being replaced.
    /// @param newImpl The replacement implementation contract address.
    event ProxyFunctionUpdated(bytes4 indexed selector, address oldImpl, address newImpl);
    /// @dev Roll back to a prior implementation of a function.
    /// @param selector The function selector.
    /// @param targetImpl The address of an older implementation of the function.
    function rollback(bytes4 selector, address targetImpl) external;
    /// @dev Register or replace a function.
    /// @param selector The function selector.
    /// @param impl The implementation contract for the function.
    function extend(bytes4 selector, address impl) external;
    /// @dev Retrieve the length of the rollback history for a function.
    /// @param selector The function selector.
    /// @return rollbackLength The number of items in the rollback history for
    ///         the function.
    function getRollbackLength(bytes4 selector)
        external
        view
        returns (uint256 rollbackLength);
    /// @dev Retrieve an entry in the rollback history for a function.
    /// @param selector The function selector.
    /// @param idx The index in the rollback history.
    /// @return impl An implementation address for the function at
    ///         index `idx`.
    function getRollbackEntryAtIndex(bytes4 selector, uint256 idx)
        external
        view
        returns (address impl);
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
/// @dev Basic interface for a feature contract.
interface IFeature {
    // solhint-disable func-name-mixedcase
    /// @dev The name of this feature set.
    function FEATURE_NAME() external view returns (string memory name);
    /// @dev The version of this feature set.
    function FEATURE_VERSION() external view returns (uint256 version);
}
// SPDX-License-Identifier: Apache-2.0
/*
  Copyright 2020 ZeroEx Intl.
  Licensed under the Apache License, Version 2.0 (the "License");
  you may not use this file except in compliance with the License.
  You may obtain a copy of the License at
    http://www.apache.org/licenses/LICENSE-2.0
  Unless required by applicable law or agreed to in writing, software
  distributed under the License is distributed on an "AS IS" BASIS,
  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  See the License for the specific language governing permissions and
  limitations under the License.
*/
pragma solidity ^0.6.5;
pragma experimental ABIEncoderV2;
import "@0x/contracts-erc20/contracts/src/v06/IERC20TokenV06.sol";
/// @dev VIP uniswap fill functions.
interface IUniswapFeature {
    /// @dev Efficiently sell directly to uniswap/sushiswap.
    /// @param tokens Sell path.
    /// @param sellAmount of `tokens[0]` Amount to sell.
    /// @param minBuyAmount Minimum amount of `tokens[-1]` to buy.
    /// @param isSushi Use sushiswap if true.
    /// @return buyAmount Amount of `tokens[-1]` bought.
    function sellToUniswap(
        IERC20TokenV06[] calldata tokens,
        uint256 sellAmount,
        uint256 minBuyAmount,
        bool isSushi
    )
        external
        payable
        returns (uint256 buyAmount);
}